target/linux/ramips/dts/WHR-600D.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Buffalo WHR-600D";
   8
   9         palmbus@10000000 {
  10                 gpio2: gpio@660 {
  11                         status = "okay";
  12                 };
  13
  14                 spi@b00 {
  15                         status = "okay";
  16
  17                         m25p80@0 {
  18                                 #address-cells = <1>;
  19                                 #size-cells = <1>;
  20                                 compatible = "en25q64";
  21                                 reg = <0 0>;
  22                                 linux,modalias = "m25p80", "mx25l6405d";
  23                                 spi-max-frequency = <10000000>;
  24
  25                                 partition@0 {
  26                                         label = "u-boot";
  27                                         reg = <0x0 0x30000>;
  28                                         read-only;
  29                                 };
  30
  31                                 partition@30000 {
  32                                         label = "u-boot-env";
  33                                         reg = <0x30000 0x10000>;
  34                                         read-only;
  35                                 };
  36
  37                                 factory: partition@40000 {
  38                                         label = "factory";
  39                                         reg = <0x40000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 partition@50000 {
  44                                         label = "firmware";
  45                                         reg = <0x50000 0x5b0000>;
  46                                 };
  47
  48                                 partition@600000 {
  49                                         label = "usercfg";
  50                                         reg = <0x600000 0x100000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         pinctrl {
  57                 state_default: pinctrl0 {
  58                         gpio {
  59                                 ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
  60                                 ralink,function = "gpio";
  61                         };
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&ephy_pins>;
  68
  69                 mtd-mac-address = <&factory 0x4>;
  70                 ralink,port-map = "llllw";
  71         };
  72
  73         gsw@10110000 {
  74                 ralink,port4 = "ephy";
  75         };
  76
  77         wmac@10180000 {
  78                 ralink,mtd-eeprom = <&factory 0>;
  79         };
  80
  81         pcie@10140000 {
  82                 status = "okay";
  83         };
  84
  85         gpio-leds {
  86                 compatible = "gpio-leds";
  87                 power {
  88                         label = "buffalo:red:power";
  89                         gpios = <&gpio0 7 1>;
  90                 };
  91                 status {
  92                         label = "buffalo:green:status";
  93                         gpios = <&gpio0 8 1>;
  94                 };
  95                 power2 {
  96                         label = "buffalo:green:power";
  97                         gpios = <&gpio0 9 1>;
  98                 };
  99                 status2 {
 100                         label = "buffalo:orange:status";
 101                         gpios = <&gpio0 10 1>;
 102                 };
 103                 internet {
 104                         label = "buffalo:green:internet";
 105                         gpios = <&gpio2 17 1>;
 106                 };
 107                 router {
 108                         label = "buffalo:green:router";
 109                         gpios = <&gpio2 18 1>;
 110                 };
 111                 router2 {
 112                         label = "buffalo:orange:router";
 113                         gpios = <&gpio2 19 1>;
 114                 };
 115         };
 116
 117         gpio-keys-polled {
 118                 compatible = "gpio-keys-polled";
 119                 #address-cells = <1>;
 120                 #size-cells = <0>;
 121                 poll-interval = <20>;
 122                 s1 {
 123                         label = "reset";
 124                         gpios = <&gpio2 12 1>;
 125                         linux,code = <0x100>;
 126                 };
 127                 s2 {
 128                         label = "aoss";
 129                         gpios = <&gpio2 13 1>;
 130                         linux,code = <0x101>;
 131                 };
 132                 s3 {
 133                         label = "ap";
 134                         gpios = <&gpio2 14 1>;
 135                         linux,code = <0x102>;
 136                 };
 137                 s4 {
 138                         label = "bridge";
 139                         gpios = <&gpio2 15 1>;
 140                         linux,code = <0x103>;
 141                 };
 142         };
 143 };