target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x4000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 spi@E100800 {
  14                         compatible = "lantiq,spi-xway";
  15                         reg = <0xE100800 0x100>;
  16                         interrupt-parent = <&icu0>;
  17                         interrupts = <22 23 24>;
  18                         #address-cells = <1>;
  19                         m25p80@0 {
  20                                 #address-cells = <1>;
  21                                 #size-cells = <1>;
  22                                 compatible = "jedec,spi-nor";
  23                                 reg = <3>;
  24                                 spi-max-frequency = <20000000>;
  25
  26                                 partition@0 {
  27                                         reg = <0x0 0x20000>;
  28                                         label = "u-boot";
  29                                         read-only;
  30                                 };
  31
  32                                 partition@20000 {
  33                                         reg = <0x20000 0x6a0000>;
  34                                         label = "firmware";
  35                                 };
  36
  37                                 partition@6c0000 {
  38                                         reg = <0x6c0000 0x100000>;
  39                                         label = "dsl_fw";
  40                                 };
  41
  42                                 partition@7c0000 {
  43                                         reg = <0x7c0000 0x10000>;
  44                                         label = "config";
  45                                         read-only;
  46                                 };
  47
  48                                 ath9k_cal: partition@7d0000 {
  49                                         reg = <0x7d0000 0x30000>;
  50                                         label = "boardconfig";
  51                                         read-only;
  52                                 };
  53                         };
  54                 };
  55
  56                 gpio: pinmux@E100B10 {
  57                         pinctrl-names = "default";
  58                         pinctrl-0 = <&state_default>;
  59
  60                         state_default: pinmux {
  61                                 mdio {
  62                                         lantiq,groups = "mdio";
  63                                         lantiq,function = "mdio";
  64                                 };
  65                                 gphy-leds {
  66                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  67                                         lantiq,function = "gphy";
  68                                         lantiq,pull = <2>;
  69                                         lantiq,open-drain = <0>;
  70                                         lantiq,output = <1>;
  71                                 };
  72                                 phy-rst {
  73                                         lantiq,pins = "io42";
  74                                         lantiq,pull = <0>;
  75                                         lantiq,open-drain = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 spi {
  79                                         lantiq,groups = "spi", "spi_cs4";
  80                                         lantiq,function = "spi";
  81                                 };
  82                                 pcie-rst {
  83                                         lantiq,pins = "io38";
  84                                         lantiq,pull = <0>;
  85                                         lantiq,output = <1>;
  86                                 };
  87                         };
  88                 };
  89
  90                 eth@E108000 {
  91                         #address-cells = <1>;
  92                         #size-cells = <0>;
  93                         compatible = "lantiq,xrx200-net";
  94                         reg = < 0xE108000 0x3000 /* switch */
  95                                 0xE10B100 0x70 /* mdio */
  96                                 0xE10B1D8 0x30 /* mii */
  97                                 0xE10B308 0x30 /* pmac */
  98                         >;
  99                         interrupt-parent = <&icu0>;
 100                         interrupts = <73 72>;
 101
 102                         lan: interface@0 {
 103                                 compatible = "lantiq,xrx200-pdi";
 104                                 #address-cells = <1>;
 105                                 #size-cells = <0>;
 106                                 reg = <0>;
 107                                 mtd-mac-address = <&ath9k_cal 0xf100>;
 108                                 lantiq,switch;
 109
 110                                 ethernet@0 {
 111                                         compatible = "lantiq,xrx200-pdi-port";
 112                                         reg = <0>;
 113                                         phy-mode = "rgmii";
 114                                         phy-handle = <&phy0>;
 115                                         // gpios = <&gpio 42 1>;
 116                                 };
 117                                 ethernet@5 {
 118                                         compatible = "lantiq,xrx200-pdi-port";
 119                                         reg = <5>;
 120                                         phy-mode = "rgmii";
 121                                         phy-handle = <&phy5>;
 122                                 };
 123                                 ethernet@2 {
 124                                         compatible = "lantiq,xrx200-pdi-port";
 125                                         reg = <2>;
 126                                         phy-mode = "gmii";
 127                                         phy-handle = <&phy11>;
 128                                 };
 129                                 ethernet@3 {
 130                                         compatible = "lantiq,xrx200-pdi-port";
 131                                         reg = <4>;
 132                                         phy-mode = "gmii";
 133                                         phy-handle = <&phy13>;
 134                                 };
 135                         };
 136
 137                         mdio@0 {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                                 compatible = "lantiq,xrx200-mdio";
 141                                 phy0: ethernet-phy@0 {
 142                                         reg = <0x0>;
 143                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 144                                 };
 145                                 phy5: ethernet-phy@5 {
 146                                         reg = <0x5>;
 147                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 148                                 };
 149                                 phy11: ethernet-phy@11 {
 150                                         reg = <0x11>;
 151                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 152                                 };
 153                                 phy13: ethernet-phy@13 {
 154                                         reg = <0x13>;
 155                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 156                                 };
 157                         };
 158                 };
 159
 160                 ifxhcd@E101000 {
 161                         status = "okay";
 162                         gpios = <&gpio 33 0>;
 163                         lantiq,portmask = <0x3>;
 164                 };
 165
 166                 ifxhcd@E106000 {
 167                         status = "okay";
 168                         gpios = <&gpio 33 0>;
 169                 };
 170         };
 171
 172         gphy-xrx200 {
 173                 compatible = "lantiq,phy-xrx200";
 174                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 175                 phys = [ 00 01 ];
 176         };
 177
 178         pcie {
 179                 compatible = "lantiq,pcie-xway";
 180         };
 181
 182         ath9k_eep {
 183                 compatible = "ath9k,eeprom";
 184                 ath,eep-flash = <&ath9k_cal 0x21000>;
 185                 ath,mac-offset = <0xf100>;
 186                 ath,mac-increment;
 187                 ath,led-pin = <0>;
 188         };
 189
 190         gpio-keys-polled {
 191                 compatible = "gpio-keys-polled";
 192                 #address-cells = <1>;
 193                 #size-cells = <0>;
 194                 poll-interval = <100>;
 195                 reset {
 196                         label = "reset";
 197                         gpios = <&gpio 0 1>;
 198                         linux,code = <0x198>;
 199                 };
 200
 201                 wifi {
 202                         label = "wifi";
 203                         gpios = <&gpio 9 0>;
 204                         linux,code = <0xf7>;
 205                         linux,input-type = <5>; /* EV_SW */
 206                 };
 207
 208                 wps {
 209                         label = "wps";
 210                         gpios = <&gpio 39 1>;
 211                         linux,code = <0x211>;
 212                 };
 213         };
 214
 215         gpio-leds {
 216                 compatible = "gpio-leds";
 217
 218                 dsl {
 219                         label = "dsl";
 220                         gpios = <&gpio 4 0>;
 221                 };
 222                 internet {
 223                         label = "internet";
 224                         gpios = <&gpio 5 0>;
 225                 };
 226                 usb0 {
 227                         label = "usb";
 228                         gpios = <&gpio 19 0>;
 229                 };
 230                 usb2 {
 231                         label = "usb2";
 232                         gpios = <&gpio 20 0>;
 233                 };
 234                 wps {
 235                         label = "wps";
 236                         gpios = <&gpio 37 0>;
 237                 };
 238         };
 239 };