target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x4000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 spi@E100800 {
  14                         compatible = "lantiq,spi-xway";
  15                         reg = <0xE100800 0x100>;
  16                         interrupt-parent = <&icu0>;
  17                         interrupts = <22 23 24>;
  18                         #address-cells = <1>;
  19                         m25p80@0 {
  20                                 #address-cells = <1>;
  21                                 #size-cells = <1>;
  22                                 compatible = "jedec,spi-nor";
  23                                 reg = <3>;
  24                                 spi-max-frequency = <20000000>;
  25
  26                                 partition@0 {
  27                                         reg = <0x0 0x20000>;
  28                                         label = "u-boot";
  29                                         read-only;
  30                                 };
  31
  32                                 partition@20000 {
  33                                         reg = <0x20000 0x7a0000>;
  34                                         label = "firmware";
  35                                 };
  36
  37                                 partition@7c0000 {
  38                                         reg = <0x7c0000 0x10000>;
  39                                         label = "config";
  40                                         read-only;
  41                                 };
  42
  43                                 ath9k_cal: partition@7d0000 {
  44                                         reg = <0x7d0000 0x30000>;
  45                                         label = "boardconfig";
  46                                         read-only;
  47                                 };
  48                         };
  49                 };
  50
  51                 gpio: pinmux@E100B10 {
  52                         pinctrl-names = "default";
  53                         pinctrl-0 = <&state_default>;
  54
  55                         state_default: pinmux {
  56                                 mdio {
  57                                         lantiq,groups = "mdio";
  58                                         lantiq,function = "mdio";
  59                                 };
  60                                 gphy-leds {
  61                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  62                                         lantiq,function = "gphy";
  63                                         lantiq,pull = <2>;
  64                                         lantiq,open-drain = <0>;
  65                                         lantiq,output = <1>;
  66                                 };
  67                                 phy-rst {
  68                                         lantiq,pins = "io42";
  69                                         lantiq,pull = <0>;
  70                                         lantiq,open-drain = <0>;
  71                                         lantiq,output = <1>;
  72                                 };
  73                                 spi {
  74                                         lantiq,groups = "spi", "spi_cs4";
  75                                         lantiq,function = "spi";
  76                                 };
  77                                 pcie-rst {
  78                                         lantiq,pins = "io38";
  79                                         lantiq,pull = <0>;
  80                                         lantiq,output = <1>;
  81                                 };
  82                         };
  83                 };
  84
  85                 eth@E108000 {
  86                         #address-cells = <1>;
  87                         #size-cells = <0>;
  88                         compatible = "lantiq,xrx200-net";
  89                         reg = < 0xE108000 0x3000 /* switch */
  90                                 0xE10B100 0x70 /* mdio */
  91                                 0xE10B1D8 0x30 /* mii */
  92                                 0xE10B308 0x30 /* pmac */
  93                         >;
  94                         interrupt-parent = <&icu0>;
  95                         interrupts = <73 72>;
  96
  97                         lan: interface@0 {
  98                                 compatible = "lantiq,xrx200-pdi";
  99                                 #address-cells = <1>;
 100                                 #size-cells = <0>;
 101                                 reg = <0>;
 102                                 mtd-mac-address = <&ath9k_cal 0xf100>;
 103                                 lantiq,switch;
 104
 105                                 ethernet@0 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <0>;
 108                                         phy-mode = "rgmii";
 109                                         phy-handle = <&phy0>;
 110                                         // gpios = <&gpio 42 1>;
 111                                 };
 112                                 ethernet@5 {
 113                                         compatible = "lantiq,xrx200-pdi-port";
 114                                         reg = <5>;
 115                                         phy-mode = "rgmii";
 116                                         phy-handle = <&phy5>;
 117                                 };
 118                                 ethernet@2 {
 119                                         compatible = "lantiq,xrx200-pdi-port";
 120                                         reg = <2>;
 121                                         phy-mode = "gmii";
 122                                         phy-handle = <&phy11>;
 123                                 };
 124                                 ethernet@3 {
 125                                         compatible = "lantiq,xrx200-pdi-port";
 126                                         reg = <4>;
 127                                         phy-mode = "gmii";
 128                                         phy-handle = <&phy13>;
 129                                 };
 130                         };
 131
 132                         mdio@0 {
 133                                 #address-cells = <1>;
 134                                 #size-cells = <0>;
 135                                 compatible = "lantiq,xrx200-mdio";
 136                                 phy0: ethernet-phy@0 {
 137                                         reg = <0x0>;
 138                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 139                                 };
 140                                 phy5: ethernet-phy@5 {
 141                                         reg = <0x5>;
 142                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 143                                 };
 144                                 phy11: ethernet-phy@11 {
 145                                         reg = <0x11>;
 146                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 147                                 };
 148                                 phy13: ethernet-phy@13 {
 149                                         reg = <0x13>;
 150                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 151                                 };
 152                         };
 153                 };
 154
 155                 ifxhcd@E101000 {
 156                         status = "okay";
 157                         gpios = <&gpio 33 0>;
 158                         lantiq,portmask = <0x3>;
 159                 };
 160
 161                 ifxhcd@E106000 {
 162                         status = "okay";
 163                         gpios = <&gpio 33 0>;
 164                 };
 165         };
 166
 167         gphy-xrx200 {
 168                 compatible = "lantiq,phy-xrx200";
 169                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 170                 phys = [ 00 01 ];
 171         };
 172
 173         pcie {
 174                 compatible = "lantiq,pcie-xway";
 175         };
 176
 177         ath9k_eep {
 178                 compatible = "ath9k,eeprom";
 179                 ath,eep-flash = <&ath9k_cal 0x21000>;
 180                 ath,mac-offset = <0xf100>;
 181                 ath,mac-increment;
 182                 ath,led-pin = <0>;
 183                 ath,disable-5ghz;
 184         };
 185
 186         gpio-keys-polled {
 187                 compatible = "gpio-keys-polled";
 188                 #address-cells = <1>;
 189                 #size-cells = <0>;
 190                 poll-interval = <100>;
 191                 reset {
 192                         label = "reset";
 193                         gpios = <&gpio 0 1>;
 194                         linux,code = <0x198>;
 195                 };
 196
 197                 wifi {
 198                         label = "wifi";
 199                         gpios = <&gpio 9 0>;
 200                         linux,code = <0xf7>;
 201                         linux,input-type = <5>; /* EV_SW */
 202                 };
 203
 204                 wps {
 205                         label = "wps";
 206                         gpios = <&gpio 39 1>;
 207                         linux,code = <0x211>;
 208                 };
 209         };
 210
 211         gpio-leds {
 212                 compatible = "gpio-leds";
 213
 214                 dsl {
 215                         label = "dsl";
 216                         gpios = <&gpio 4 0>;
 217                 };
 218                 internet {
 219                         label = "internet";
 220                         gpios = <&gpio 5 0>;
 221                 };
 222                 usb0 {
 223                         label = "usb";
 224                         gpios = <&gpio 19 0>;
 225                 };
 226                 usb2 {
 227                         label = "usb2";
 228                         gpios = <&gpio 20 0>;
 229                 };
 230                 wps {
 231                         label = "wps";
 232                         gpios = <&gpio 37 0>;
 233                 };
 234         };
 235 };