target/linux/lantiq/dts/TDW89X0.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6         };
   7
   8         memory@0 {
   9                 reg = <0x0 0x4000000>;
  10         };
  11
  12         fpi@10000000 {
  13                 spi@E100800 {
  14                         compatible = "lantiq,spi-xway";
  15                         reg = <0xE100800 0x100>;
  16                         interrupt-parent = <&icu0>;
  17                         interrupts = <22 23 24>;
  18                         #address-cells = <1>;
  19                         #size-cells = <1>;
  20                         m25p80@0 {
  21                                 #address-cells = <1>;
  22                                 #size-cells = <1>;
  23                                 compatible = "jedec,spi-nor";
  24                                 reg = <3 0>;
  25                                 spi-max-frequency = <33250000>;
  26                                 m25p,fast-read;
  27
  28                                 partition@0 {
  29                                         reg = <0x0 0x20000>;
  30                                         label = "u-boot";
  31                                         read-only;
  32                                 };
  33
  34                                 partition@20000 {
  35                                         reg = <0x20000 0x7a0000>;
  36                                         label = "firmware";
  37                                 };
  38
  39                                 partition@7c0000 {
  40                                         reg = <0x7c0000 0x10000>;
  41                                         label = "config";
  42                                         read-only;
  43                                 };
  44
  45                                 ath9k_cal: partition@7d0000 {
  46                                         reg = <0x7d0000 0x30000>;
  47                                         label = "boardconfig";
  48                                         read-only;
  49                                 };
  50                         };
  51                 };
  52
  53                 gpio: pinmux@E100B10 {
  54                         pinctrl-names = "default";
  55                         pinctrl-0 = <&state_default>;
  56
  57                         state_default: pinmux {
  58                                 mdio {
  59                                         lantiq,groups = "mdio";
  60                                         lantiq,function = "mdio";
  61                                 };
  62                                 gphy-leds {
  63                                         lantiq,groups = "gphy0 led1", "gphy1 led1";
  64                                         lantiq,function = "gphy";
  65                                         lantiq,pull = <2>;
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,output = <1>;
  68                                 };
  69                                 phy-rst {
  70                                         lantiq,pins = "io42";
  71                                         lantiq,pull = <0>;
  72                                         lantiq,open-drain = <0>;
  73                                         lantiq,output = <1>;
  74                                 };
  75                                 spi {
  76                                         lantiq,groups = "spi", "spi_cs4";
  77                                         lantiq,function = "spi";
  78                                 };
  79                                 pcie-rst {
  80                                         lantiq,pins = "io38";
  81                                         lantiq,pull = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                         };
  85                 };
  86
  87                 eth@E108000 {
  88                         #address-cells = <1>;
  89                         #size-cells = <0>;
  90                         compatible = "lantiq,xrx200-net";
  91                         reg = < 0xE108000 0x3000 /* switch */
  92                                 0xE10B100 0x70 /* mdio */
  93                                 0xE10B1D8 0x30 /* mii */
  94                                 0xE10B308 0x30 /* pmac */
  95                         >;
  96                         interrupt-parent = <&icu0>;
  97                         interrupts = <73 72>;
  98
  99                         lan: interface@0 {
 100                                 compatible = "lantiq,xrx200-pdi";
 101                                 #address-cells = <1>;
 102                                 #size-cells = <0>;
 103                                 reg = <0>;
 104                                 mtd-mac-address = <&ath9k_cal 0xf100>;
 105                                 lantiq,switch;
 106
 107                                 ethernet@0 {
 108                                         compatible = "lantiq,xrx200-pdi-port";
 109                                         reg = <0>;
 110                                         phy-mode = "rgmii";
 111                                         phy-handle = <&phy0>;
 112                                         // gpios = <&gpio 42 1>;
 113                                 };
 114                                 ethernet@5 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <5>;
 117                                         phy-mode = "rgmii";
 118                                         phy-handle = <&phy5>;
 119                                 };
 120                                 ethernet@2 {
 121                                         compatible = "lantiq,xrx200-pdi-port";
 122                                         reg = <2>;
 123                                         phy-mode = "gmii";
 124                                         phy-handle = <&phy11>;
 125                                 };
 126                                 ethernet@3 {
 127                                         compatible = "lantiq,xrx200-pdi-port";
 128                                         reg = <4>;
 129                                         phy-mode = "gmii";
 130                                         phy-handle = <&phy13>;
 131                                 };
 132                         };
 133
 134                         mdio@0 {
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                                 compatible = "lantiq,xrx200-mdio";
 138                                 phy0: ethernet-phy@0 {
 139                                         reg = <0x0>;
 140                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 141                                 };
 142                                 phy5: ethernet-phy@5 {
 143                                         reg = <0x5>;
 144                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 145                                 };
 146                                 phy11: ethernet-phy@11 {
 147                                         reg = <0x11>;
 148                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 149                                 };
 150                                 phy13: ethernet-phy@13 {
 151                                         reg = <0x13>;
 152                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 153                                 };
 154                         };
 155                 };
 156
 157                 ifxhcd@E101000 {
 158                         status = "okay";
 159                         gpios = <&gpio 33 0>;
 160                         lantiq,portmask = <0x3>;
 161                 };
 162
 163                 ifxhcd@E106000 {
 164                         status = "okay";
 165                         gpios = <&gpio 33 0>;
 166                 };
 167         };
 168
 169         gphy-xrx200 {
 170                 compatible = "lantiq,phy-xrx200";
 171                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 172                 phys = [ 00 01 ];
 173         };
 174
 175         pcie {
 176                 compatible = "lantiq,pcie-xway";
 177         };
 178
 179         ath9k_eep {
 180                 compatible = "ath9k,eeprom";
 181                 ath,eep-flash = <&ath9k_cal 0x21000>;
 182                 ath,mac-offset = <0xf100>;
 183                 ath,mac-increment;
 184                 ath,led-pin = <0>;
 185                 ath,disable-5ghz;
 186                 ath,led-active-high;
 187         };
 188
 189         gpio-keys-polled {
 190                 compatible = "gpio-keys-polled";
 191                 #address-cells = <1>;
 192                 #size-cells = <0>;
 193                 poll-interval = <100>;
 194                 reset {
 195                         label = "reset";
 196                         gpios = <&gpio 0 1>;
 197                         linux,code = <0x198>;
 198                 };
 199
 200                 wifi {
 201                         label = "wifi";
 202                         gpios = <&gpio 9 0>;
 203                         linux,code = <0xf7>;
 204                         linux,input-type = <5>; /* EV_SW */
 205                 };
 206
 207                 wps {
 208                         label = "wps";
 209                         gpios = <&gpio 39 1>;
 210                         linux,code = <0x211>;
 211                 };
 212         };
 213
 214         gpio-leds {
 215                 compatible = "gpio-leds";
 216
 217                 dsl {
 218                         label = "dsl";
 219                         gpios = <&gpio 4 0>;
 220                 };
 221                 internet {
 222                         label = "internet";
 223                         gpios = <&gpio 5 0>;
 224                 };
 225                 usb0 {
 226                         label = "usb";
 227                         gpios = <&gpio 19 0>;
 228                 };
 229                 usb2 {
 230                         label = "usb2";
 231                         gpios = <&gpio 20 0>;
 232                 };
 233                 wps {
 234                         label = "wps";
 235                         gpios = <&gpio 37 0>;
 236                 };
 237         };
 238 };