target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 /include/ "danube.dtsi"
   4
   5 / {
   6         model = "ARV7510PW22 - Astoria Networks";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power;
  14                         running = &power;
  15
  16                         internet = &internet;
  17                         wifi = &wlan;
  18                 };
  19         };
  20
  21         memory@0 {
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         sram@1F000000 {
  26                 vmmc@107000 {
  27                         status = "okay";
  28                         gpios = <&gpio 9 0>;
  29                 };
  30         };
  31
  32         fpi@10000000 {
  33                 localbus@0 {
  34                         nor-boot@0 {
  35                                 compatible = "lantiq,nor";
  36                                 bank-width = <2>;
  37                                 reg = <0 0x0 0x1000000>;
  38                                 #address-cells = <1>;
  39                                 #size-cells = <1>;
  40
  41                                 partitions {
  42                                         compatible = "fixed-partitions";
  43                                         #address-cells = <1>;
  44                                         #size-cells = <1>;
  45
  46                                         partition@0 {
  47                                                 label = "uboot";
  48                                                 reg = <0x00000 0x40000>;
  49                                                 read-only;
  50                                         };
  51
  52                                         partition@40000 {
  53                                                 label = "uboot_env";
  54                                                 reg = <0x40000 0x20000>;
  55                                                 read-only;
  56                                         };
  57
  58                                         partition@60000 {
  59                                                 label = "firmware";
  60                                                 reg = <0x60000 0xf80000>;
  61                                         };
  62
  63                                         partition@fe0000 {
  64                                                 label = "board_config";
  65                                                 reg = <0xfe0000 0x20000>;
  66                                                 read-only;
  67                                         };
  68                                 };
  69                         };
  70
  71                         mac_addr {
  72                                 compatible = "lantiq,eth-mac";
  73                                 reg = <0 0xfe0016 0x6>;
  74                                 mac-increment = <2>;
  75                         };
  76                 };
  77
  78                 gpio: pinmux@E100B10 {
  79                         pinctrl-names = "default";
  80                         pinctrl-0 = <&state_default>;
  81
  82                         state_default: pinmux {
  83                                 exin {
  84                                         lantiq,groups = "exin1";
  85                                         lantiq,function = "exin";
  86                                         lantiq,pull = <2>;
  87                                         lantiq,output = <0>;
  88                                 };
  89                                 pci_in {
  90                                         lantiq,groups = "req1", "req2";
  91                                         lantiq,function = "pci";
  92                                         lantiq,open-drain = <1>;
  93                                         lantiq,pull = <2>;
  94                                         lantiq,output = <0>;
  95                                 };
  96                                 pci_out {
  97                                         lantiq,groups = "gnt1";
  98                                         lantiq,function = "pci";
  99                                         lantiq,output = <1>;
 100                                 };
 101                                 pci_rst {
 102                                         lantiq,pins = "io21";
 103                                         lantiq,pull = <2>;
 104                                         lantiq,output = <1>;
 105                                 };
 106                                 pins_out {
 107                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
 108                                         lantiq,output = <1>;
 109                                 };
 110                                 pins_in {
 111                                         lantiq,pins = "io11", "io12", "io28";
 112                                         lantiq,open-drain = <1>;
 113                                         lantiq,pull = <2>;
 114                                         lantiq,output = <0>;
 115                                 };
 116                         };
 117                 };
 118
 119                 ifxhcd@E101000 {
 120                         status = "okay";
 121                         gpios = <&gpio 8 0>;
 122                 };
 123
 124                 etop@E180000 {
 125                         phy-mode = "mii";
 126                         /* Switch reset 19 */
 127                 };
 128
 129                 pci@E105400 {
 130                         status = "okay";
 131                         lantiq,external-clock;
 132                         interrupt-map = <
 133                                 0x7000 0 0 1 &icu0 30
 134                                 0x7800 0 0 1 &icu0 135
 135                                 0x7800 0 0 2 &icu0 135
 136                                 0x7800 0 0 3 &icu0 135
 137                         >;
 138                         gpio-reset = <&gpio 21 0>;
 139                         req-mask = <0x3>;
 140                 };
 141         };
 142
 143         ralink_eep {
 144                 compatible = "ralink,eeprom";
 145                 ralink,eeprom = "RT2860.eeprom";
 146         };
 147
 148         gpio-keys-polled {
 149                 compatible = "gpio-keys-polled";
 150                 #address-cells = <1>;
 151                 #size-cells = <0>;
 152                 poll-interval = <100>;
 153
 154                 rfkill {
 155                         label = "rfkill";
 156                         gpios = <&gpio 11 1>;
 157                         linux,code = <0xf7>;
 158                 };
 159                 restart {
 160                         label = "restart";
 161                         gpios = <&gpio 12 1>;
 162                         linux,code = <0x100>;
 163                 };
 164                 reset {
 165                         label = "reset";
 166                         gpios = <&gpio 28 1>;
 167                         linux,code = <0x198>;
 168                 };
 169         };
 170
 171         gpio-leds {
 172                 compatible = "gpio-leds";
 173                 power: power {
 174                         label = "power";
 175                         gpios = <&gpio 2 1>;
 176                         default-state = "keep";
 177                 };
 178                 internet: internet {
 179                         label = "internet";
 180                         gpios = <&gpio 4 1>;
 181                 };
 182                 wlan: wlan {
 183                         label = "wlan";
 184                         gpios = <&gpio 10 1>;
 185                 };
 186                 3g {
 187                         label = "3g";
 188                         gpios = <&gpio 15 1>;
 189                 };
 190                 message {
 191                         label = "message";
 192                         gpios = <&gpio 20 1>;
 193                 };
 194         };
 195 };