target/linux/ramips/dts/RE6500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "Linksys RE6500";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x4000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         palmbus@1E000000 {
  19                 spi@b00 {
  20                         status = "okay";
  21
  22                         m25p80@0 {
  23                                 #address-cells = <1>;
  24                                 #size-cells = <1>;
  25                                 compatible = "jedec,spi-nor";
  26                                 reg = <0 0>;
  27                                 linux,modalias = "m25p80", "en25q64";
  28                                 spi-max-frequency = <10000000>;
  29
  30                                 partition@0 {
  31                                         label = "u-boot";
  32                                         reg = <0x0 0x30000>;
  33                                         read-only;
  34                                 };
  35
  36                                 partition@30000 {
  37                                         label = "u-boot-env";
  38                                         reg = <0x30000 0x10000>;
  39                                         read-only;
  40                                 };
  41
  42                                 factory: partition@40000 {
  43                                         label = "factory";
  44                                         reg = <0x40000 0x10000>;
  45                                         read-only;
  46                                 };
  47
  48                                 partition@50000 {
  49                                         label = "firmware";
  50                                         reg = <0x50000 0x7b0000>;
  51                                 };
  52                         };
  53                 };
  54         };
  55
  56         pinctrl {
  57                 state_default: pinctrl0 {
  58                         gpio {
  59                                 ralink,group = "i2c", "uart2", "uart3", "rgmii2";
  60                                 ralink,function = "gpio";
  61                         };
  62                 };
  63         };
  64
  65         pcie@1e140000 {
  66                 status = "okay";
  67
  68                 pcie0 {
  69                         mt76@0,0 {
  70                                 reg = <0x0000 0 0 0 0>;
  71                                 device_type = "pci";
  72                                 mediatek,mtd-eeprom = <&factory 0x0000>;
  73                                 mediatek,2ghz = <0>;
  74                         };
  75                 };
  76
  77                 pcie1 {
  78                         mt76@1,0 {
  79                                 reg = <0x0000 0 0 0 0>;
  80                                 device_type = "pci";
  81                                 mediatek,mtd-eeprom = <&factory 0x8000>;
  82                                 mediatek,5ghz = <0>;
  83                         };
  84                 };
  85         };
  86
  87         ethernet@1e100000 {
  88                 mtd-mac-address = <&factory 0x2e>;
  89         };
  90
  91         gpio-leds {
  92                 compatible = "gpio-leds";
  93
  94                 wifi {
  95                         label = "re6500:orange:wifi";
  96                         gpios = <&gpio0 0 0>;
  97                 };
  98
  99                 power {
 100                         label = "re6500:white:power";
 101                         gpios = <&gpio0 9 0>;
 102                 };
 103         };
 104
 105         gpio-keys-polled {
 106                 compatible = "gpio-keys-polled";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109                 poll-interval = <20>;
 110
 111                 wps {
 112                         label = "wps";
 113                         gpios = <&gpio0 10 1>;
 114                         linux,code = <0x211>;
 115                 };
 116
 117                 reset {
 118                         label = "reset";
 119                         gpios = <&gpio0 11 0>;
 120                         linux,code = <0x198>;
 121                 };
 122         };
 123 };