target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         all0256n)
  20                 ucidef_set_interface_lan "eth0.1"
  21                 ;;
  22
  23         argus-atp52b | \
  24         b2c | \
  25         nw718 | \
  26         w502u | \
  27         wr6202)
  28                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  29                 ;;
  30
  31         f5d8235-v1 | \
  32         rt-n15)
  33                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  34                 ucidef_add_switch "rtl8366s" "1" "1"
  35                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  36                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  37                 ;;
  38
  39         f5d8235-v2)
  40                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  41                 ucidef_add_switch "rtl8366rb" "1" "1"
  42                 ucidef_add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
  43                 ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t"
  44                 ;;
  45
  46         rt-n56u)
  47                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  48                 ucidef_add_switch "switch0" "1" "1"
  49                 ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
  50                 ucidef_add_switch_vlan "switch0" "2" "4 8t"
  51                 ;;
  52
  53         v11st-fe)
  54                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  55                 ucidef_add_switch "switch0" "1" "1"
  56                 ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
  57                 ucidef_add_switch_vlan "switch0" "2" "0 5t"
  58                 ;;
  59
  60         wcr-150gn)
  61                 ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
  62                 ;;
  63
  64         wl-351)
  65                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  66                 ucidef_add_switch "rtl8366rb" "1" "1"
  67                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  68                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  69                 ;;
  70
  71         wli-tx4-ag300n)
  72                 ucidef_set_interface_lan "eth0"
  73                 ;;
  74
  75         *)
  76                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  77                 if [ -n "${RT3X5X}" ]; then
  78                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  79                 else
  80                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  81                 fi
  82                 ;;
  83         esac
  84 }
  85
  86 ramips_setup_macs()
  87 {
  88         local board="$1"
  89         local lan_mac=""
  90         local wan_mac=""
  91
  92         case $board in
  93         all0256n)
  94                 lan_mac=$(ramips_get_mac_binary factory 40)
  95                 ;;
  96
  97         argus-atp52b | \
  98         b2c | \
  99         f5d8235-v1 | \
 100         nw718 | \
 101         rt-n15 | \
 102         wl-351)
 103                 lan_mac=$(ramips_get_mac_binary factory 4)
 104                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 105                 ;;
 106
 107         dir-300-b1 |\
 108         dir-300-b2 |\
 109         dir-600-b1)
 110                 lan_mac=$(ramips_get_mac_binary devdata 16388)
 111                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 112                 ;;
 113
 114         esr-9753 | \
 115         nbg-419n | \
 116         wcr-150gn)
 117                 lan_mac=$(ramips_get_mac_binary factory 4)
 118                 wan_mac=$(ramips_get_mac_binary factory 40)
 119                 ;;
 120
 121         f5d8235-v2)
 122                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
 123                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 124                 ;;
 125
 126         rt-n56u)
 127                 lan_mac=$(ramips_get_mac_binary factory 4)
 128                 wan_mac=$(ramips_get_mac_binary factory 32772)
 129                 ;;
 130
 131         w502u)
 132                 lan_mac=$(ramips_get_mac_binary factory 40)
 133                 wan_mac=$(ramips_get_mac_binary factory 46)
 134                 ;;
 135
 136         wl341v3)
 137                 lan_mac=$(ramips_get_mac_binary board-nvram 65440)
 138                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 139                 ;;
 140
 141         wli-tx4-ag300n)
 142                 lan_mac=$(ramips_get_mac_binary factory 4)
 143                 ;;
 144
 145         esac
 146
 147         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 148         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 149 }
 150
 151 [ -e /etc/config/network ] && exit 0
 152
 153 touch /etc/config/network
 154
 155 board=$(ramips_board_name)
 156
 157 ramips_setup_interfaces $board
 158 ramips_setup_macs $board
 159
 160 uci commit network
 161
 162 exit 0