target/linux/ramips/dts/UR-336UN.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "UR-336UN", "ralink,rt3052-soc";
   7         model = "UR-336UN Wireless N router";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26         };
  27
  28         ethernet@10100000 {
  29                 mtd-mac-address = <&factory 0x4004>;
  30         };
  31
  32         esw@10110000 {
  33                 ralink,portmap = <0x2f>;
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38                 3g {
  39                         label = "ur336:green:3g";
  40                         gpios = <&gpio0 9 1>;
  41                 };
  42                 gateway {
  43                         label = "ur336:green:gateway";
  44                         gpios = <&gpio0 11 1>;
  45                 };
  46                 ap {
  47                         label = "ur336:green:ap";
  48                         gpios = <&gpio0 12 1>;
  49                 };
  50                 wps {
  51                         label = "ur336:green:wps";
  52                         gpios = <&gpio0 14 1>;
  53                 };
  54                 station {
  55                         label = "ur336:green:station";
  56                         gpios = <&gpio0 13 1>;
  57                 };
  58         };
  59
  60         gpio-keys-polled {
  61                 compatible = "gpio-keys-polled";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 poll-interval = <20>;
  65                 reset_wps {
  66                         label = "reset_wps";
  67                         gpios = <&gpio0 10 1>;
  68                         linux,code = <0x198>;
  69                 };
  70                 mode {
  71                         label = "mode";
  72                         gpios = <&gpio0 7 1>;
  73                         linux,code = <0x32>;
  74                 };
  75         };
  76
  77         otg@101c0000 {
  78                 status = "okay";
  79         };
  80 };