target/linux/lantiq/dts/ARV7519PW.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7519PW - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         dsl = &dsl;
  13                         internet = &online;
  14                         power = &power;
  15                         power2 = &power2;
  16                         wifi = &wifi;
  17                 };
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         sram@1F000000 {
  25                 vmmc@107000 {
  26                         status = "okay";
  27                 };
  28         };
  29
  30         fpi@10000000 {
  31                 localbus@0 {
  32                         nor-boot@0 {
  33                                 compatible = "lantiq,nor";
  34                                 bank-width = <2>;
  35                                 reg = <0 0x0 0x2000000>;
  36                                 #address-cells = <1>;
  37                                 #size-cells = <1>;
  38
  39                                 partition@0 {
  40                                         label = "uboot";
  41                                         reg = <0x00000 0x40000>;
  42                                         read-only;
  43                                 };
  44
  45                                 partition@40000 {
  46                                         label = "uboot_env";
  47                                         reg = <0x40000 0x20000>;
  48                                 };
  49
  50                                 partition@60000 {
  51                                         label = "firmware";
  52                                         reg = <0x60000 0xf80000>;
  53                                 };
  54
  55                                 partition@fe0000 {
  56                                         label = "board_config";
  57                                         reg = <0xfe0000 0x20000>;
  58                                         read-only;
  59                                 };
  60                         };
  61
  62                         mac_addr {
  63                                 compatible = "lantiq,eth-mac";
  64                                 reg = <0 0xfe0016 0x6>;
  65                                 mac-increment = <2>;
  66                         };
  67                 };
  68
  69                 gpio: pinmux@E100B10 {
  70                         pinctrl-names = "default";
  71                         pinctrl-0 = <&state_default>;
  72
  73                         state_default: pinmux {
  74                                 ebu {
  75                                         lantiq,groups = "ebu cs1";
  76                                         lantiq,function = "ebu";
  77                                 };
  78                                 pci_in {
  79                                         lantiq,groups = "req1";
  80                                         lantiq,function = "pci";
  81                                         lantiq,open-drain = <1>;
  82                                         lantiq,pull = <2>;
  83                                         lantiq,output = <0>;
  84                                 };
  85                                 pci_out {
  86                                         lantiq,groups = "gnt1";
  87                                         lantiq,function = "pci";
  88                                         lantiq,pull = <0>;
  89                                         lantiq,output = <1>;
  90                                 };
  91                                 pci_rst {
  92                                         lantiq,pins = "io21";
  93                                         lantiq,pull = <2>;
  94                                         lantiq,output = <1>;
  95                                 };
  96                                 switch_rst {
  97                                         lantiq,pins = "io19";
  98                                         lantiq,pull = <2>;
  99                                         lantiq,output = <1>;
 100                                 };
 101                         };
 102                 };
 103
 104                 etop@E180000 {
 105                         phy-mode = "mii";
 106                 };
 107
 108                 /* warning: passive port
 109                 only works with active devices */
 110                 ifxhcd@E101000 {
 111                         status = "okay";
 112                 };
 113
 114                 pci@E105400 {
 115                         status = "okay";
 116                         lantiq,external-clock;
 117                         gpio-reset = <&gpio 21 0>;
 118                         req-mask = <0xf>;
 119                 };
 120         };
 121
 122         ralink_eep {
 123                 compatible = "ralink,eeprom";
 124                 ralink,eeprom = "RT2860.eeprom";
 125         };
 126
 127         gpio-keys-polled {
 128                 compatible = "gpio-keys-polled";
 129                 #address-cells = <1>;
 130                 #size-cells = <0>;
 131                 poll-interval = <100>;
 132
 133                 rfkill {
 134                         label = "rfkill";
 135                         gpios = <&gpio 11 1>;
 136                         linux,code = <0xf7>;
 137                 };
 138                 reset {
 139                         label = "reset";
 140                         gpios = <&gpio 28 1>;
 141                         linux,code = <0x198>;
 142                 };
 143         };
 144
 145         gpio-leds {
 146                 compatible = "gpio-leds";
 147                 power: power {
 148                         label = "power";
 149                         gpios = <&gpio 2 1>;
 150                         default-state = "off";
 151                 };
 152                 power2: power2 {
 153                         label = "power2";
 154                         gpios = <&gpio 14 1>;
 155                 };
 156                 online: online {
 157                         label = "online";
 158                         gpios = <&gpio 3 1>;
 159                 };
 160                 online2 {
 161                         label = "online2";
 162                         gpios = <&gpio 30 1>;
 163                 };
 164                 wifi: wifi {
 165                         label = "wifi";
 166                         gpios = <&gpio 12 1>;
 167                 };
 168                 wifi2 {
 169                         label = "wifi2";
 170                         gpios = <&gpio 10 1>;
 171                 };
 172                 wifi3 {
 173                         label = "wifi3";
 174                         gpios = <&gpio 6 1>;
 175                 };
 176                 voice {
 177                         label = "voice";
 178                         gpios = <&gpio 31 1>;
 179                 };
 180                 wps {
 181                         label = "wps";
 182                         gpios = <&gpio 15 1>;
 183                 };
 184                 wps2 {
 185                         label = "wps2";
 186                         gpios = <&gpio 7 1>;
 187                 };
 188                 wps3 {
 189                         label = "wps3";
 190                         gpios = <&gpio 23 1>;
 191                 };
 192                 dsl: dsl {
 193                         label = "dsl";
 194                         gpios = <&gpio 4 1>;
 195                 };
 196                 lan {
 197                         label = "lan";
 198                         gpios = <&gpio 1 1>;
 199                 };
 200                 tv {
 201                         label = "tv";
 202                         gpios = <&gpio 20 1>;
 203                 };
 204                 upgrade {
 205                         label = "upgrade";
 206                         gpios = <&gpio 29 1>;
 207                 };
 208         };
 209
 210         /* is there another way to "reserve" the GPIO? */
 211         gpio_export {
 212                 compatible = "gpio-export";
 213                 #size-cells = <0>;
 214
 215                 switch {
 216                         gpio-export,name = "switch";
 217                         gpio-export,output = <1>;
 218                         gpios = <&gpio 19 0>;
 219                 };
 220         };
 221 };