target/linux/ramips/dts/3G-6200NL.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "3G-6200NL", "ralink,rt3050-soc";
   7         model = "Edimax 3g-6200nl";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@3e0000 {
  46                         label = "cimage";
  47                         reg = <0x3e0000 0x20000>;
  48                         read-only;
  49                 };
  50
  51                 partition@50000 {
  52                         label = "firmware";
  53                         reg = <0x50000 0x390000>;
  54                 };
  55         };
  56
  57         esw@10110000 {
  58                 ralink,portmap = <0x2f>;
  59         };
  60
  61         wmac@10180000 {
  62                 ralink,mtd-eeprom = <&factory 0>;
  63         };
  64
  65         gpio-leds {
  66                 compatible = "gpio-leds";
  67                 wlan {
  68                         label = "edimax:amber:wlan";
  69                         gpios = <&gpio0 14 1>;
  70                 };
  71         };
  72
  73         gpio-keys-polled {
  74                 compatible = "gpio-keys-polled";
  75                 #address-cells = <1>;
  76                 #size-cells = <0>;
  77                 poll-interval = <20>;
  78                 wps {
  79                         label = "wps";
  80                         gpios = <&gpio0 12 1>;
  81                         linux,code = <0x211>;
  82                 };
  83         };
  84
  85         otg@101c0000 {
  86                 status = "okay";
  87         };
  88 };