target/linux/ramips/dts/RT-G32-B1.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-G32-B1", "ralink,rt3050-soc";
   7         model = "Asus RT-G32 B1";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         chosen {
  14                 bootargs = "mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
  15         };
  16
  17         palmbus@10000000 {
  18                 sysc@0 {
  19                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  20                         ralink,uartmux = "gpio";
  21                         ralink,wdtmux = <1>;
  22                 };
  23
  24                 gpio0: gpio@600 {
  25                         status = "okay";
  26                 };
  27
  28                 spi@b00 {
  29                         status = "okay";
  30                         m25p80@0 {
  31                                 #address-cells = <1>;
  32                                 #size-cells = <1>;
  33                                 compatible = "mx25l3205d";
  34                                 reg = <0 0>;
  35                                 linux,modalias = "m25p80", "mx25l3205d";
  36                                 spi-max-frequency = <10000000>;
  37                         };
  38                 };
  39         };
  40
  41         ethernet@10100000 {
  42                 status = "okay";
  43         };
  44
  45         esw@10110000 {
  46                 status = "okay";
  47                 ralink,portmap = <0x2f>;
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 poll-interval = <20>;
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&gpio0 10 1>;
  58                         linux,code = <0x198>;
  59                 };
  60                 wps {
  61                         label = "wps";
  62                         gpios = <&gpio0 0 1>;
  63                         linux,code = <0x211>;
  64                 };
  65         };
  66
  67         wmac@10180000 {
  68                 status = "okay";
  69         };
  70 };