target/linux/ramips/dts/CY-SWR1100.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3883.dtsi"
   4
   5 / {
   6         compatible = "CY-SWR1100", "ralink,rt3883-soc";
   7         model = "Samsung CY-SWR1100";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "i2c", "spi";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@10100000 {
  25                 mtd-mac-address = <&factory 0x66>;
  26                 port@0 {
  27                         ralink,fixed-link = <1000 1 1 1>;
  28                 };
  29         };
  30
  31         pci@10140000 {
  32                 status = "okay";
  33
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&pci_pins>;
  36                 pci_pins: pci {
  37                         pci {
  38                                 ralink,group = "pci";
  39                                 ralink,function = "pci-fnc";
  40                         };
  41                 };
  42
  43                 host-bridge {
  44                         pci-bridge@1 {
  45                                 status = "okay";
  46                         };
  47                 };
  48         };
  49
  50         wmac@10180000 {
  51                 status = "okay";
  52                 ralink,mtd-eeprom = <&factory 0>;
  53         };
  54
  55         ehci@101c0000 {
  56                 status = "okay";
  57         };
  58
  59         ohci@101c1000 {
  60                 status = "okay";
  61         };
  62
  63         nor-flash@1c000000 {
  64                 compatible = "cfi-flash";
  65                 reg = <0x1c000000 0x800000>;
  66
  67                 bank-width = <2>;
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70
  71                 partition@0 {
  72                         label = "uboot";
  73                         reg = <0x0 0x30000>;
  74                         read-only;
  75                 };
  76                 partition@30000 {
  77                         label = "uboot-env";
  78                         reg = <0x30000 0x4000>;
  79                         read-only;
  80                 };
  81                 factory: partition@34000 {
  82                         label = "factory";
  83                         reg = <0x34000 0x4000>;
  84                         read-only;
  85                 };
  86                 partition@38000 {
  87                         label = "nvram";
  88                         reg = <0x38000 0x8000>;
  89                         read-only;
  90                 };
  91                 partition@40000 {
  92                         label = "devdata";
  93                         reg = <0x40000 0x10000>;
  94                 };
  95                 partition@50000 {
  96                         label = "firmware";
  97                         reg = <0x50000 0x7b0000>;
  98                 };
  99         };
 100
 101         rtl8367 {
 102                 compatible = "realtek,rtl8367";
 103                 gpio-sda = <&gpio0 1 0>;
 104                 gpio-sck = <&gpio0 2 0>;
 105                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
 106         };
 107
 108         gpio-keys-polled {
 109                 compatible = "gpio-keys-polled";
 110                 #address-cells = <1>;
 111                 #size-cells = <0>;
 112                 poll-interval = <100>;
 113                 reset {
 114                         label = "reset";
 115                         gpios = <&gpio0 6 1>;
 116                         linux,code = <0x198>;
 117                 };
 118                 wps {
 119                         label = "wps";
 120                         gpios = <&gpio0 3 1>;
 121                         linux,code = <0x211>;
 122                 };
 123         };
 124
 125         gpio-leds {
 126                 compatible = "gpio-leds";
 127                 wps {
 128                         label = "samsung:blue:wps";
 129                         gpios = <&gpio0 0 1>;
 130                 };
 131                 usb {
 132                         label = "samsung:blue:usb";
 133                         gpios = <&gpio1 1 1>;
 134                 };
 135         };
 136 };