target/linux/ramips/dts/OMNI-EMB.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "OMNI-EMB", "ralink,rt3052-soc";
   7         model = "Omnima MiniEMBWiFi";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20                 status {
  21                         label = "emb:green:status";
  22                         gpios = <&gpio0 9 1>;
  23                 };
  24                 wlan {
  25                         label = "emb:green:wlan";
  26                         gpios = <&gpio0 14 1>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <20>;
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio0 12 1>;
  38                         linux,code = <0x198>;
  39                 };
  40         };
  41
  42         cfi@1f000000 {
  43                 compatible = "cfi-flash";
  44                 reg = <0x1f000000 0x800000>;
  45
  46                 bank-width = <2>;
  47                 device-width = <2>;
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50
  51                 partition@0 {
  52                         label = "u-boot";
  53                         reg = <0x0 0x30000>;
  54                         read-only;
  55                 };
  56
  57                 partition@30000 {
  58                         label = "u-boot-env";
  59                         reg = <0x30000 0x10000>;
  60                         read-only;
  61                 };
  62
  63                 factory: partition@40000 {
  64                         label = "factory";
  65                         reg = <0x40000 0x10000>;
  66                         read-only;
  67                 };
  68
  69                 partition@50000 {
  70                         label = "firmware";
  71                         reg = <0x50000 0x7b0000>;
  72                 };
  73         };
  74
  75         esw@10110000 {
  76                 ralink,portmap = <0x2f>;
  77         };
  78
  79         wmac@10180000 {
  80                 ralink,mtd-eeprom = <&factory 0>;
  81         };
  82
  83         otg@101c0000 {
  84                 status = "okay";
  85         };
  86 };