target/linux/lantiq/dts/ARV7519RW22.dts

   1 /dts-v1/;
   2
   3 /include/ "vr9.dtsi"
   4
   5 / {
   6         model = "ARV7519RW22 - Astoria Networks ARV7519RW22-A-LT";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10         };
  11
  12         memory@0 {
  13                 reg = <0x0 0x8000000>;
  14         };
  15
  16         fpi@10000000 {
  17                 localbus@0 {
  18                         nor-boot@0 {
  19                                 compatible = "lantiq,nor";
  20                                 bank-width = <2>;
  21                                 reg = <0 0x0 0x2000000>;
  22                                 #address-cells = <1>;
  23                                 #size-cells = <1>;
  24
  25                                 partition@0 {
  26                                         label = "uboot";
  27                                         reg = <0x0 0x60000>;
  28                                         read-only;
  29                                 };
  30
  31                                 partition@60000 {
  32                                         label = "uboot-env";
  33                                         reg = <0x60000 0x20000>;
  34                                         read-only;
  35                                 };
  36
  37                                 partition@80000 {
  38                                         label = "firmware";
  39                                         reg = <0x80000 0x1f00000>;
  40                                 };
  41
  42                                 boardconfig: partition@1f80000 {
  43                                         label = "boardconfig";
  44                                         reg = <0x1f80000 0x80000>;
  45                                         read-only;
  46                                 };
  47                         };
  48                 };
  49
  50                 gpio: pinmux@E100B10 {
  51                         pinctrl-names = "default";
  52                         pinctrl-0 = <&state_default>;
  53
  54                         state_default: pinmux {
  55                                 mdio {
  56                                         lantiq,groups = "mdio";
  57                                         lantiq,function = "mdio";
  58                                 };
  59                                 pcie-rst {
  60                                         lantiq,pins = "io21";
  61                                         lantiq,pull = <0>;
  62                                         lantiq,output = <1>;
  63                                 };
  64                         };
  65                 };
  66
  67                 eth@E108000 {
  68                         #address-cells = <1>;
  69                         #size-cells = <0>;
  70                         compatible = "lantiq,xrx200-net";
  71                         reg = < 0xE108000 0x3000 /* switch */
  72                                 0xE10B100 0x70 /* mdio */
  73                                 0xE10B1D8 0x30 /* mii */
  74                                 0xE10B308 0x30 /* pmac */
  75                         >;
  76                         interrupt-parent = <&icu0>;
  77                         interrupts = <73 72>;
  78
  79                         lan: interface@0 {
  80                                 compatible = "lantiq,xrx200-pdi";
  81                                 #address-cells = <1>;
  82                                 #size-cells = <0>;
  83                                 reg = <0>;
  84                                 mtd-mac-address = <&boardconfig 0x16>;
  85                                 lantiq,switch;
  86
  87                                 ethernet@0 {
  88                                         compatible = "lantiq,xrx200-pdi-port";
  89                                         reg = <0>;
  90                                         phy-mode = "rgmii";
  91                                         phy-handle = <&phy0>;
  92                                 };
  93                                 ethernet@1 {
  94                                         compatible = "lantiq,xrx200-pdi-port";
  95                                         reg = <4>;
  96                                         phy-mode = "mii";
  97                                         phy-handle = <&phy13>;
  98                                 };
  99                                 ethernet@2 {
 100                                         compatible = "lantiq,xrx200-pdi-port";
 101                                         reg = <5>;
 102                                         phy-mode = "mii";
 103                                         phy-handle = <&phy14>;
 104                                 };
 105                                 ethernet@3 {
 106                                         compatible = "lantiq,xrx200-pdi-port";
 107                                         reg = <2>;
 108                                         phy-mode = "mii";
 109                                         phy-handle = <&phy11>;
 110                                 };
 111                                 ethernet@4 {
 112                                         compatible = "lantiq,xrx200-pdi-port";
 113                                         reg = <3>;
 114                                         phy-mode = "mii";
 115                                         phy-handle = <&phy12>;
 116                                 };
 117                         };
 118
 119                         mdio@0 {
 120                                 #address-cells = <1>;
 121                                 #size-cells = <0>;
 122                                 compatible = "lantiq,xrx200-mdio";
 123                                 phy0: ethernet-phy@0 {
 124                                         reg = <0x0>;
 125                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 126                                 };
 127                                 phy11: ethernet-phy@11 {
 128                                         reg = <0x11>;
 129                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 130                                 };
 131                                 phy12: ethernet-phy@12 {
 132                                         reg = <0x12>;
 133                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 134                                 };
 135                                 phy13: ethernet-phy@13 {
 136                                         reg = <0x13>;
 137                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 138                                 };
 139                                 phy14: ethernet-phy@14 {
 140                                         reg = <0x14>;
 141                                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 142                                 };
 143                         };
 144                 };
 145
 146                 ifxhcd@E101000 {
 147                         status = "okay";
 148                         gpios = <&gpio 32 0>;
 149                 };
 150
 151                 ifxhcd@E106000 {
 152                         status = "okay";
 153                         gpios = <&gpio 32 0>;
 154                 };
 155
 156                 pcie@d900000 {
 157                         status = "disabled";
 158                         compatible = "lantiq,pcie-xway";
 159                 };
 160
 161                 pci@E105400 {
 162                         status = "disabled";
 163                         compatible = "lantiq,pci-xway";
 164                 };
 165         };
 166
 167         gphy-xrx200 {
 168                 compatible = "lantiq,phy-xrx200";
 169                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
 170                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
 171                 phys = [ 00 01 ];
 172         };
 173
 174         gpio-keys-polled {
 175                 compatible = "gpio-keys-polled";
 176                 #address-cells = <1>;
 177                 #size-cells = <0>;
 178                 poll-interval = <100>;
 179
 180                 wps {
 181                         label = "wps";
 182                         gpios = <&gpio 20 1>;
 183                         linux,code = <0x211>;
 184                 };
 185                 reset {
 186                         label = "reset";
 187                         gpios = <&gpio 22 1>;
 188                         linux,code = <0x198>;
 189                 };
 190                 rfkill {
 191                         label = "rfkill";
 192                         gpios = <&gpio 45 1>;
 193                         linux,code = <0xf7>;
 194                 };
 195         };
 196
 197         gpio-leds {
 198                 compatible = "gpio-leds";
 199
 200                 lan_green {
 201                         label = "lan";
 202                         gpios = <&gpio 2 1>;
 203                 };
 204                 internet_red {
 205                         label = "internet_red";
 206                         gpios = <&gpio 10 1>;
 207                 };
 208                 power_green {
 209                         label = "power";
 210                         gpios = <&gpio 14 1>;
 211                         default-state = "on";
 212                 };
 213                 alarm_blue {
 214                         label = "alarm";
 215                         gpios = <&gpio 15 1>;
 216                 };
 217                 internet_orange {
 218                         label = "internet_orange";
 219                         gpios = <&gpio 19 1>;
 220                 };
 221                 internet_green {
 222                         label = "internet_green";
 223                         gpios = <&gpio 28 1>;
 224                 };
 225                 voice_green {
 226                         label = "voice";
 227                         gpios = <&gpio 29 1>;
 228                 };
 229         };
 230 };