target/linux/ramips/dts/DCS-930.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DCS-930", "ralink,rt3050-soc";
   7         model = "D-Link DCS-930";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x400000>;
  21                 bank-width = <2>;
  22                 device-width = <2>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 partition@0 {
  27                         label = "u-boot";
  28                         reg = <0x0 0x30000>;
  29                         read-only;
  30                 };
  31
  32                 partition@30000 {
  33                         label = "u-boot-env";
  34                         reg = <0x30000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 factory: partition@40000 {
  39                         label = "factory";
  40                         reg = <0x40000 0x10000>;
  41                         read-only;
  42                 };
  43
  44                 partition@50000 {
  45                         label = "kernel";
  46                         reg = <0x50000 0x150000>;
  47                 };
  48
  49                 partition@150000 {
  50                         label = "rootfs";
  51                         reg = <0x150000 0x2b0000>;
  52                 };
  53
  54                 partition {
  55                         label = "firmware";
  56                         reg = <0x50000 0x3b0000>;
  57                 };
  58         };
  59
  60         gpio-leds {
  61                 compatible = "gpio-leds";
  62
  63                 wifi {
  64                         label = "dcs-930:red:alert";
  65                         gpios = <&gpio0 8 1>;
  66                 };
  67
  68                 power {
  69                         label = "dcs-930:green:status";
  70                         gpios = <&gpio0 9 1>;
  71                 };
  72
  73                 wps {
  74                         label = "dcs-930:blue:wps";
  75                         gpios = <&gpio0 13 1>;
  76                 };
  77         };
  78
  79         gpio-keys-polled {
  80                 compatible = "gpio-keys-polled";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83                 poll-interval = <20>;
  84
  85                 wps {
  86                         label = "wps";
  87                         gpios = <&gpio0 0 1>;
  88                         linux,code = <0x101>;
  89                 };
  90
  91                 reset {
  92                         label = "reset";
  93                         gpios = <&gpio0 10 1>;
  94                         linux,code = <0x198>;
  95                 };
  96         };
  97
  98         ethernet@10100000 {
  99                 mtd-mac-address = <&factory 0x4>;
 100         };
 101
 102         esw@10110000 {
 103                 mediatek,portmap = <0x2f>;
 104         };
 105
 106         wmac@10180000 {
 107                 ralink,mtd-eeprom = <&factory 0>;
 108         };
 109
 110         otg@101c0000 {
 111                 status = "okay";
 112         };
 113 };