target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         nand-parts@0 {
  19                                 compatible = "gen_nand", "lantiq,nand-xway";
  20                                 bank-width = <2>;
  21                                 reg = <1 0x0 0x2000000>;
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24
  25                                 partition@0 {
  26                                         label = "kernel";
  27                                         reg = <0x0 0x400000>;
  28                                 };
  29
  30                                 partition@400000 {
  31                                         label = "rootfs_ubi";
  32                                         reg = <0x400000 0x3000000>;
  33                                 };
  34
  35                                 partition@3400000 {
  36                                         label = "vr9_firmware";
  37                                         reg = <0x3400000 0x400000>;
  38                                 };
  39                                 partition@3800000 {
  40                                         label = "reserved";
  41                                         reg = <0x3800000 0x3000000>;
  42                                 };
  43                                 partition@6800000 {
  44                                         label = "config";
  45                                         reg = <0x6800000 0x200000>;
  46                                 };
  47                                 partition@6a00000 {
  48                                         label = "nand-filesystem";
  49                                         reg = <0x6a00000 0x1600000>;
  50                                 };
  51                         };
  52                 };
  53
  54                 gpio: pinmux@E100B10 {
  55                         pinctrl-names = "default";
  56                         pinctrl-0 = <&state_default>;
  57
  58                         state_default: pinmux {
  59                                 spi {
  60                                         lantiq,groups = "spi", "spi_cs4";
  61                                         lantiq,function = "gpio";
  62                                 };
  63                                 mdio {
  64                                         lantiq,groups = "mdio";
  65                                         lantiq,function = "mdio";
  66                                 };
  67                                 nand {
  68                                         lantiq,groups = "nand cle", "nand ale",
  69                                                         "nand rd", "nand cs1", "nand rdy";
  70                                         lantiq,function = "ebu";
  71                                         lantiq,pull = <1>;
  72                                 };
  73                                 phy-rst {
  74                                         lantiq,pins = "io37", "io44";
  75                                         lantiq,pull = <0>;
  76                                         lantiq,open-drain = <0>;
  77                                         lantiq,output = <1>;
  78                                 };
  79                                 pcie-rst {
  80                                         lantiq,pins = "io38";
  81                                         lantiq,pull = <0>;
  82                                         lantiq,output = <1>;
  83                                 };
  84                         };
  85                 };
  86
  87                 eth@E108000 {
  88                         #address-cells = <1>;
  89                         #size-cells = <0>;
  90                         compatible = "lantiq,xrx200-net";
  91                         reg = < 0xE108000 0x3000 /* switch */
  92                                 0xE10B100 0x70 /* mdio */
  93                                 0xE10B1D8 0x30 /* mii */
  94                                 0xE10B308 0x30 /* pmac */
  95                         >;
  96                         interrupt-parent = <&icu0>;
  97                         interrupts = <73 72>;
  98
  99                         lan: interface@0 {
 100                                 compatible = "lantiq,xrx200-pdi";
 101                                 #address-cells = <1>;
 102                                 #size-cells = <0>;
 103                                 reg = <0>;
 104                                 mac-address = [ 00 11 22 33 44 55 ];
 105                                 lantiq,switch;
 106
 107                                 ethernet@0 {
 108                                         compatible = "lantiq,xrx200-pdi-port";
 109                                         reg = <0>;
 110                                         phy-mode = "rgmii";
 111                                         phy-handle = <&phy0>;
 112                                         gpios = <&gpio 37 0>;
 113                                 };
 114                                 ethernet@1 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <1>;
 117                                         phy-mode = "rgmii";
 118                                         phy-handle = <&phy1>;
 119                                         gpios = <&gpio 44 0>;
 120                                 };
 121                                 ethernet@2 {
 122                                         compatible = "lantiq,xrx200-pdi-port";
 123                                         reg = <2>;
 124                                         phy-mode = "gmii";
 125                                         phy-handle = <&phy11>;
 126                                 };
 127                                 ethernet@3 {
 128                                         compatible = "lantiq,xrx200-pdi-port";
 129                                         reg = <4>;
 130                                         phy-mode = "gmii";
 131                                         phy-handle = <&phy13>;
 132                                 };
 133                         };
 134
 135                         mdio@0 {
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 compatible = "lantiq,xrx200-mdio";
 139                                 phy0: ethernet-phy@0 {
 140                                         reg = <0x0>;
 141                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 142                                 };
 143                                 phy1: ethernet-phy@1 {
 144                                         reg = <0x1>;
 145                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 146                                 };
 147                                 phy11: ethernet-phy@11 {
 148                                         reg = <0x11>;
 149                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 150                                 };
 151                                 phy13: ethernet-phy@13 {
 152                                         reg = <0x13>;
 153                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 154                                 };
 155                         };
 156                 };
 157
 158                 ifxhcd@E101000 {
 159                         status = "okay";
 160                         gpios = <&gpio 5 0
 161                                 &gpio 14 0>;
 162                         lantiq,portmask = <0x3>;
 163                 };
 164         };
 165
 166         spi {
 167                 #address-cells = <1>;
 168                 #size-cells = <1>;
 169
 170                 compatible = "spi-gpio";
 171
 172                 gpio-miso = <&gpio 16 0>;
 173                 gpio-mosi = <&gpio 17 0>;
 174                 gpio-sck = <&gpio 18 0>;
 175                 num-chipselects = <1>;
 176                 cs-gpios = <&gpio 10 1>;
 177
 178                 m25p80@0 {
 179                         #address-cells = <1>;
 180                         #size-cells = <1>;
 181                         compatible = "jedec,spi-nor";
 182                         reg = <0 0>;
 183                         spi-max-frequency = <1000000>;
 184
 185                         ath9k_cal: partition@0 {
 186                                 reg = <0x0 0x20000>;
 187                                 label = "urlader";
 188                                 read-only;
 189                         };
 190
 191                         partition@20000 {
 192                                 reg = <0x20000 0x10000>;
 193                                 label = "tffs (1)";
 194                                 read-only;
 195                         };
 196
 197                         partition@30000 {
 198                                 reg = <0x30000 0x10000>;
 199                                 label = "tffs (2)";
 200                                 read-only;
 201                         };
 202                 };
 203         };
 204
 205         ath9k_eep {
 206                 compatible = "ath9k,eeprom";
 207                 ath,eep-flash = <&ath9k_cal 0x985>;
 208                 ath,eep-endian;
 209                 ath,eep-swap;
 210         };
 211
 212         gphy-xrx200 {
 213                 compatible = "lantiq,phy-xrx200";
 214                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 215                 phys = [ 00 01 ];
 216         };
 217
 218         gpio-keys-polled {
 219                 compatible = "gpio-keys-polled";
 220                 #address-cells = <1>;
 221                 #size-cells = <0>;
 222                 poll-interval = <100>;
 223                 power {
 224                         label = "power";
 225                         gpios = <&gpio 1 0>;
 226                         linux,code = <0x100>;
 227                 };
 228 /*              wifi {
 229                         label = "wifi";
 230                         gpios = <&gpio 29 0>;
 231                         linux,code = <0x101>;
 232                 };*/
 233         };
 234
 235         gpio-leds {
 236                 compatible = "gpio-leds";
 237
 238                 power {
 239                         label = "power";
 240                         gpios = <&gpio 32 1>;
 241                 };
 242                 power2 {
 243                         label = "power2";
 244                         gpios = <&gpio 33 1>;
 245                 };
 246                 info_red {
 247                         label = "info_red";
 248                         gpios = <&gpio 34 1>;
 249                 };
 250                 wifi {
 251                         label = "wifi";
 252                         gpios = <&gpio 35 1>;
 253                 };
 254                 dsl {
 255                         label = "dsl";
 256                         gpios = <&gpio 36 1>;
 257                 };
 258                 lan {
 259                         label = "lan";
 260                         gpios = <&gpio 38 1>;
 261                 };
 262                 info_green {
 263                         label = "info_green";
 264                         gpios = <&gpio 47 1>;
 265                 };
 266         };
 267 };