target/linux/pxa/patches-2.6.21/018-modular-init-smc91x.patch

   1 Index: linux-2.6.21.7/drivers/net/Kconfig
   2 ===================================================================
   3 --- linux-2.6.21.7.orig/drivers/net/Kconfig
   4 +++ linux-2.6.21.7/drivers/net/Kconfig
   5 @@ -959,6 +959,12 @@ config SMC91X
   6           module, say M here and read <file:Documentation/modules.txt> as well
   7           as <file:Documentation/networking/net-modules.txt>.
   8
   9 +config SMC91X_GUMSTIX
  10 +       tristate
  11 +       default m if SMC91X=m
  12 +       default y if SMC91X=y
  13 +       depends on SMC91X && ARCH_GUMSTIX
  14 +
  15  config SMC9194
  16         tristate "SMC 9194 support"
  17         depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN)
  18 Index: linux-2.6.21.7/drivers/net/Makefile
  19 ===================================================================
  20 --- linux-2.6.21.7.orig/drivers/net/Makefile
  21 +++ linux-2.6.21.7/drivers/net/Makefile
  22 @@ -201,6 +201,7 @@ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
  23
  24  obj-$(CONFIG_MACB) += macb.o
  25
  26 +obj-$(CONFIG_SMC91X_GUMSTIX) += gumstix-smc91x.o
  27  obj-$(CONFIG_ARM) += arm/
  28  obj-$(CONFIG_DEV_APPLETALK) += appletalk/
  29  obj-$(CONFIG_TR) += tokenring/
  30 Index: linux-2.6.21.7/drivers/net/smc91x.c
  31 ===================================================================
  32 --- linux-2.6.21.7.orig/drivers/net/smc91x.c
  33 +++ linux-2.6.21.7/drivers/net/smc91x.c
  34 @@ -2373,6 +2373,10 @@ static struct platform_driver smc_driver
  35         },
  36  };
  37
  38 +#ifdef CONFIG_ARCH_GUMSTIX
  39 +extern void gumstix_smc91x_load(void);
  40 +#endif
  41 +
  42  static int __init smc_init(void)
  43  {
  44  #ifdef MODULE
  45 @@ -2384,6 +2388,10 @@ static int __init smc_init(void)
  46  #endif
  47  #endif
  48
  49 +#ifdef CONFIG_ARCH_GUMSTIX
  50 +       gumstix_smc91x_load();
  51 +#endif
  52 +
  53         return platform_driver_register(&smc_driver);
  54  }
  55
  56 Index: linux-2.6.21.7/drivers/net/gumstix-smc91x.c
  57 ===================================================================
  58 --- /dev/null
  59 +++ linux-2.6.21.7/drivers/net/gumstix-smc91x.c
  60 @@ -0,0 +1,143 @@
  61 +/*
  62 + *  Gumstix SMC91C111 chip intialization driver
  63 + *
  64 + *  Author:     Craig Hughes
  65 + *  Created:    December 9, 2004
  66 + *  Copyright:  (C) 2004 Craig Hughes
  67 + *
  68 + * This program is free software; you can redistribute it and/or modify
  69 + * it under the terms of the GNU General Public License as published by
  70 + * the Free Software Foundation; either version 2 of the License, or
  71 + * (at your option) any later version.
  72 + *
  73 + */
  74 +
  75 +#include <linux/module.h>
  76 +#include <linux/ioport.h>
  77 +#include <linux/device.h>
  78 +#include <linux/platform_device.h>
  79 +#include <linux/delay.h>
  80 +
  81 +#include <asm/hardware.h>
  82 +#include <asm/arch/pxa-regs.h>
  83 +#include <asm/delay.h>
  84 +
  85 +#include <asm/arch/gumstix.h>
  86 +
  87 +#define SMC_DEBUG               0
  88 +#include <asm/io.h>
  89 +#include "smc91x.h"
  90 +
  91 +static struct resource gumstix_smc91x0_resources[] = {
  92 +       [0] = {
  93 +               .name   = "smc91x-regs",
  94 +               .start  = PXA_CS1_PHYS + 0x00000300,
  95 +               .end    = PXA_CS1_PHYS + 0x000fffff,
  96 +               .flags  = IORESOURCE_MEM,
  97 +       },
  98 +       [1] = {
  99 +               .start  = GUMSTIX_ETH0_IRQ,
 100 +               .end    = GUMSTIX_ETH0_IRQ,
 101 +               .flags  = IORESOURCE_IRQ,
 102 +       },
 103 +};
 104 +
 105 +static struct resource gumstix_smc91x1_resources[] = {
 106 +       [0] = {
 107 +               .name   = "smc91x-regs",
 108 +               .start  = PXA_CS2_PHYS + 0x00000300,
 109 +               .end    = PXA_CS2_PHYS + 0x000fffff,
 110 +               .flags  = IORESOURCE_MEM,
 111 +       },
 112 +       [1] = {
 113 +               .start  = GUMSTIX_ETH1_IRQ,
 114 +               .end    = GUMSTIX_ETH1_IRQ,
 115 +               .flags  = IORESOURCE_IRQ,
 116 +       },
 117 +};
 118 +
 119 +static struct platform_device gumstix_smc91x0_device = {
 120 +       .name           = "smc91x",
 121 +       .id             = 0,
 122 +       .num_resources  = ARRAY_SIZE(gumstix_smc91x0_resources),
 123 +       .resource       = gumstix_smc91x0_resources,
 124 +};
 125 +
 126 +static struct platform_device gumstix_smc91x1_device = {
 127 +       .name           = "smc91x",
 128 +       .id             = 1,
 129 +       .num_resources  = ARRAY_SIZE(gumstix_smc91x1_resources),
 130 +       .resource       = gumstix_smc91x1_resources,
 131 +};
 132 +
 133 +static struct platform_device *smc91x_devices[] = {
 134 +       &gumstix_smc91x0_device,
 135 +       &gumstix_smc91x1_device,
 136 +};
 137 +
 138 +/* First we're going to test if there's a 2nd SMC91C111, and if not, then we'll free up those resources and the GPIO lines
 139 + * that it would otherwise use.  We have no choice but to probe by doing:
 140 + * Set nCS2 to CS2 mode
 141 + * Set the reset line to GPIO out mode, and pull it high, then drop it low (to trigger reset)
 142 + * Read from the memory space to check for the sentinel sequence identifying a likely SMC91C111 device
 143 + */
 144 +int __init gumstix_smc91x_init(void)
 145 +{
 146 +       unsigned int val, num_devices=ARRAY_SIZE(smc91x_devices);
 147 +       void *ioaddr;
 148 +
 149 +       /* Set up nPWE */
 150 +       pxa_gpio_mode(GPIO49_nPWE_MD);
 151 +
 152 +       pxa_gpio_mode(GPIO78_nCS_2_MD);
 153 +       // If either if statement fails, then we'll drop out and turn_off_eth1,
 154 +       // if both succeed, then we'll skip that and just proceed with 2 cards
 155 +       if(request_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT, "smc91x probe"))
 156 +       {
 157 +               ioaddr = ioremap(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
 158 +               val = ioread16(ioaddr + BANK_SELECT);
 159 +               iounmap(ioaddr);
 160 +               release_mem_region(gumstix_smc91x1_resources[0].start, SMC_IO_EXTENT);
 161 +               if ((val & 0xFF00) == 0x3300) {
 162 +                       goto proceed;
 163 +               }
 164 +       }
 165 +
 166 +turn_off_eth1:
 167 +       // This is apparently not an SMC91C111
 168 +       // So, let's decrement the number of devices to request, and reset the GPIO lines to GPIO IN mode
 169 +       num_devices--;
 170 +       smc91x_devices[1] = NULL;
 171 +       pxa_gpio_mode(78 | GPIO_IN);
 172 +
 173 +proceed:
 174 +       pxa_gpio_mode(GPIO15_nCS_1_MD);
 175 +
 176 +       if(smc91x_devices[1]) pxa_gpio_mode(GPIO_GUMSTIX_ETH1_RST_MD);
 177 +       pxa_gpio_mode(GPIO_GUMSTIX_ETH0_RST_MD);
 178 +       if(smc91x_devices[1]) GPSR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
 179 +       GPSR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
 180 +       udelay(1); // Hold RESET for at least 100ns
 181 +       if(smc91x_devices[1]) GPCR(GPIO_GUMSTIX_ETH1_RST) = GPIO_bit(GPIO_GUMSTIX_ETH1_RST);
 182 +       GPCR(GPIO_GUMSTIX_ETH0_RST) = GPIO_bit(GPIO_GUMSTIX_ETH0_RST);
 183 +       msleep(50);
 184 +
 185 +       return platform_add_devices(smc91x_devices, num_devices);
 186 +}
 187 +
 188 +void __exit gumstix_smc91x_exit(void)
 189 +{
 190 +       if(smc91x_devices[1] != NULL) platform_device_unregister(&gumstix_smc91x1_device);
 191 +       platform_device_unregister(&gumstix_smc91x0_device);
 192 +}
 193 +
 194 +void gumstix_smc91x_load(void) {}
 195 +EXPORT_SYMBOL(gumstix_smc91x_load);
 196 +
 197 +module_init(gumstix_smc91x_init);
 198 +module_exit(gumstix_smc91x_exit);
 199 +
 200 +MODULE_LICENSE("GPL");
 201 +MODULE_AUTHOR("Craig Hughes <craig@gumstix.com>");
 202 +MODULE_DESCRIPTION("Gumstix board SMC91C111 chip initialization driver");
 203 +MODULE_VERSION("1:0.1");