target/linux/ramips/dts/WHR-1166D.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Buffalo WHR-1166D";
   8
   9         palmbus@10000000 {
  10                 gpio2: gpio@660 {
  11                         status = "okay";
  12                 };
  13
  14                 spi@b00 {
  15                         status = "okay";
  16
  17                         m25p80@0 {
  18                                 #address-cells = <1>;
  19                                 #size-cells = <1>;
  20                                 compatible = "en25q64";
  21                                 reg = <0 0>;
  22                                 linux,modalias = "m25p80", "mx25l6405d";
  23                                 spi-max-frequency = <10000000>;
  24
  25                                 partition@0 {
  26                                         label = "u-boot";
  27                                         reg = <0x0 0x30000>;
  28                                         read-only;
  29                                 };
  30
  31                                 partition@30000 {
  32                                         label = "u-boot-env";
  33                                         reg = <0x30000 0x10000>;
  34                                         read-only;
  35                                 };
  36
  37                                 factory: partition@40000 {
  38                                         label = "factory";
  39                                         reg = <0x40000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 partition@50000 {
  44                                         label = "firmware";
  45                                         reg = <0x50000 0xeb0000>;
  46                                 };
  47
  48                                 partition@e00000 {
  49                                         label = "usercfg";
  50                                         reg = <0xf00000 0x100000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         pinctrl {
  57                 state_default: pinctrl0 {
  58                         gpio {
  59                                 ralink,group = "i2c", "uartf", "rgmii1", "wled", "nd_sd";
  60                                 ralink,function = "gpio";
  61                         };
  62                 };
  63         };
  64
  65         ethernet@10100000 {
  66                 pinctrl-names = "default";
  67                 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  68
  69                 port@5 {
  70                         status = "okay";
  71                         phy-handle = <&phy5>;
  72                         phy-mode = "rgmii";
  73                 };
  74
  75                 mdio-bus {
  76                         status = "okay";
  77
  78                         phy5: ethernet-phy@5 {
  79                                 reg = <5>;
  80                                 phy-mode = "rgmii";
  81                         };
  82                 };
  83         };
  84
  85         gsw@10110000 {
  86                 ralink,port4 = "ephy";
  87         };
  88
  89         wmac@10180000 {
  90                 ralink,mtd-eeprom = <&factory 0>;
  91         };
  92
  93         pcie@10140000 {
  94                 status = "okay";
  95         };
  96
  97         gpio-leds {
  98                 compatible = "gpio-leds";
  99                 power {
 100                         label = "buffalo:red:power";
 101                         gpios = <&gpio0 7 1>;
 102                 };
 103                 status {
 104                         label = "buffalo:green:status";
 105                         gpios = <&gpio0 8 1>;
 106                 };
 107                 power2 {
 108                         label = "buffalo:green:power";
 109                         gpios = <&gpio0 9 1>;
 110                 };
 111                 status2 {
 112                         label = "buffalo:orange:status";
 113                         gpios = <&gpio0 10 1>;
 114                 };
 115                 internet {
 116                         label = "buffalo:green:internet";
 117                         gpios = <&gpio2 17 1>;
 118                 };
 119                 router {
 120                         label = "buffalo:green:router";
 121                         gpios = <&gpio2 18 1>;
 122                 };
 123                 router2 {
 124                         label = "buffalo:orange:router";
 125                         gpios = <&gpio2 19 1>;
 126                 };
 127         };
 128
 129         gpio-keys-polled {
 130                 compatible = "gpio-keys-polled";
 131                 #address-cells = <1>;
 132                 #size-cells = <0>;
 133                 poll-interval = <20>;
 134                 s1 {
 135                         label = "reset";
 136                         gpios = <&gpio2 12 1>;
 137                         linux,code = <0x100>;
 138                 };
 139                 s2 {
 140                         label = "aoss";
 141                         gpios = <&gpio2 13 1>;
 142                         linux,code = <0x101>;
 143                 };
 144                 s3 {
 145                         label = "ap";
 146                         gpios = <&gpio2 14 1>;
 147                         linux,code = <0x102>;
 148                 };
 149                 s4 {
 150                         label = "bridge";
 151                         gpios = <&gpio2 15 1>;
 152                         linux,code = <0x103>;
 153                 };
 154         };
 155 };