target/linux/lantiq/patches-3.0/210-machtypes.patch

   1 Index: linux-3.0.3/arch/mips/lantiq/machtypes.h
   2 ===================================================================
   3 --- linux-3.0.3.orig/arch/mips/lantiq/machtypes.h       2011-10-05 14:32:23.173150836 +0200
   4 +++ linux-3.0.3/arch/mips/lantiq/machtypes.h    2011-10-05 14:32:23.385150846 +0200
   5 @@ -20,9 +20,33 @@
   6         LANTIQ_MACH_EASY98000,          /* Falcon Eval Board, NOR Flash */
   7         LANTIQ_MACH_EASY98000SF,        /* Falcon Eval Board, Serial Flash */
   8         LANTIQ_MACH_EASY98000NAND,      /* Falcon Eval Board, NAND Flash */
   9 +       LANTIQ_MACH_EASY98020,          /* EASY98020 Eval Board */
  10 +       LANTIQ_MACH_EASY98020_1LAN,     /* EASY98020 Eval Board (1 LAN port) */
  11 +       LANTIQ_MACH_EASY98020_2LAN,     /* EASY98020 Eval Board (2 LAN port) */
  12 +       LANTIQ_MACH_95C3AM1,            /* 95C3AM1 Eval Board */
  13
  14         /* FRITZ!BOX */
  15         LANTIQ_MACH_FRITZ3370,          /* FRITZ!BOX 3370 vdsl cpe */
  16 +
  17 +       /* Arcadyan */
  18 +       LANTIQ_MACH_ARV3527P,           /* Arcor easybox a401 */
  19 +       LANTIQ_MACH_ARV4510PW,          /* Wippies Homebox */
  20 +       LANTIQ_MACH_ARV4518PW,          /* Airties WAV-221, SMC-7908A-ISP */
  21 +       LANTIQ_MACH_ARV4520PW,          /* Airties WAV-281, Arcor EasyboxA800 */
  22 +       LANTIQ_MACH_ARV452CPW,          /* Arcor EasyboxA801 */
  23 +       LANTIQ_MACH_ARV4525PW,          /* Speedport W502V */
  24 +       LANTIQ_MACH_ARV752DPW,          /* Arcor easybox a802 */
  25 +       LANTIQ_MACH_ARV752DPW22,        /* Arcor easybox a803 */
  26 +       LANTIQ_MACH_ARV7518PW,          /* ASTORIA */
  27 +
  28 +       /* Netgear */
  29 +       LANTIQ_MACH_DGN3500B,           /* Netgear DGN3500 */
  30 +
  31 +       /* Gigaset */
  32 +       LANTIQ_MACH_GIGASX76X,          /* Gigaset SX76x */
  33 +
  34 +       /* Buffalo */
  35 +       LANTIQ_MACH_WBMR,               /* WBMR-HP-G300H */
  36  };
  37
  38  #endif
  39 Index: linux-3.0.3/arch/mips/lantiq/xway/Kconfig
  40 ===================================================================
  41 --- linux-3.0.3.orig/arch/mips/lantiq/xway/Kconfig      2011-10-05 14:32:23.173150836 +0200
  42 +++ linux-3.0.3/arch/mips/lantiq/xway/Kconfig   2011-10-05 14:32:23.385150846 +0200
  43 @@ -6,6 +6,22 @@
  44         bool "Easy50712 - Danube"
  45         default y
  46
  47 +config LANTIQ_MACH_ARV45XX
  48 +       bool "ARV45XX"
  49 +       default y
  50 +
  51 +config LANTIQ_MACH_NETGEAR
  52 +       bool "Netgear"
  53 +       default y
  54 +
  55 +config LANTIQ_MACH_GIGASX76X
  56 +       bool "GIGASX76X"
  57 +       default y
  58 +
  59 +config LANTIQ_MACH_WBMR
  60 +       bool "WBMR-HP-G300H"
  61 +       default y
  62 +
  63  endmenu
  64
  65  endif
  66 Index: linux-3.0.3/arch/mips/lantiq/xway/Makefile
  67 ===================================================================
  68 --- linux-3.0.3.orig/arch/mips/lantiq/xway/Makefile     2011-10-05 14:32:23.173150836 +0200
  69 +++ linux-3.0.3/arch/mips/lantiq/xway/Makefile  2011-10-05 15:46:10.061340080 +0200
  70 @@ -7,3 +7,7 @@
  71  obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
  72  obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
  73  obj-$(CONFIG_LANTIQ_MACH_FRITZ3370) += mach-fritz.o
  74 +obj-$(CONFIG_LANTIQ_MACH_ARV45XX) += mach-arv45xx.o
  75 +obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
  76 +obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o
  77 +obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o
  78 Index: linux-3.0.3/arch/mips/lantiq/falcon/Kconfig
  79 ===================================================================
  80 --- linux-3.0.3.orig/arch/mips/lantiq/falcon/Kconfig    2011-10-05 14:32:22.745150818 +0200
  81 +++ linux-3.0.3/arch/mips/lantiq/falcon/Kconfig 2011-10-05 14:32:23.385150846 +0200
  82 @@ -6,6 +6,14 @@
  83         bool "Easy98000"
  84         default y
  85
  86 +config LANTIQ_MACH_EASY98020
  87 +       bool "Easy98020"
  88 +       default y
  89 +
  90 +config LANTIQ_MACH_95C3AM1
  91 +       bool "95C3AM1"
  92 +       default y
  93 +
  94  endmenu
  95
  96  endif
  97 Index: linux-3.0.3/arch/mips/lantiq/falcon/Makefile
  98 ===================================================================
  99 --- linux-3.0.3.orig/arch/mips/lantiq/falcon/Makefile   2011-10-05 14:32:23.089150832 +0200
 100 +++ linux-3.0.3/arch/mips/lantiq/falcon/Makefile        2011-10-05 14:32:23.389150846 +0200
 101 @@ -1,2 +1,6 @@
 102  obj-y := clk.o prom.o reset.o sysctrl.o devices.o gpio.o softdog_vpe.o
 103 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += addon-easy98000.o
 104 +obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
 105  obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
 106 +obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
 107 +obj-$(CONFIG_LANTIQ_MACH_95C3AM1)   += mach-95C3AM1.o
 108 Index: linux-3.0.3/arch/mips/lantiq/falcon/mach-easy98000.c
 109 ===================================================================
 110 --- linux-3.0.3.orig/arch/mips/lantiq/falcon/mach-easy98000.c   2011-10-05 15:17:45.445267210 +0200
 111 +++ linux-3.0.3/arch/mips/lantiq/falcon/mach-easy98000.c        2011-10-05 15:45:54.153339399 +0200
 112 @@ -1,23 +1,38 @@
 113 -/*
 114 - *  This program is free software; you can redistribute it and/or modify it
 115 - *  under the terms of the GNU General Public License version 2 as published
 116 - *  by the Free Software Foundation.
 117 - *
 118 - *  Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
 119 - *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
 120 - */
 121 -
 122 +#include <linux/init.h>
 123  #include <linux/platform_device.h>
 124 +#include <linux/leds.h>
 125 +#include <linux/gpio.h>
 126 +#include <linux/gpio_buttons.h>
 127 +#include <linux/etherdevice.h>
 128 +#include <linux/mtd/mtd.h>
 129  #include <linux/mtd/partitions.h>
 130 +#include <linux/mtd/physmap.h>
 131 +#include <linux/input.h>
 132 +#include <linux/interrupt.h>
 133 +#include <linux/dm9000.h>
 134 +#include <linux/i2c.h>
 135 +#include <linux/i2c-gpio.h>
 136  #include <linux/spi/spi.h>
 137  #include <linux/spi/spi_gpio.h>
 138  #include <linux/spi/eeprom.h>
 139 +#include <falcon/lantiq_soc.h>
 140
 141  #include "../machtypes.h"
 142
 143  #include "devices.h"
 144 +#include "dev-leds-gpio.h"
 145 +
 146 +#define EASY98000_GPIO_LED_0 9
 147 +#define EASY98000_GPIO_LED_1 10
 148 +#define EASY98000_GPIO_LED_2 11
 149 +#define EASY98000_GPIO_LED_3 12
 150 +#define EASY98000_GPIO_LED_4 13
 151 +#define EASY98000_GPIO_LED_5 14
 152 +
 153 +extern unsigned char ltq_ethaddr[6];
 154
 155 -static struct mtd_partition easy98000_nor_partitions[] = {
 156 +static struct mtd_partition easy98000_nor_partitions[] =
 157 +{
 158         {
 159                 .name   = "uboot",
 160                 .offset = 0x0,
 161 @@ -35,7 +50,7 @@
 162         },
 163  };
 164
 165 -struct physmap_flash_data easy98000_nor_flash_data = {
 166 +static struct physmap_flash_data easy98000_nor_flash_data = {
 167         .nr_parts       = ARRAY_SIZE(easy98000_nor_partitions),
 168         .parts          = easy98000_nor_partitions,
 169  };
 170 @@ -55,12 +70,105 @@
 171         .platform_data          = &easy98000_spi_flash_platform_data
 172  };
 173
 174 +static struct gpio_led easy98000_leds_gpio[] __initdata = {
 175 +       {
 176 +               .name           = "easy98000:green:0",
 177 +               .gpio           = EASY98000_GPIO_LED_0,
 178 +               .active_low     = 0,
 179 +       }, {
 180 +               .name           = "easy98000:green:1",
 181 +               .gpio           = EASY98000_GPIO_LED_1,
 182 +               .active_low     = 0,
 183 +       }, {
 184 +               .name           = "easy98000:green:2",
 185 +               .gpio           = EASY98000_GPIO_LED_2,
 186 +               .active_low     = 0,
 187 +       }, {
 188 +               .name           = "easy98000:green:3",
 189 +               .gpio           = EASY98000_GPIO_LED_3,
 190 +               .active_low     = 0,
 191 +       }, {
 192 +               .name           = "easy98000:green:4",
 193 +               .gpio           = EASY98000_GPIO_LED_4,
 194 +               .active_low     = 0,
 195 +       }, {
 196 +               .name           = "easy98000:green:5",
 197 +               .gpio           = EASY98000_GPIO_LED_5,
 198 +               .active_low     = 0,
 199 +       }
 200 +};
 201 +
 202 +#define CONFIG_DM9000_BASE             0x14000000
 203 +#define DM9000_IO                      (CONFIG_DM9000_BASE + 3)
 204 +#define DM9000_DATA                    (CONFIG_DM9000_BASE + 1)
 205 +
 206 +static struct dm9000_plat_data dm9000_plat_data = {
 207 +       .flags = DM9000_PLATF_8BITONLY,
 208 +       //.dev_addr = { }, /* possibility to provide an ethernet address for the chip */
 209 +};
 210 +
 211 +static struct resource dm9000_resources[] = {
 212 +       MEM_RES("dm9000_io", DM9000_IO, DM9000_IO),
 213 +       MEM_RES("dm9000_data", DM9000_DATA, DM9000_DATA),
 214 +       [2] = {
 215 +               /* with irq (210 -> gpio 110) the driver is very unreliable */
 216 +               .start  = -1,           /* use polling */
 217 +               .end    = -1,
 218 +               .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 219 +       },
 220 +};
 221 +
 222 +static struct platform_device dm9000_platform = {
 223 +       .name = "dm9000",
 224 +       .id = 0,
 225 +       .num_resources  = ARRAY_SIZE(dm9000_resources),
 226 +       .resource       = dm9000_resources,
 227 +       .dev = {
 228 +               .platform_data = (void *) &dm9000_plat_data,
 229 +       }
 230 +};
 231 +
 232 +extern int easy98000_addon_has_dm9000(void);
 233 +static void __init register_davicom(void)
 234 +{
 235 +       if (!easy98000_addon_has_dm9000())
 236 +               return;
 237 +
 238 +       if (!is_valid_ether_addr(ltq_ethaddr))
 239 +               random_ether_addr(dm9000_plat_data.dev_addr);
 240 +       else {
 241 +               memcpy(dm9000_plat_data.dev_addr, ltq_ethaddr, 6);
 242 +               /* change to "Locally Administered Address" */
 243 +               dm9000_plat_data.dev_addr[0] |= 0x2;
 244 +       }
 245 +       platform_device_register(&dm9000_platform);
 246 +}
 247 +
 248 +static struct i2c_gpio_platform_data easy98000_i2c_gpio_data = {
 249 +       .sda_pin        = 107,
 250 +       .scl_pin        = 108,
 251 +};
 252 +
 253 +static struct platform_device easy98000_i2c_gpio_device = {
 254 +       .name           = "i2c-gpio",
 255 +       .id             = 0,
 256 +       .dev = {
 257 +               .platform_data  = &easy98000_i2c_gpio_data,
 258 +       }
 259 +};
 260 +
 261 +void __init register_easy98000_cpld(void)
 262 +{
 263 +       platform_device_register_simple("easy98000_cpld_led", 0, NULL, 0);
 264 +       platform_device_register_simple("easy98000_addon", 0, NULL, 0);
 265 +}
 266 +
 267  /* setup gpio based spi bus/device for access to the eeprom on the board */
 268 -#define SPI_GPIO_MRST          102
 269 -#define SPI_GPIO_MTSR          103
 270 -#define SPI_GPIO_CLK           104
 271 -#define SPI_GPIO_CS0           105
 272 -#define SPI_GPIO_CS1           106
 273 +#define SPI_GPIO_MRST  102
 274 +#define SPI_GPIO_MTSR  103
 275 +#define SPI_GPIO_CLK   104
 276 +#define SPI_GPIO_CS0   105
 277 +#define SPI_GPIO_CS1   106
 278  #define SPI_GPIO_BUS_NUM       1
 279
 280  static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
 281 @@ -93,29 +201,36 @@
 282         .platform_data          = &at25160n,
 283  };
 284
 285 -static void __init
 286 -easy98000_init_common(void)
 287 +static void __init easy98000_spi_gpio_init(void)
 288  {
 289         spi_register_board_info(&easy98000_spi_gpio_devices, 1);
 290         platform_device_register(&easy98000_spi_gpio_device);
 291  }
 292
 293 -static void __init
 294 -easy98000_init(void)
 295 +static void __init easy98000_init_common(void)
 296 +{
 297 +       falcon_register_i2c();
 298 +       platform_device_register(&easy98000_i2c_gpio_device);
 299 +       register_davicom();
 300 +       ltq_add_device_leds_gpio(-1, ARRAY_SIZE(easy98000_leds_gpio),
 301 +                                       easy98000_leds_gpio);
 302 +       register_easy98000_cpld();
 303 +       easy98000_spi_gpio_init();
 304 +}
 305 +
 306 +static void __init easy98000_init(void)
 307  {
 308         easy98000_init_common();
 309         ltq_register_nor(&easy98000_nor_flash_data);
 310  }
 311
 312 -static void __init
 313 -easy98000sf_init(void)
 314 +static void __init easy98000sf_init(void)
 315  {
 316         easy98000_init_common();
 317         falcon_register_spi_flash(&easy98000_spi_flash_data);
 318  }
 319
 320 -static void __init
 321 -easy98000nand_init(void)
 322 +static void __init easy98000nand_init(void)
 323  {
 324         easy98000_init_common();
 325         falcon_register_nand();