target/linux/ramips/dts/WITI.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "MQmaker WiTi";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x10000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         sdhci@10130000 {
  19                 status = "okay";
  20         };
  21
  22         xhci@1E1C0000 {
  23                 status = "okay";
  24         };
  25
  26         palmbus@1E000000 {
  27                 spi@b00 {
  28                         status = "okay";
  29
  30                         m25p80@0 {
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33                                 compatible = "jedec,spi-nor";
  34                                 reg = <0 0>;
  35                                 linux,modalias = "m25p80";
  36                                 spi-max-frequency = <10000000>;
  37
  38                                 partition@0 {
  39                                         label = "u-boot";
  40                                         reg = <0x0 0x30000>;
  41                                         read-only;
  42                                 };
  43
  44                                 partition@30000 {
  45                                         label = "u-boot-env";
  46                                         reg = <0x30000 0x10000>;
  47                                         read-only;
  48                                 };
  49
  50                                 factory: partition@40000 {
  51                                         label = "factory";
  52                                         reg = <0x40000 0x10000>;
  53                                 };
  54
  55                                 partition@50000 {
  56                                         label = "firmware";
  57                                         reg = <0x50000 0xfb0000>;
  58                                 };
  59                         };
  60                 };
  61
  62                 i2c@900 {
  63                         compatible = "ralink,i2c-mt7621";
  64                         reg = <0x900 0x100>;
  65                         #address-cells = <1>;
  66                         #size-cells = <0>;
  67                         pinctrl-names = "default";
  68                         pinctrl-0 = <&i2c_pins>;
  69                         status = "okay";
  70
  71                         pcf8563: rtc@51 {
  72                                 status = "okay";
  73                                 compatible = "nxp,pcf8563";
  74                                 reg = <0x51>;
  75                         };
  76                 };
  77         };
  78
  79         pcie@1e140000 {
  80                 status = "okay";
  81
  82                 pcie0 {
  83                         mt76@0,0 {
  84                                 reg = <0x0000 0 0 0 0>;
  85                                 device_type = "pci";
  86                                 mediatek,mtd-eeprom = <&factory 0x8000>;
  87                                 mediatek,2ghz = <0>;
  88                                 mtd-mac-address = <&factory 0xe000>;
  89                         };
  90                 };
  91
  92                 pcie1 {
  93                         mt76@1,0 {
  94                                 reg = <0x0000 0 0 0 0>;
  95                                 device_type = "pci";
  96                                 mediatek,mtd-eeprom = <&factory 0x0000>;
  97                                 mediatek,5ghz = <0>;
  98                                 mtd-mac-address = <&factory 0xe000>;
  99                         };
 100                 };
 101         };
 102
 103         ethernet@1e100000 {
 104                 mtd-mac-address = <&factory 0xe000>;
 105         };
 106
 107         gpio-keys-polled {
 108                 compatible = "gpio-keys-polled";
 109                 #address-cells = <1>;
 110                 #size-cells = <0>;
 111                 poll-interval = <20>;
 112
 113                 reset {
 114                         label = "reset";
 115                         gpios = <&gpio0 18 1>;
 116                         linux,code = <0x198>;
 117                 };
 118         };
 119
 120         pinctrl {
 121                 state_default: pinctrl0 {
 122                         gpio {
 123                                 ralink,group = "wdt", "rgmii2", "jtag", "mdio";
 124                                 ralink,function = "gpio";
 125                         };
 126                 };
 127         };
 128 };