target/linux/ramips/dts/M2M.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "M2M", "ralink,rt5350-soc";
   7         model = "Intenso Memory 2 Move";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
  11         };
  12
  13         palmbus@10000000 {
  14                 spi@b00 {
  15                         status = "okay";
  16
  17                         m25p80@0 {
  18                                 #address-cells = <1>;
  19                                 #size-cells = <1>;
  20                                 compatible = "jedec,spi-nor";
  21                                 reg = <0 0>;
  22                                 linux,modalias = "m25p80", "mx25l6405d";
  23                                 spi-max-frequency = <10000000>;
  24
  25                                 partition@0 {
  26                                         label = "Bootloader";
  27                                         reg = <0x0 0x30000>;
  28                                         read-only;
  29                                 };
  30
  31                                 partition@30000 {
  32                                         label = "Config";
  33                                         reg = <0x30000 0x10000>;
  34                                         read-only;
  35                                 };
  36
  37                                 factory: partition@40000 {
  38                                         label = "Factory";
  39                                         reg = <0x40000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 partition@50000 {
  44                                         label = "firmware";
  45                                         reg = <0x50000 0x7b0000>;
  46                                 };
  47                         };
  48                 };
  49         };
  50
  51         pinctrl {
  52                 state_default: pinctrl0 {
  53                         gpio {
  54                                 ralink,group = "i2c", "uartf";
  55                                 ralink,function = "gpio";
  56                         };
  57                 };
  58         };
  59
  60         gpio-leds {
  61                 compatible = "gpio-leds";
  62
  63                 wifi {
  64                         label = "m2m:blue:wifi";
  65                         gpios = <&gpio0 7 1>;
  66                 };
  67
  68                 wan {
  69                         label = "m2m:green:wan";
  70                         gpios = <&gpio0 12 1>;
  71                 };
  72         };
  73
  74         gpio-keys-polled {
  75                 compatible = "gpio-keys-polled";
  76                 #address-cells = <1>;
  77                 #size-cells = <0>;
  78                 poll-interval = <20>;
  79
  80                 power {
  81                         label = "power";
  82                         gpios = <&gpio0 1 1>;
  83                         linux,code = <0x116>;
  84                 };
  85
  86                 reset {
  87                         label = "reset";
  88                         gpios = <&gpio0 10 1>;
  89                         linux,code = <0x198>;
  90                 };
  91         };
  92
  93         ethernet@10100000 {
  94                 mtd-mac-address = <&factory 0x28>;
  95         };
  96
  97         esw@10110000 {
  98                 mediatek,portmap = <0x2f>;
  99         };
 100
 101         ehci@101c0000 {
 102                 status = "okay";
 103         };
 104
 105         ohci@101c1000 {
 106                 status = "okay";
 107         };
 108
 109         wmac@10180000 {
 110                 ralink,mtd-eeprom = <&factory 0x0>;
 111         };
 112 };