target/linux/lantiq/base-files/etc/uci-defaults/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2012 OpenWrt.org
   4 #
   5
   6 [ -e /etc/config/network ] && exit 0
   7
   8 set_atm_wan() {
   9         local vpi=$1
  10         local vci=$2
  11         local encaps=$3
  12         local payload=$4
  13         uci batch <<EOF
  14 set network.atm='atm-bridge'
  15 set network.atm.vpi='$vpi'
  16 set network.atm.vci='$vci'
  17 set network.atm.encaps='$encaps'
  18 set network.atm.payload='$payload'
  19 set network.wan='interface'
  20 set network.wan.ifname='nas0'
  21 set network.wan.proto='pppoe'
  22 set network.wan.username='foo'
  23 set network.wan.password='bar'
  24 set network.wan.ipv6='1'
  25 set network.wan6='interface'
  26 set network.wan6.ifname='@wan'
  27 set network.wan6.proto='dhcpv6'
  28 EOF
  29 }
  30
  31 . /lib/functions/uci-defaults.sh
  32 . /lib/functions/lantiq.sh
  33
  34 touch /etc/config/network
  35
  36 ucidef_set_interface_loopback
  37 ucidef_set_interface_lan 'eth0'
  38
  39 vpi=1
  40 vci=32
  41 encaps="llc"
  42 payload="bridged"
  43 lan_mac=""
  44 wan_mac=""
  45
  46 board=$(lantiq_board_id)
  47
  48 case "$board" in
  49 # adm6996
  50 ARV4510PW)
  51         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  52         wan_mac=$(macaddr_add "$lan_mac" 1)
  53         ucidef_set_interface_lan "eth0.1"
  54         ucidef_add_switch "switch0" "1" "1"
  55         ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
  56         ;;
  57
  58 ARV4520PW)
  59         ucidef_set_interface_lan "eth0.1"
  60         ucidef_add_switch "switch0" "1" "1"
  61         ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
  62         ;;
  63
  64 ACMP252|GIGASX76X)
  65         ucidef_set_interface_lan "eth0.1"
  66         ucidef_add_switch "switch0" "1" "1"
  67         ucidef_add_switch_vlan "switch0" "1" "4 3 2 1 5t"
  68         ;;
  69
  70 # ar8316
  71 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22)
  72         ucidef_set_interface_lan "eth0.1"
  73         ucidef_add_switch "switch0" "1" "1"
  74         ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
  75         ;;
  76
  77 WBMR)
  78         ucidef_set_interface_lan "eth0.1"
  79         ucidef_add_switch "switch0" "1" "1"
  80         ucidef_add_switch_vlan "switch0" "1" "0t 2 3 4 5"
  81         ;;
  82
  83 VG3503J)
  84         ucidef_set_interface_lan 'eth0'
  85         uci set network.lan.type='none'
  86         ;;
  87
  88 DGN3500*)
  89         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
  90         wan_mac=$(macaddr_add "$lan_mac" 1)
  91         ucidef_set_interface_lan "eth0.1"
  92         ucidef_add_switch "switch0" "1" "1"
  93         ucidef_add_switch_vlan "switch0" "1" "3 2 1 0 5t"
  94         ;;
  95
  96 GR7000)
  97         ucidef_set_interface_wan "eth0"
  98         uci set network.lan.ifname=''
  99         ;;
 100
 101 H201L)
 102         ucidef_set_interface_lan "eth0.1"
 103         ucidef_add_switch "switch0" "1" "1"
 104         ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4t"
 105         ;;
 106
 107 P2601HNFX)
 108         ucidef_set_interface_lan "eth0.1"
 109         ucidef_add_switch "switch0" "1" "1"
 110         ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
 111         ;;
 112
 113 TDW8970)
 114         lan_mac=$(mtd_get_mac_binary boardconfig 61696)
 115         wan_mac=$(macaddr_add "$lan_mac" 1)
 116         ;;
 117 esac
 118
 119 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
 120 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 121 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 122
 123 uci commit network
 124
 125 exit 0