target/linux/ramips/dts/FONERA20N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "FONERA20N", "ralink,rt3052-soc";
   7         model = "La Fonera 2.0N";
   8
   9         palmbus@10000000 {
  10                 sysc@0 {
  11                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  12                         ralink,uartmux = "gpio";
  13                         ralink,wdtmux = <1>;
  14                 };
  15
  16                 gpio0: gpio@600 {
  17                         status = "okay";
  18                 };
  19
  20         };
  21
  22         cfi@1f000000 {
  23                 compatible = "cfi-flash";
  24                 reg = <0x1f000000 0x800000>;
  25
  26                 bank-width = <2>;
  27                 device-width = <2>;
  28                 #address-cells = <1>;
  29                 #size-cells = <1>;
  30
  31                 partition@0 {
  32                         label = "u-boot";
  33                         reg = <0x0 0x30000>;
  34                         read-only;
  35                 };
  36
  37                 partition@30000 {
  38                         label = "u-boot-env";
  39                         reg = <0x30000 0x10000>;
  40                         read-only;
  41                 };
  42
  43                 factory: partition@40000 {
  44                         label = "factory";
  45                         reg = <0x40000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 partition@50000 {
  50                         label = "firmware";
  51                         reg = <0x50000 0x7b0000>;
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57                 wifi {
  58                         label = "fonera20n:orange:wifi";
  59                         gpios = <&gpio0 7 1>;
  60                 };
  61                 power {
  62                         label = "fonera20n:green:power";
  63                         gpios = <&gpio0 9 1>;
  64                 };
  65                 usb {
  66                         label = "fonera20n:orange:usb";
  67                         gpios = <&gpio0 14 1>;
  68                 };
  69         };
  70
  71         gpio-keys-polled {
  72                 compatible = "gpio-keys-polled";
  73                 #address-cells = <1>;
  74                 #size-cells = <0>;
  75                 poll-interval = <20>;
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&gpio0 12 1>;
  79                         linux,code = <0x198>;
  80                 };
  81                 switch {
  82                         label = "switch";
  83                         gpios = <&gpio0 13 1>;
  84                         linux,code = <0x101>;
  85                 };
  86         };
  87
  88         ethernet@10100000 {
  89                 status = "okay";
  90         };
  91
  92         esw@10110000 {
  93                 status = "okay";
  94                 ralink,portmap = <0x2f>;
  95
  96                 port@0 {
  97                         conpatible = "swconfig,port";
  98                         swconfig,segment = "lan";
  99                         swconfig,portmap = <0 4>;
 100                 };
 101                 port@1 {
 102                         conpatible = "swconfig,port";
 103                         swconfig,segment = "lan";
 104                         swconfig,portmap = <1 3>;
 105                 };
 106                 port@2 {
 107                         conpatible = "swconfig,port";
 108                         swconfig,segment = "lan";
 109                         swconfig,portmap = <2 2>;
 110                 };
 111                 port@3 {
 112                         conpatible = "swconfig,port";
 113                         swconfig,segment = "lan";
 114                         swconfig,portmap = <3 1>;
 115                 };
 116                 port@4 {
 117                         conpatible = "swconfig,port";
 118                         swconfig,segment = "lan";
 119                         swconfig,portmap = <4 0>;
 120                 };
 121         };
 122
 123         wmac@10180000 {
 124                 status = "okay";
 125         };
 126
 127         otg@101c0000 {
 128                 status = "okay";
 129         };
 130 };