target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         argus-atp52b | \
  20         b2c | \
  21         f5d8235-v2 | \
  22         nw718 | \
  23         w502u)
  24                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  25                 ;;
  26
  27         wl-351)
  28                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  29                 ucidef_add_switch "rtl8366rb" "1" "1"
  30                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  31                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  32                 ;;
  33
  34         wli-tx4-ag300n)
  35                 ucidef_set_interface_lan "eth0"
  36                 ;;
  37
  38         f5d8235-v1 | \
  39         rt-n15)
  40                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  41                 ucidef_add_switch "rtl8366s" "1" "1"
  42                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  43                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  44                 ;;
  45
  46         *)
  47                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  48                 if [ -n "${RT3X5X}" ]; then
  49                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  50                 else
  51                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  52                 fi
  53                 ;;
  54         esac
  55 }
  56
  57 ramips_setup_macs()
  58 {
  59         local board="$1"
  60         local lan_mac=""
  61         local wan_mac=""
  62
  63         case $board in
  64         f5d8235-v2)
  65                 lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
  66                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  67                 ;;
  68
  69         argus-atp52b | \
  70         b2c | \
  71         f5d8235-v1 | \
  72         nw718 | \
  73         rt-n15 | \
  74         wl-351)
  75                 lan_mac=$(ramips_get_mac_binary factory 4)
  76                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  77                 ;;
  78
  79         dir-300-b1 |\
  80         dir-300-b2 |\
  81         dir-600-b1)
  82                 lan_mac=$(ramips_get_mac_binary devdata 16388)
  83                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  84                 ;;
  85
  86         esr-9753 | \
  87         nbg-419n)
  88                 lan_mac=$(ramips_get_mac_binary factory 4)
  89                 wan_mac=$(ramips_get_mac_binary factory 40)
  90                 ;;
  91
  92         w502u)
  93                 lan_mac=$(ramips_get_mac_binary factory 40)
  94                 wan_mac=$(ramips_get_mac_binary factory 46)
  95                 ;;
  96
  97         wli-tx4-ag300n)
  98                 lan_mac=$(ramips_get_mac_binary factory 4)
  99                 ;;
 100
 101         esac
 102
 103         [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
 104         [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
 105 }
 106
 107 [ -e /etc/config/network ] && exit 0
 108
 109 touch /etc/config/network
 110
 111 board=$(ramips_board_name)
 112
 113 ramips_setup_interfaces $board
 114 ramips_setup_macs $board
 115
 116 uci commit network
 117
 118 exit 0