target/linux/lantiq/dts/FRITZ3370.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "FRITZ3370 - Fritz!Box WLAN 3370";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
  10
  11                 leds {
  12                         boot = &power_green;
  13                         failsafe = &power_red;
  14                         running = &power_green;
  15
  16                         dsl = &dsl;
  17                         internet = &info_green;
  18                         wifi = &wifi;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x8000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nand-parts@0 {
  29                                 compatible = "gen_nand", "lantiq,nand-xway";
  30                                 bank-width = <2>;
  31                                 reg = <1 0x0 0x2000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partition@0 {
  36                                         label = "kernel";
  37                                         reg = <0x0 0x400000>;
  38                                 };
  39
  40                                 partition@400000 {
  41                                         label = "rootfs_ubi";
  42                                         reg = <0x400000 0x3000000>;
  43                                 };
  44
  45                                 partition@3400000 {
  46                                         label = "vr9_firmware";
  47                                         reg = <0x3400000 0x400000>;
  48                                 };
  49                                 partition@3800000 {
  50                                         label = "reserved";
  51                                         reg = <0x3800000 0x3000000>;
  52                                 };
  53                                 partition@6800000 {
  54                                         label = "config";
  55                                         reg = <0x6800000 0x200000>;
  56                                 };
  57                                 partition@6a00000 {
  58                                         label = "nand-filesystem";
  59                                         reg = <0x6a00000 0x1600000>;
  60                                 };
  61                         };
  62                 };
  63
  64                 gpio: pinmux@E100B10 {
  65                         pinctrl-names = "default";
  66                         pinctrl-0 = <&state_default>;
  67
  68                         state_default: pinmux {
  69                                 spi {
  70                                         lantiq,groups = "spi", "spi_cs4";
  71                                         lantiq,function = "gpio";
  72                                 };
  73                                 mdio {
  74                                         lantiq,groups = "mdio";
  75                                         lantiq,function = "mdio";
  76                                 };
  77                                 nand {
  78                                         lantiq,groups = "nand cle", "nand ale",
  79                                                         "nand rd", "nand cs1", "nand rdy";
  80                                         lantiq,function = "ebu";
  81                                         lantiq,pull = <1>;
  82                                 };
  83                                 phy-rst {
  84                                         lantiq,pins = "io37", "io44";
  85                                         lantiq,pull = <0>;
  86                                         lantiq,open-drain = <0>;
  87                                         lantiq,output = <1>;
  88                                 };
  89                                 pcie-rst {
  90                                         lantiq,pins = "io38";
  91                                         lantiq,pull = <0>;
  92                                         lantiq,output = <1>;
  93                                 };
  94                         };
  95                 };
  96
  97                 eth@E108000 {
  98                         #address-cells = <1>;
  99                         #size-cells = <0>;
 100                         compatible = "lantiq,xrx200-net";
 101                         reg = < 0xE108000 0x3000 /* switch */
 102                                 0xE10B100 0x70 /* mdio */
 103                                 0xE10B1D8 0x30 /* mii */
 104                                 0xE10B308 0x30 /* pmac */
 105                         >;
 106                         interrupt-parent = <&icu0>;
 107                         interrupts = <73 72>;
 108
 109                         lan: interface@0 {
 110                                 compatible = "lantiq,xrx200-pdi";
 111                                 #address-cells = <1>;
 112                                 #size-cells = <0>;
 113                                 reg = <0>;
 114                                 mac-address = [ 00 11 22 33 44 55 ];
 115                                 lantiq,switch;
 116
 117                                 ethernet@0 {
 118                                         compatible = "lantiq,xrx200-pdi-port";
 119                                         reg = <0>;
 120                                         phy-mode = "rgmii";
 121                                         phy-handle = <&phy0>;
 122                                         gpios = <&gpio 37 0>;
 123                                 };
 124                                 ethernet@1 {
 125                                         compatible = "lantiq,xrx200-pdi-port";
 126                                         reg = <1>;
 127                                         phy-mode = "rgmii";
 128                                         phy-handle = <&phy1>;
 129                                         gpios = <&gpio 44 0>;
 130                                 };
 131                                 ethernet@2 {
 132                                         compatible = "lantiq,xrx200-pdi-port";
 133                                         reg = <2>;
 134                                         phy-mode = "gmii";
 135                                         phy-handle = <&phy11>;
 136                                 };
 137                                 ethernet@3 {
 138                                         compatible = "lantiq,xrx200-pdi-port";
 139                                         reg = <4>;
 140                                         phy-mode = "gmii";
 141                                         phy-handle = <&phy13>;
 142                                 };
 143                         };
 144
 145                         mdio@0 {
 146                                 #address-cells = <1>;
 147                                 #size-cells = <0>;
 148                                 compatible = "lantiq,xrx200-mdio";
 149                                 phy0: ethernet-phy@0 {
 150                                         reg = <0x0>;
 151                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 152                                 };
 153                                 phy1: ethernet-phy@1 {
 154                                         reg = <0x1>;
 155                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 156                                 };
 157                                 phy11: ethernet-phy@11 {
 158                                         reg = <0x11>;
 159                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 160                                 };
 161                                 phy13: ethernet-phy@13 {
 162                                         reg = <0x13>;
 163                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 164                                 };
 165                         };
 166                 };
 167
 168                 ifxhcd@E101000 {
 169                         status = "okay";
 170                         gpios = <&gpio 5 0
 171                                 &gpio 14 0>;
 172                         lantiq,portmask = <0x3>;
 173                 };
 174         };
 175
 176         spi {
 177                 #address-cells = <1>;
 178                 #size-cells = <1>;
 179
 180                 compatible = "spi-gpio";
 181
 182                 gpio-miso = <&gpio 16 0>;
 183                 gpio-mosi = <&gpio 17 0>;
 184                 gpio-sck = <&gpio 18 0>;
 185                 num-chipselects = <1>;
 186                 cs-gpios = <&gpio 10 1>;
 187
 188                 m25p80@0 {
 189                         #address-cells = <1>;
 190                         #size-cells = <1>;
 191                         compatible = "jedec,spi-nor";
 192                         reg = <0 0>;
 193                         spi-max-frequency = <1000000>;
 194
 195                         ath9k_cal: partition@0 {
 196                                 reg = <0x0 0x20000>;
 197                                 label = "urlader";
 198                                 read-only;
 199                         };
 200
 201                         partition@20000 {
 202                                 reg = <0x20000 0x10000>;
 203                                 label = "tffs (1)";
 204                                 read-only;
 205                         };
 206
 207                         partition@30000 {
 208                                 reg = <0x30000 0x10000>;
 209                                 label = "tffs (2)";
 210                                 read-only;
 211                         };
 212                 };
 213         };
 214
 215         ath9k_eep {
 216                 compatible = "ath9k,eeprom";
 217                 ath,eep-flash = <&ath9k_cal 0x985>;
 218                 ath,eep-endian;
 219                 ath,eep-swap;
 220         };
 221
 222         gphy-xrx200 {
 223                 compatible = "lantiq,phy-xrx200";
 224                 firmware = "lantiq/vr9_phy11g_a1x.bin";
 225                 phys = [ 00 01 ];
 226         };
 227
 228         gpio-keys-polled {
 229                 compatible = "gpio-keys-polled";
 230                 #address-cells = <1>;
 231                 #size-cells = <0>;
 232                 poll-interval = <100>;
 233                 power {
 234                         label = "power";
 235                         gpios = <&gpio 1 0>;
 236                         linux,code = <0x100>;
 237                 };
 238 /*              wifi {
 239                         label = "wifi";
 240                         gpios = <&gpio 29 0>;
 241                         linux,code = <0x101>;
 242                 };*/
 243         };
 244
 245         gpio-leds {
 246                 compatible = "gpio-leds";
 247
 248                 power_green: power {
 249                         label = "fritz3370:green:power";
 250                         gpios = <&gpio 32 1>;
 251                         default-state = "keep";
 252                 };
 253                 power_red: power2 {
 254                         label = "fritz3370:red:power";
 255                         gpios = <&gpio 33 1>;
 256                 };
 257                 info_red {
 258                         label = "fritz3370:red:info";
 259                         gpios = <&gpio 34 1>;
 260                 };
 261                 wifi: wifi {
 262                         label = "fritz3370:green:wlan";
 263                         gpios = <&gpio 35 1>;
 264                 };
 265                 dsl: dsl {
 266                         label = "fritz3370:green:dsl";
 267                         gpios = <&gpio 36 1>;
 268                 };
 269                 lan {
 270                         label = "fritz3370:green:lan";
 271                         gpios = <&gpio 38 1>;
 272                 };
 273                 info_green: info_green {
 274                         label = "fritz3370:green:info";
 275                         gpios = <&gpio 47 1>;
 276                 };
 277         };
 278 };