target/linux/ramips/dts/DCS-930.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DCS-930", "ralink,rt3050-soc";
   7         model = "D-Link DCS-930";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x400000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "kernel";
  47                         reg = <0x50000 0x150000>;
  48                 };
  49
  50                 partition@150000 {
  51                         label = "rootfs";
  52                         reg = <0x150000 0x2b0000>;
  53                 };
  54
  55                 partition {
  56                         label = "firmware";
  57                         reg = <0x50000 0x3b0000>;
  58                 };
  59         };
  60
  61         gpio-leds {
  62                 compatible = "gpio-leds";
  63                 wifi {
  64                         label = "d-link:red:alert";
  65                         gpios = <&gpio0 8 1>;
  66                 };
  67                 power {
  68                         label = "d-link:green:status";
  69                         gpios = <&gpio0 9 1>;
  70                 };
  71                 wps {
  72                         label = "d-link:blue:wps";
  73                         gpios = <&gpio0 13 1>;
  74                 };
  75         };
  76
  77         gpio-keys-polled {
  78                 compatible = "gpio-keys-polled";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81                 poll-interval = <20>;
  82
  83                 wps {
  84                         label = "wps";
  85                         gpios = <&gpio0 0 1>;
  86                         linux,code = <0x101>;
  87                 };
  88                 reset {
  89                         label = "reset";
  90                         gpios = <&gpio0 10 1>;
  91                         linux,code = <0x198>;
  92                 };
  93         };
  94
  95         ethernet@10100000 {
  96                 mtd-mac-address = <&factory 0x4>;
  97         };
  98
  99         esw@10110000 {
 100                 ralink,portmap = <0x2f>;
 101         };
 102
 103         wmac@10180000 {
 104                 ralink,mtd-eeprom = <&factory 0>;
 105         };
 106
 107         otg@101c0000 {
 108                 status = "okay";
 109         };
 110 };