target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VGV7510KW22 - o2 Box 6431";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8         };
   9
  10         memory@0 {
  11                 reg = <0x0 0x4000000>;
  12         };
  13
  14         fpi@10000000 {
  15                 localbus@0 {
  16                         nor-boot@0 {
  17                                 compatible = "lantiq,nor";
  18                                 bank-width = <2>;
  19                                 reg = <0 0x0 0x1000000>;
  20                                 #address-cells = <1>;
  21                                 #size-cells = <1>;
  22
  23                                 boardconfig: partition@fe0000 {
  24                                         label = "board_config";
  25                                         reg = <0xfe0000 0x20000>;
  26                                         read-only;
  27                                 };
  28                         };
  29                 };
  30
  31                 gpio: pinmux@E100B10 {
  32                         pinctrl-names = "default";
  33                         pinctrl-0 = <&state_default>;
  34
  35                         state_default: pinmux {
  36                                 ip101a-rst {
  37                                         lantiq,pins = "io46";
  38                                         lantiq,output = <0>;
  39                                         lantiq,pull = <1>;
  40                                 };
  41                                 gphy-leds {
  42                                         lantiq,groups = "gphy0 led1",
  43                                                         "gphy1 led0", "gphy1 led1";
  44                                         lantiq,function = "gphy";
  45                                         lantiq,open-drain = <0>;
  46                                         lantiq,pull = <0>;
  47                                         lantiq,output = <1>;
  48                                 };
  49                                 stp {
  50                                         lantiq,groups = "stp";
  51                                         lantiq,function = "stp";
  52                                         lantiq,pull = <2>;
  53                                         lantiq,open-drain = <0>;
  54                                         lantiq,output = <1>;
  55                                 };
  56                                 mdio {
  57                                         lantiq,groups = "mdio";
  58                                         lantiq,function = "mdio";
  59                                 };
  60                                 pci-rst {
  61                                         lantiq,pins = "io21";
  62                                         lantiq,open-drain = <0>;
  63                                         lantiq,pull = <0>;
  64                                         lantiq,output = <1>;
  65                                 };
  66                                 spi {
  67                                         lantiq,groups = "spi";
  68                                         lantiq,function = "spi";
  69                                 };
  70                         };
  71                 };
  72
  73                 eth@E108000 {
  74                         #address-cells = <1>;
  75                         #size-cells = <0>;
  76                         compatible = "lantiq,xrx200-net";
  77                         reg = < 0xE108000 0x3000 /* switch */
  78                                 0xE10B100 0x70 /* mdio */
  79                                 0xE10B1D8 0x30 /* mii */
  80                                 0xE10B308 0x30 /* pmac */
  81                         >;
  82                         interrupt-parent = <&icu0>;
  83                         interrupts = <73 72>;
  84
  85                         lan: interface@0 {
  86                                 compatible = "lantiq,xrx200-pdi";
  87                                 #address-cells = <1>;
  88                                 #size-cells = <0>;
  89                                 reg = <0>;
  90                                 mtd-mac-address = <&boardconfig 0x16>;
  91                                 lantiq,switch;
  92
  93                                 ethernet@2 {
  94                                         compatible = "lantiq,xrx200-pdi-port";
  95                                         reg = <2>;
  96                                         phy-mode = "mii";
  97                                         phy-handle = <&phy11>;
  98                                 };
  99                                 ethernet@3 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <3>;
 102                                         phy-mode = "mii";
 103                                         phy-handle = <&phy12>;
 104                                 };
 105                                 ethernet@4 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <4>;
 108                                         phy-mode = "mii";
 109                                         phy-handle = <&phy13>;
 110                                 };
 111                                 ethernet@5 {
 112                                         compatible = "lantiq,xrx200-pdi-port";
 113                                         reg = <5>;
 114                                         phy-mode = "mii";
 115                                         phy-handle = <&phy14>;
 116                                 };
 117                         };
 118
 119                         mdio@0 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 compatible = "lantiq,xrx200-mdio";
 123
 124                                 phy11: ethernet-phy@11 {
 125                                         reg = <0x11>;
 126                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 127                                 };
 128                                 phy12: ethernet-phy@12 {
 129                                         reg = <0x12>;
 130                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 131                                 };
 132                                 phy13: ethernet-phy@13 {
 133                                         reg = <0x13>;
 134                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 135                                 };
 136                                 phy14: ethernet-phy@14 {
 137                                         reg = <0x14>;
 138                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 139                                 };
 140                         };
 141                 };
 142
 143                 stp: stp@E100BB0 {
 144                         compatible = "lantiq,gpio-stp-xway";
 145                         reg = <0xE100BB0 0x40>;
 146                         #gpio-cells = <2>;
 147                         gpio-controller;
 148
 149                         lantiq,shadow = <0xff>;
 150                         lantiq,groups = <0x1>;
 151                         lantiq,dsl = <0x0>;
 152                         lantiq,phy1 = <0x7>;
 153                         lantiq,phy2 = <0x7>; /* enable gphy0 led2 = LAN2 LED */
 154                 };
 155
 156                 ifxhcd@E101000 {
 157                         status = "okay";
 158                         gpios = <&gpio 47 0>;
 159                 };
 160
 161                 pci@E105400 {
 162                         status = "okay";
 163                         lantiq,bus-clock = <33333333>;
 164                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 165                         interrupt-map = <
 166                                 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 30
 167                                 >;
 168                         gpio-reset = <&gpio 21 0>;
 169                         req-mask = <0x1>;       /* GNT1 */
 170                 };
 171
 172                 pcie@d900000 {
 173                         status = "disabled";
 174                 };
 175         };
 176
 177         gphy-xrx200 {
 178                 compatible = "lantiq,phy-xrx200";
 179                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
 180                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 181                 phys = [ 00 01 ];
 182         };
 183
 184         ralink_eep {
 185                 compatible = "ralink,eeprom";
 186                 ralink,eeprom = "RT3062.eeprom";
 187         };
 188
 189         gpio-keys-polled {
 190                 compatible = "gpio-keys-polled";
 191                 #address-cells = <1>;
 192                 #size-cells = <0>;
 193                 poll-interval = <100>;
 194
 195                 reset {
 196                         label = "reset";
 197                         gpios = <&gpio 6 1>;
 198                         linux,code = <0x198>;
 199                 };
 200
 201                 wps {
 202                         label = "wps";
 203                         gpios = <&gpio 9 1>;
 204                         linux,code = <0x211>;
 205                 };
 206         };
 207
 208         gpio-leds {
 209                 compatible = "gpio-leds";
 210
 211                 dsl {
 212                         label = "dsl";
 213                         gpios = <&gpio 2 1>;
 214                 };
 215
 216                 internet_red {
 217                         label = "internet_red";
 218                         gpios = <&gpio 10 1>;
 219                 };
 220
 221                 info_red {
 222                         label = "info_red";
 223                         gpios = <&gpio 12 1>;
 224                 };
 225
 226                 power {
 227                         label = "power"; /* green */
 228                         gpios = <&gpio 14 1>;
 229                 };
 230
 231                 info_green {
 232                         label = "info_green";
 233                         gpios = <&gpio 15 1>;
 234                 };
 235
 236                 internet_green {
 237                         label = "internet_green";
 238                         gpios = <&gpio 19 1>;
 239                 };
 240
 241                 wifi {
 242                         label = "wifi";
 243                         gpios = <&gpio 20 1>;
 244                 };
 245
 246                 power2 {
 247                         label = "power2"; /* red */
 248                         gpios = <&gpio 28 1>;
 249                 };
 250
 251                 phone_red {
 252                         label = "phone_red";
 253                         gpios = <&gpio 29 1>;
 254                 };
 255         };
 256 };