target/linux/ramips/dts/SL-R7205.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "SL-R7205", "ralink,rt3052-soc";
   7         model = "Skyline SL-R7205 Wireless 3G Router";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27         };
  28
  29         cfi@1f000000 {
  30                 compatible = "cfi-flash";
  31                 reg = <0x1f000000 0x800000>;
  32
  33                 bank-width = <2>;
  34                 device-width = <2>;
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37         };
  38
  39         ethernet@10100000 {
  40                 status = "okay";
  41         };
  42
  43         esw@10110000 {
  44                 status = "okay";
  45                 ralink,portmap = <0x3e>;
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50                 wifi {
  51                         label = "sl-r7205:green:wifi";
  52                         gpios = <&gpio0 7 1>;
  53                 };
  54         };
  55
  56         gpio-keys-polled {
  57                 compatible = "gpio-keys-polled";
  58                 #address-cells = <1>;
  59                 #size-cells = <0>;
  60                 poll-interval = <20>;
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 10 1>;
  64                         linux,code = <0x198>;
  65                 };
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio0 0 1>;
  69                         linux,code = <0x211>;
  70                 };
  71         };
  72
  73         wmac@10180000 {
  74                 status = "okay";
  75         };
  76
  77         otg@101c0000 {
  78                 status = "okay";
  79         };
  80 };