target/linux/ramips/dts/M3.dts

   1 /dts-v1/;
   2
   3 /include/ "rt5350.dtsi"
   4
   5 / {
   6         compatible = "M3", "ralink,rt5350-soc";
   7         model = "Poray M3";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
  12                         ralink,gpiomux = "jtag";
  13                         ralink,uartmux = "gpio";
  14                         ralink,wdtmux = <1>;
  15                 };
  16
  17                 gpio0: gpio@600 {
  18                         status = "okay";
  19                 };
  20
  21                 spi@b00 {
  22                         status = "okay";
  23                         m25p80@0 {
  24                                 #address-cells = <1>;
  25                                 #size-cells = <1>;
  26                                 compatible = "w25q32";
  27                                 reg = <0 0>;
  28                                 linux,modalias = "m25p80", "w25q32";
  29                                 spi-max-frequency = <10000000>;
  30
  31                                 partition@0 {
  32                                         label = "u-boot";
  33                                         reg = <0x0 0x30000>;
  34                                         read-only;
  35                                 };
  36
  37                                 partition@30000 {
  38                                         label = "u-boot-env";
  39                                         reg = <0x30000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 factory: partition@40000 {
  44                                         label = "factory";
  45                                         reg = <0x40000 0x10000>;
  46                                         read-only;
  47                                 };
  48
  49                                 partition@50000 {
  50                                         label = "firmware";
  51                                         reg = <0x50000 0x3b0000>;
  52                                 };
  53                         };
  54                 };
  55         };
  56
  57         ethernet@10100000 {
  58                 status = "okay";
  59         };
  60
  61         esw@10110000 {
  62                 status = "okay";
  63                 ralink,portmap = <0x2f>;
  64                 ralink,led_polarity = <1>;
  65         };
  66
  67         gpio-leds {
  68                 compatible = "gpio-leds";
  69                 status {
  70                         label = "m3:blue:status";
  71                         gpios = <&gpio0 9 1>;
  72                 };
  73         };
  74
  75         gpio-keys-polled {
  76                 compatible = "gpio-keys-polled";
  77                 #address-cells = <1>;
  78                 #size-cells = <0>;
  79                 poll-interval = <20>;
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio0 10 1>;
  83                         linux,code = <0x198>;
  84                 };
  85                 mode {
  86                         label = "mode";
  87                         gpios = <&gpio0 17 1>;
  88                         linux,code = <0x100>;
  89                         linux,input-type = <5>;
  90                 };
  91         };
  92
  93         wmac@10180000 {
  94                 status = "okay";
  95                 ralink,mtd-eeprom = <&factory 0>;
  96                 ralink,led-polarity = <1>;
  97         };
  98
  99         ehci@101c0000 {
 100                 status = "okay";
 101         };
 102
 103         ohci@101c1000 {
 104                 status = "okay";
 105         };
 106 };