[ramips] move memory detect node to dtsi files
[openwrt.git] / target / linux / ramips / dts / DAP-1350.dts
1 /dts-v1/;
2
3 /include/ "rt3050.dtsi"
4
5 / {
6         compatible = "DAP-1350", "ralink,rt3052-soc";
7         model = "D-Link DAP-1350";
8
9         chosen {
10                 bootargs = "console=ttyS0,115200";
11         };
12
13         palmbus@10000000 {
14                 sysc@0 {
15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
16                         ralink,uartmux = "gpio";
17                         ralink,wdtmux = <1>;
18                 };
19
20                 gpio0: gpio@600 {
21                         status = "okay";
22                 };
23
24         };
25
26         cfi@1f000000 {
27                 compatible = "cfi-flash";
28                 reg = <0x1f000000 0x800000>;
29
30                 bank-width = <2>;
31                 device-width = <2>;
32                 #address-cells = <1>;
33                 #size-cells = <1>;
34
35                 partition@0 {
36                         label = "u-boot";
37                         reg = <0x0 0x30000>;
38                         read-only;
39                 };
40
41                 partition@30000 {
42                         label = "devdata";
43                         reg = <0x30000 0x10000>;
44                         read-only;
45                 };
46
47                 partition@40000 {
48                         label = "devconf";
49                         reg = <0x40000 0x30000>;
50                         read-only;
51                 };
52
53                 partition@70000 {
54                         label = "devlang";
55                         reg = <0x70000 0x40000>;
56                         read-only;
57                 };
58
59                 partition@b0000 {
60                         label = "firmware";
61                         reg = <0xb0000 0x750000>;
62                 };
63         };
64
65         ethernet@10100000 {
66                 status = "okay";
67         };
68
69         esw@10110000 {
70                 status = "okay";
71                 ralink,portmap = <0x2f>;
72         };
73
74         gpio-leds {
75                 compatible = "gpio-leds";
76                 power {
77                         label = "d-link:blue:power";
78                         gpios = <&gpio0 8 1>;
79                 };
80                 power2 {
81                         label = "d-link:red:power";
82                         gpios = <&gpio0 9 1>;
83                 };
84                 wps {
85                         label = "d-link:blue:wps";
86                         gpios = <&gpio0 14 1>;
87                 };
88         };
89
90         gpio-keys-polled {
91                 compatible = "gpio-keys-polled";
92                 #address-cells = <1>;
93                 #size-cells = <0>;
94                 poll-interval = <20>;
95                 reset {
96                         label = "reset";
97                         gpios = <&gpio0 10 1>;
98                         linux,code = <0x198>;
99                 };
100                 wps {
101                         label = "wps";
102                         gpios = <&gpio0 0 1>;
103                         linux,code = <0x211>;
104                 };
105                 rt {
106                         label = "rt";
107                         gpios = <&gpio0 11 1>;
108                         linux,code = <0x100>;
109                 };
110                 ap {
111                         label = "ap";
112                         gpios = <&gpio0 7 1>;
113                         linux,code = <0x101>;
114                 };
115         };
116
117         wmac@10180000 {
118                 status = "okay";
119         };
120
121         otg@101c0000 {
122                 status = "okay";
123         };
124 };