target/linux/lantiq/dts/P2601HNFX.dts

   1 /dts-v1/;
   2
   3 /include/ "ar9.dtsi"
   4
   5 / {
   6         model = "P2601HNFX - ZyXEL P-2601HN-Fx";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x4000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19                 localbus@0 {
  20                         #address-cells = <2>;
  21                         #size-cells = <1>;
  22                         ranges = <0 0 0x0 0x3ffffff
  23                                   1 0 0x4000000 0x4000010>;
  24                         compatible = "lantiq,localbus", "simple-bus";
  25
  26                         nor-boot@0 {
  27                                 compatible = "lantiq,nor";
  28                                 bank-width = <2>;
  29                                 reg = <0 0x0 0x2000000>;
  30                                 #address-cells = <1>;
  31                                 #size-cells = <1>;
  32
  33                                 partition@0 {
  34                                         label = "uboot";
  35                                         reg = <0x00000 0x40000>;
  36                                         read-only;
  37                                 };
  38
  39                                 partition@40000 {
  40                                         label = "uboot_env";
  41                                         reg = <0x40000 0x20000>;
  42                                         read-only;
  43                                 };
  44
  45                                 partition@60000 {
  46                                         label = "firmware";
  47                                         reg = <0x60000 0xfa0000>;
  48                                 };
  49                         };
  50                 };
  51
  52                 gpio: pinmux@E100B10 {
  53                         compatible = "lantiq,pinctrl-xr9";
  54                         pinctrl-names = "default";
  55                         pinctrl-0 = <&state_default>;
  56
  57                         #gpio-cells = <2>;
  58                         gpio-controller;
  59                         reg = <0xE100B10 0xA0>;
  60
  61                         state_default: pinmux {
  62                                 stp {
  63                                         lantiq,groups = "stp";
  64                                         lantiq,function = "stp";
  65                                         lantiq,pull = <2>;
  66                                         lantiq,open-drain = <0>;
  67                                         lantiq,output = <1>;
  68                                 };
  69                                 exin {
  70                                         lantiq,groups = "exin1";
  71                                         lantiq,function = "exin";
  72                                 };
  73                                 pci {
  74                                         lantiq,groups = "gnt1";
  75                                         lantiq,function = "pci";
  76                                 };
  77                                 conf_out {
  78                                         lantiq,pins = "io4", "io5", "io6";
  79                                         lantiq,open-drain;
  80                                         lantiq,pull = <0>;
  81                                 };
  82                                 mdio {
  83                                         lantiq,groups = "mdio";
  84                                         lantiq,function = "mdio";
  85                                 };
  86                         };
  87                 };
  88
  89                 etop@E180000 {
  90                         phy-mode = "rmii";
  91                 };
  92
  93                 ifxhcd@E101000 {
  94                         status = "okay";
  95                         gpios = <&gpio 9 0>;
  96                 };
  97
  98                 stp: stp@E100BB0 {
  99                         #gpio-cells = <2>;
 100                         compatible = "lantiq,gpio-stp-xway";
 101                         gpio-controller;
 102                         reg = <0xE100BB0 0x40>;
 103
 104                         lantiq,shadow = <0xfff>;
 105                         lantiq,groups = <0x3>;
 106                 };
 107
 108                 pci@E105400 {
 109                         lantiq,bus-clock = <33333333>;
 110                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 111                         interrupt-map = <0x7000 0 0 1 &icu0 29 1>;
 112                         gpios-reset = <&gpio 21 0>;
 113                         req-mask = <0x1>;
 114                 };
 115         };
 116
 117         gpio-keys-polled {
 118                 compatible = "gpio-keys-polled";
 119                 #address-cells = <1>;
 120                 #size-cells = <0>;
 121                 poll-interval = <100>;
 122
 123                 reset {
 124                         label = "reset";
 125                         gpios = <&gpio 53 1>;
 126                         linux,code = <0x198>;
 127                 };
 128                 rfkill {
 129                         label = "rfkill";
 130                         gpios = <&gpio 54 1>;
 131                         linux,code = <0xf7>;
 132                 };
 133         };
 134
 135         gpio-leds {
 136                 compatible = "gpio-leds";
 137
 138                 power {
 139                         label = "power";
 140                         gpios = <&stp 11 1>;
 141                         default-state = "on";
 142                 };
 143                 power2 {
 144                         label = "power2";
 145                         gpios = <&gpio 29 1>;
 146                 };
 147                 online {
 148                         label = "online";
 149                         gpios = <&stp 13 1>;
 150                 };
 151                 online2 {
 152                         label = "online2";
 153                         gpios = <&stp 12 1>;
 154                 };
 155                 dsl {
 156                         label = "dsl";
 157                         gpios = <&stp 14 1>;
 158                 };
 159                 phone {
 160                         label = "phone";
 161                         gpios = <&stp 9 1>;
 162                 };
 163                 phone2 {
 164                         label = "phone2";
 165                         gpios = <&stp 8 1>;
 166                 };
 167                 wifi {
 168                         label = "wifi";
 169                         gpios = <&stp 15 1>;
 170                 };
 171                 wifi2 {
 172                         label = "wifi2";
 173                         gpios = <&stp 10 1>;
 174                 };
 175         };
 176
 177         gpio_export {
 178                 compatible = "gpio-export";
 179                 #size-cells = <0>;
 180
 181                 switch {
 182                         gpio-export,name = "switch";
 183                         gpio-export,output = <1>;
 184                         gpios = <&gpio 50 0>;
 185                 };
 186                 usb {
 187                         gpio-export,name = "wifi";
 188                         gpio-export,output = <1>;
 189                         gpios = <&gpio 9 0>;
 190                 };
 191         };
 192 };