target/linux/ramips/dts/DIR-810L.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "dlink,dir-810l", "ralink,mt7620a-soc";
   7         model = "D-Link DIR-810L";
   8
   9         palmbus@10000000 {
  10                 spi@b00 {
  11                         status = "okay";
  12
  13                         m25p80@0 {
  14                                 #address-cells = <1>;
  15                                 #size-cells = <1>;
  16                                 compatible = "mx25l6405d";
  17                                 reg = <0 0>;
  18                                 linux,modalias = "m25p80";
  19                                 spi-max-frequency = <10000000>;
  20
  21                                 partition@0 {
  22                                         label = "u-boot";
  23                                         reg = <0x0 0x30000>;
  24                                         read-only;
  25                                 };
  26
  27                                 partition@30000 {
  28                                         label = "u-boot-env";
  29                                         reg = <0x30000 0x10000>;
  30                                         read-only;
  31                                 };
  32
  33                                 factory: partition@40000 {
  34                                         label = "factory";
  35                                         reg = <0x40000 0x10000>;
  36                                         read-only;
  37                                 };
  38
  39                                 factory5g: partition@50000 {
  40                                         label = "factory5g";
  41                                         reg = <0x50000 0x10000>;
  42                                         read-only;
  43                                 };
  44
  45                                 partition@60000 {
  46                                         label = "Wolf_Config";
  47                                         reg = <0x60000 0x10000>;
  48                                         read-only;
  49                                 };
  50
  51                                 partition@70000 {
  52                                         label = "MyDlink";
  53                                         reg = <0x70000 0x80000>;
  54                                         read-only;
  55                                 };
  56
  57                                 partition@e0000 {
  58                                         label = "Jffs2";
  59                                         reg = <0xe0000 0x80000>;
  60                                         read-only;
  61                                 };
  62
  63                                 partition@170000 {
  64                                         label = "firmware";
  65                                         reg = <0x170000 0x690000>;
  66                                 };
  67                         };
  68                 };
  69         };
  70
  71         pinctrl {
  72                 state_default: pinctrl0 {
  73                         gpio {
  74                                 ralink,group = "mdio", "rgmii1", "i2c", "wled", "uartf";
  75                                 ralink,function = "gpio";
  76                         };
  77                 };
  78         };
  79
  80         ethernet@10100000 {
  81                 mtd-mac-address = <&factory 0x28>;
  82                 ralink,port-map = "llllw";
  83         };
  84
  85         gsw@10110000 {
  86                 ralink,port4 = "ephy";
  87
  88                 pinctrl-names = "default";
  89                 pinctrl-0 = <&ephy_pins>;
  90         };
  91
  92         pcie@10140000 {
  93                 status = "okay";
  94         };
  95
  96         gpio-keys-polled {
  97                 compatible = "gpio-keys-polled";
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100                 poll-interval = <20>;
 101                 reset {
 102                         label = "reset";
 103                         gpios = <&gpio0 1 1>;
 104                         linux,code = <0x100>;
 105                 };
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&gpio0 2 1>;
 109                         linux,code = <0x100>;
 110                 };
 111         };
 112
 113         gpio-leds {
 114                 compatible = "gpio-leds";
 115                 power {
 116                         label = "dlink:green:power";
 117                         gpios = <&gpio0 9 0>;
 118                 };
 119                 internet {
 120                         label = "asus:yellow:internet";
 121                         gpios = <&gpio0 12 0>;
 122                 };
 123                 status {
 124                         label = "asus:internet:status";
 125                         gpios = <&gpio0 13 0>;
 126                 };
 127         };
 128 };