target/linux/ixp4xx/patches-3.10/190-cambria_support.patch

   1 --- a/arch/arm/mach-ixp4xx/Kconfig
   2 +++ b/arch/arm/mach-ixp4xx/Kconfig
   3 @@ -25,6 +25,14 @@ config MACH_AVILA
   4           Avila Network Platform. For more information on this platform,
   5           see <file:Documentation/arm/IXP4xx>.
   6
   7 +config MACH_CAMBRIA
   8 +       bool "Cambria"
   9 +       select PCI
  10 +       help
  11 +         Say 'Y' here if you want your kernel to support the Gateworks
  12 +         Cambria series. For more information on this platform,
  13 +         see <file:Documentation/arm/IXP4xx>.
  14 +
  15  config MACH_LOFT
  16      bool "Loft"
  17      depends on MACH_AVILA
  18 @@ -222,7 +230,7 @@ config CPU_IXP46X
  19
  20  config CPU_IXP43X
  21         bool
  22 -       depends on MACH_KIXRP435
  23 +       depends on MACH_KIXRP435 || MACH_CAMBRIA
  24         default y
  25
  26  config MACH_GTWX5715
  27 --- a/arch/arm/mach-ixp4xx/Makefile
  28 +++ b/arch/arm/mach-ixp4xx/Makefile
  29 @@ -7,6 +7,7 @@ obj-pci-n       :=
  30
  31  obj-pci-$(CONFIG_ARCH_IXDP4XX)         += ixdp425-pci.o
  32  obj-pci-$(CONFIG_MACH_AVILA)           += avila-pci.o
  33 +obj-pci-$(CONFIG_MACH_CAMBRIA)         += cambria-pci.o
  34  obj-pci-$(CONFIG_MACH_IXDPG425)                += ixdpg425-pci.o
  35  obj-pci-$(CONFIG_ARCH_ADI_COYOTE)      += coyote-pci.o
  36  obj-pci-$(CONFIG_MACH_GTWX5715)                += gtwx5715-pci.o
  37 @@ -31,6 +32,7 @@ obj-y += common.o
  38
  39  obj-$(CONFIG_ARCH_IXDP4XX)     += ixdp425-setup.o
  40  obj-$(CONFIG_MACH_AVILA)       += avila-setup.o
  41 +obj-$(CONFIG_MACH_CAMBRIA)     += cambria-setup.o
  42  obj-$(CONFIG_MACH_IXDPG425)    += coyote-setup.o
  43  obj-$(CONFIG_ARCH_ADI_COYOTE)  += coyote-setup.o
  44  obj-$(CONFIG_MACH_GTWX5715)    += gtwx5715-setup.o
  45 --- /dev/null
  46 +++ b/arch/arm/mach-ixp4xx/cambria-pci.c
  47 @@ -0,0 +1,78 @@
  48 +/*
  49 + * arch/arch/mach-ixp4xx/cambria-pci.c
  50 + *
  51 + * PCI setup routines for Gateworks Cambria series
  52 + *
  53 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  54 + *
  55 + * based on coyote-pci.c:
  56 + *     Copyright (C) 2002 Jungo Software Technologies.
  57 + *     Copyright (C) 2003 MontaVista Softwrae, Inc.
  58 + *
  59 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
  60 + *
  61 + * This program is free software; you can redistribute it and/or modify
  62 + * it under the terms of the GNU General Public License version 2 as
  63 + * published by the Free Software Foundation.
  64 + *
  65 + */
  66 +
  67 +#include <linux/kernel.h>
  68 +#include <linux/pci.h>
  69 +#include <linux/init.h>
  70 +#include <linux/irq.h>
  71 +
  72 +#include <asm/mach-types.h>
  73 +#include <mach/hardware.h>
  74 +#include <asm/irq.h>
  75 +
  76 +#include <asm/mach/pci.h>
  77 +
  78 +extern void ixp4xx_pci_preinit(void);
  79 +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
  80 +extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
  81 +
  82 +void __init cambria_pci_preinit(void)
  83 +{
  84 +       irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
  85 +       irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
  86 +       irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
  87 +       irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
  88 +
  89 +       ixp4xx_pci_preinit();
  90 +}
  91 +
  92 +static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  93 +{
  94 +       if (slot == 1)
  95 +               return IRQ_IXP4XX_GPIO11;
  96 +       else if (slot == 2)
  97 +               return IRQ_IXP4XX_GPIO10;
  98 +       else if (slot == 3)
  99 +               return IRQ_IXP4XX_GPIO9;
 100 +       else if (slot == 4)
 101 +               return IRQ_IXP4XX_GPIO8;
 102 +       else if (slot == 6)
 103 +               return IRQ_IXP4XX_GPIO10;
 104 +       else if (slot == 15)
 105 +               return IRQ_IXP4XX_GPIO8;
 106 +
 107 +       else return -1;
 108 +}
 109 +
 110 +struct hw_pci cambria_pci __initdata = {
 111 +       .nr_controllers = 1,
 112 +       .preinit =        cambria_pci_preinit,
 113 +       .ops =            &ixp4xx_ops,
 114 +       .setup =          ixp4xx_setup,
 115 +       .map_irq =        cambria_map_irq,
 116 +};
 117 +
 118 +int __init cambria_pci_init(void)
 119 +{
 120 +       if (machine_is_cambria())
 121 +               pci_common_init(&cambria_pci);
 122 +       return 0;
 123 +}
 124 +
 125 +subsys_initcall(cambria_pci_init);
 126 --- /dev/null
 127 +++ b/arch/arm/mach-ixp4xx/cambria-setup.c
 128 @@ -0,0 +1,1003 @@
 129 +/*
 130 + * arch/arm/mach-ixp4xx/cambria-setup.c
 131 + *
 132 + * Board setup for the Gateworks Cambria series
 133 + *
 134 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 135 + * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
 136 + *
 137 + * based on coyote-setup.c:
 138 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 139 + *
 140 + * Author: Imre Kaloz <kaloz@openwrt.org>
 141 + *         Tim Harvey <tharvey@gateworks.com>
 142 + */
 143 +
 144 +#include <linux/device.h>
 145 +#include <linux/gpio_keys.h>
 146 +#include <linux/gpio.h>
 147 +#include <linux/i2c.h>
 148 +#include <linux/i2c-gpio.h>
 149 +#include <linux/i2c/at24.h>
 150 +#include <linux/i2c/gw_i2c_pld.h>
 151 +#include <linux/i2c/pca953x.h>
 152 +#include <linux/if_ether.h>
 153 +#include <linux/init.h>
 154 +#include <linux/input.h>
 155 +#include <linux/kernel.h>
 156 +#include <linux/leds.h>
 157 +#include <linux/memory.h>
 158 +#include <linux/netdevice.h>
 159 +#include <linux/serial.h>
 160 +#include <linux/serial_8250.h>
 161 +#include <linux/slab.h>
 162 +#include <linux/socket.h>
 163 +#include <linux/types.h>
 164 +#include <linux/tty.h>
 165 +#include <linux/irq.h>
 166 +#include <linux/usb/ehci_pdriver.h>
 167 +
 168 +#include <mach/hardware.h>
 169 +#include <asm/irq.h>
 170 +#include <asm/mach-types.h>
 171 +#include <asm/mach/arch.h>
 172 +#include <asm/mach/flash.h>
 173 +#include <asm/setup.h>
 174 +
 175 +#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
 176 +
 177 +struct cambria_board_info {
 178 +       unsigned char   *model;
 179 +       void            (*setup)(void);
 180 +};
 181 +
 182 +static struct cambria_board_info *cambria_info __initdata;
 183 +
 184 +static struct flash_platform_data cambria_flash_data = {
 185 +       .map_name       = "cfi_probe",
 186 +       .width          = 2,
 187 +};
 188 +
 189 +static struct resource cambria_flash_resource = {
 190 +       .flags          = IORESOURCE_MEM,
 191 +};
 192 +
 193 +static struct platform_device cambria_flash = {
 194 +       .name           = "IXP4XX-Flash",
 195 +       .id             = 0,
 196 +       .dev            = {
 197 +               .platform_data = &cambria_flash_data,
 198 +       },
 199 +       .num_resources  = 1,
 200 +       .resource       = &cambria_flash_resource,
 201 +};
 202 +
 203 +static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
 204 +       .sda_pin        = 7,
 205 +       .scl_pin        = 6,
 206 +};
 207 +
 208 +static struct platform_device cambria_i2c_gpio = {
 209 +       .name           = "i2c-gpio",
 210 +       .id             = 0,
 211 +       .dev = {
 212 +               .platform_data  = &cambria_i2c_gpio_data,
 213 +       },
 214 +};
 215 +
 216 +#ifdef SFP_SERIALID
 217 +static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
 218 +       .sda_pin        = 113,
 219 +       .scl_pin        = 112,
 220 +       .sda_is_open_drain = 0,
 221 +       .scl_is_open_drain = 0,
 222 +};
 223 +
 224 +static struct platform_device cambria_i2c_gpio_sfpa = {
 225 +       .name           = "i2c-gpio",
 226 +       .id             = 1,
 227 +       .dev = {
 228 +               .platform_data  = &cambria_i2c_gpio_sfpa_data,
 229 +       },
 230 +};
 231 +
 232 +static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
 233 +       .sda_pin        = 115,
 234 +       .scl_pin        = 114,
 235 +       .sda_is_open_drain = 0,
 236 +       .scl_is_open_drain = 0,
 237 +};
 238 +
 239 +static struct platform_device cambria_i2c_gpio_sfpb = {
 240 +       .name           = "i2c-gpio",
 241 +       .id             = 2,
 242 +       .dev = {
 243 +               .platform_data  = &cambria_i2c_gpio_sfpb_data,
 244 +       },
 245 +};
 246 +#endif // #ifdef SFP_SERIALID
 247 +
 248 +static struct eth_plat_info cambria_npec_data = {
 249 +       .phy            = 1,
 250 +       .rxq            = 4,
 251 +       .txreadyq       = 21,
 252 +};
 253 +
 254 +static struct eth_plat_info cambria_npea_data = {
 255 +       .phy            = 2,
 256 +       .rxq            = 2,
 257 +       .txreadyq       = 19,
 258 +};
 259 +
 260 +static struct platform_device cambria_npec_device = {
 261 +       .name                   = "ixp4xx_eth",
 262 +       .id                     = IXP4XX_ETH_NPEC,
 263 +       .dev.platform_data      = &cambria_npec_data,
 264 +       .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 265 +};
 266 +
 267 +static struct platform_device cambria_npea_device = {
 268 +       .name                   = "ixp4xx_eth",
 269 +       .id                     = IXP4XX_ETH_NPEA,
 270 +       .dev.platform_data      = &cambria_npea_data,
 271 +       .dev.coherent_dma_mask  = DMA_BIT_MASK(32),
 272 +};
 273 +
 274 +static struct resource cambria_uart_resource = {
 275 +       .start  = IXP4XX_UART1_BASE_PHYS,
 276 +       .end    = IXP4XX_UART1_BASE_PHYS + 0x0fff,
 277 +       .flags  = IORESOURCE_MEM,
 278 +};
 279 +
 280 +static struct plat_serial8250_port cambria_uart_data[] = {
 281 +       {
 282 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 283 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 284 +               .irq            = IRQ_IXP4XX_UART1,
 285 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 286 +               .iotype         = UPIO_MEM,
 287 +               .regshift       = 2,
 288 +               .uartclk        = IXP4XX_UART_XTAL,
 289 +       },
 290 +       { },
 291 +};
 292 +
 293 +static struct platform_device cambria_uart = {
 294 +       .name           = "serial8250",
 295 +       .id             = PLAT8250_DEV_PLATFORM,
 296 +       .dev = {
 297 +               .platform_data  = cambria_uart_data,
 298 +       },
 299 +       .num_resources  = 1,
 300 +       .resource       = &cambria_uart_resource,
 301 +};
 302 +
 303 +static struct resource cambria_optional_uart_resources[] = {
 304 +       {
 305 +               .start  = 0x52000000,
 306 +               .end    = 0x52000fff,
 307 +               .flags  = IORESOURCE_MEM
 308 +       },
 309 +       {
 310 +               .start  = 0x53000000,
 311 +               .end    = 0x53000fff,
 312 +               .flags  = IORESOURCE_MEM
 313 +       },
 314 +       {
 315 +               .start  = 0x52000000,
 316 +               .end    = 0x52000fff,
 317 +               .flags  = IORESOURCE_MEM
 318 +       },
 319 +       {
 320 +               .start  = 0x52000000,
 321 +               .end    = 0x52000fff,
 322 +               .flags  = IORESOURCE_MEM
 323 +       },
 324 +       {
 325 +               .start  = 0x52000000,
 326 +               .end    = 0x52000fff,
 327 +               .flags  = IORESOURCE_MEM
 328 +       },
 329 +       {
 330 +               .start  = 0x52000000,
 331 +               .end    = 0x52000fff,
 332 +               .flags  = IORESOURCE_MEM
 333 +       },
 334 +       {
 335 +               .start  = 0x52000000,
 336 +               .end    = 0x52000fff,
 337 +               .flags  = IORESOURCE_MEM
 338 +       },
 339 +       {
 340 +               .start  = 0x53000000,
 341 +               .end    = 0x53000fff,
 342 +               .flags  = IORESOURCE_MEM
 343 +       }
 344 +};
 345 +
 346 +static struct plat_serial8250_port cambria_optional_uart_data[] = {
 347 +       {
 348 +               .flags          = UPF_BOOT_AUTOCONF,
 349 +               .iotype         = UPIO_MEM_DELAY,
 350 +               .regshift       = 0,
 351 +               .uartclk        = 1843200,
 352 +               .rw_delay       = 10,
 353 +       },
 354 +       {
 355 +               .flags          = UPF_BOOT_AUTOCONF,
 356 +               .iotype         = UPIO_MEM_DELAY,
 357 +               .regshift       = 0,
 358 +               .uartclk        = 1843200,
 359 +               .rw_delay       = 10,
 360 +       },
 361 +       {
 362 +               .flags          = UPF_BOOT_AUTOCONF,
 363 +               .iotype         = UPIO_MEM,
 364 +               .regshift       = 0,
 365 +               .uartclk        = 18432000,
 366 +       },
 367 +       {
 368 +               .flags          = UPF_BOOT_AUTOCONF,
 369 +               .iotype         = UPIO_MEM,
 370 +               .regshift       = 0,
 371 +               .uartclk        = 18432000,
 372 +       },
 373 +       {
 374 +               .flags          = UPF_BOOT_AUTOCONF,
 375 +               .iotype         = UPIO_MEM,
 376 +               .regshift       = 0,
 377 +               .uartclk        = 18432000,
 378 +       },
 379 +       {
 380 +               .flags          = UPF_BOOT_AUTOCONF,
 381 +               .iotype         = UPIO_MEM,
 382 +               .regshift       = 0,
 383 +               .uartclk        = 18432000,
 384 +       },
 385 +       {
 386 +               .flags          = UPF_BOOT_AUTOCONF,
 387 +               .iotype         = UPIO_MEM,
 388 +               .regshift       = 0,
 389 +               .uartclk        = 18432000,
 390 +       },
 391 +  { },
 392 +};
 393 +
 394 +static struct platform_device cambria_optional_uart = {
 395 +       .name           = "serial8250",
 396 +       .id             = PLAT8250_DEV_PLATFORM1,
 397 +       .dev.platform_data      = cambria_optional_uart_data,
 398 +       .num_resources  = 2,
 399 +       .resource       = cambria_optional_uart_resources,
 400 +};
 401 +
 402 +static struct resource cambria_pata_resources[] = {
 403 +       {
 404 +               .flags  = IORESOURCE_MEM
 405 +       },
 406 +       {
 407 +               .flags  = IORESOURCE_MEM,
 408 +       },
 409 +       {
 410 +               .name   = "intrq",
 411 +               .start  = IRQ_IXP4XX_GPIO12,
 412 +               .end    = IRQ_IXP4XX_GPIO12,
 413 +               .flags  = IORESOURCE_IRQ,
 414 +       },
 415 +};
 416 +
 417 +static struct ixp4xx_pata_data cambria_pata_data = {
 418 +       .cs0_bits       = 0xbfff3c03,
 419 +       .cs1_bits       = 0xbfff3c03,
 420 +};
 421 +
 422 +static struct platform_device cambria_pata = {
 423 +       .name                   = "pata_ixp4xx_cf",
 424 +       .id                     = 0,
 425 +       .dev.platform_data      = &cambria_pata_data,
 426 +       .num_resources          = ARRAY_SIZE(cambria_pata_resources),
 427 +       .resource               = cambria_pata_resources,
 428 +};
 429 +
 430 +static struct gpio_led cambria_gpio_leds[] = {
 431 +       {
 432 +               .name           = "user",
 433 +               .gpio           = 5,
 434 +               .active_low     = 1,
 435 +       },
 436 +       {
 437 +               .name           = "user2",
 438 +               .gpio           = 0,
 439 +               .active_low     = 1,
 440 +       },
 441 +       {
 442 +               .name           = "user3",
 443 +               .gpio           = 0,
 444 +               .active_low     = 1,
 445 +       },
 446 +       {
 447 +               .name           = "user4",
 448 +               .gpio           = 0,
 449 +               .active_low     = 1,
 450 +       }
 451 +};
 452 +
 453 +static struct gpio_led_platform_data cambria_gpio_leds_data = {
 454 +       .num_leds       = 1,
 455 +       .leds           = cambria_gpio_leds,
 456 +};
 457 +
 458 +static struct platform_device cambria_gpio_leds_device = {
 459 +       .name           = "leds-gpio",
 460 +       .id             = -1,
 461 +       .dev.platform_data = &cambria_gpio_leds_data,
 462 +};
 463 +
 464 +static struct resource cambria_gpio_resources[] = {
 465 +       {
 466 +               .name = "gpio",
 467 +               .flags  = 0,
 468 +       },
 469 +};
 470 +
 471 +static struct gpio cambria_gpios_gw2350[] = {
 472 +       // ARM GPIO
 473 +#if 0 // configured from bootloader
 474 +       {  0, GPIOF_IN,            "ARM_DIO0" },
 475 +       {  1, GPIOF_IN,            "ARM_DIO1" },
 476 +       {  2, GPIOF_IN,            "ARM_DIO2" },
 477 +       {  3, GPIOF_IN,            "ARM_DIO3" },
 478 +       {  4, GPIOF_IN,            "ARM_DIO4" },
 479 +       {  5, GPIOF_IN,            "ARM_DIO5" },
 480 +       { 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
 481 +#endif
 482 +       {  8, GPIOF_IN,            "ARM_DIO8" },
 483 +       {  9, GPIOF_IN,            "ARM_DIO9" },
 484 +};
 485 +
 486 +static struct gpio cambria_gpios_gw2358[] = {
 487 +       // ARM GPIO
 488 +#if 0 // configured from bootloader
 489 +       {  0, GPIOF_IN,            "*VINLOW#" },
 490 +       {  2, GPIOF_IN,            "*GPS_PPS" },
 491 +       {  3, GPIOF_IN,            "*GPS_IRQ#" },
 492 +       {  4, GPIOF_IN,            "*RS485_IRQ#" },
 493 +       {  5, GPIOF_IN,            "*SER_EN#" },
 494 +       { 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
 495 +#endif
 496 +};
 497 +
 498 +static struct gpio cambria_gpios_gw2359[] = {
 499 +       // ARM GPIO
 500 +#if 0 // configured from bootloader
 501 +       {  0, GPIOF_IN,            "*PCA_IRQ#" },
 502 +       {  1, GPIOF_IN,            "ARM_DIO1" },
 503 +       {  2, GPIOF_IN,            "ARM_DIO2" },
 504 +       {  3, GPIOF_IN,            "ARM_DIO3" },
 505 +       {  4, GPIOF_IN,            "ARM_DIO4" },
 506 +       {  5, GPIOF_IN,            "ARM_DIO5" },
 507 +       {  8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
 508 +#endif
 509 +       { 11, GPIOF_OUT_INIT_HIGH, "*SER_EN"   },       // console serial enable
 510 +       { 12, GPIOF_IN,            "*GSC_IRQ#" },
 511 +       { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
 512 +       // GSC GPIO
 513 +#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
 514 +       {100, GPIOF_IN,            "*USER_PB#" },
 515 +#endif
 516 +       {103, GPIOF_OUT_INIT_HIGH, "*5V_EN" },         // 5V aux supply enable
 517 +       {108, GPIOF_IN,            "*SMUXDA0" },
 518 +       {109, GPIOF_IN,            "*SMUXDA1" },
 519 +       {110, GPIOF_IN,            "*SMUXDA2" },
 520 +       {111, GPIOF_IN,            "*SMUXDB0" },
 521 +       {112, GPIOF_IN,            "*SMUXDB1" },
 522 +       {113, GPIOF_IN,            "*SMUXDB2" },
 523 +       // PCA GPIO
 524 +       {118, GPIOF_IN,            "*USIM2_DET#"},     // USIM2 Detect
 525 +       {120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCI, 0=FP)
 526 +       {121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCI, 0=FP)
 527 +       {122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
 528 +       {123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" },     // J21/J10
 529 +       {124, GPIOF_IN,            "*COM1_DSR#" },     // J21/J10
 530 +       {127, GPIOF_IN,            "PCA_DIO0" },
 531 +       {128, GPIOF_IN,            "PCA_DIO1" },
 532 +       {129, GPIOF_IN,            "PCA_DIO2" },
 533 +       {130, GPIOF_IN,            "PCA_DIO3" },
 534 +       {131, GPIOF_IN,            "PCA_DIO4" },
 535 +};
 536 +
 537 +static struct gpio cambria_gpios_gw2360[] = {
 538 +       // ARM GPIO
 539 +       {  0, GPIOF_IN,            "*PCA_IRQ#" },
 540 +       { 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
 541 +       { 12, GPIOF_IN,            "*GSC_IRQ#" },
 542 +       { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
 543 +       // GSC GPIO
 544 +#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
 545 +       {100, GPIOF_IN,            "*USER_PB#" },
 546 +#endif
 547 +       {108, GPIOF_OUT_INIT_LOW,  "*ENET1_EN#" },     // ENET1 TX Enable
 548 +       {109, GPIOF_IN,            "*ENET1_PRES#" },   // ENET1 Detect (0=SFP present)
 549 +       {110, GPIOF_OUT_INIT_LOW,  "*ENET2_EN#" },     // ENET2 TX Enable
 550 +       {111, GPIOF_IN,            "*ENET2_PRES#"},    // ENET2 Detect (0=SFP present)
 551 +       // PCA GPIO
 552 +       {116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"},      // USIM2 Select (1=Loc, 0=Rem)
 553 +       {117, GPIOF_IN,            "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
 554 +       {118, GPIOF_IN,            "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
 555 +       {120, GPIOF_OUT_INIT_LOW,  "*USB1_PCI_SEL"},   // USB1  Select (1=PCIe1, 0=J1)
 556 +       {121, GPIOF_OUT_INIT_LOW,  "*USB2_PCI_SEL"},   // USB2  Select (1=PCIe2, 0=J1)
 557 +       {122, GPIOF_IN,            "*USIM1_DET#"},     // USIM1 Detect
 558 +       {127, GPIOF_IN,            "DIO0" },
 559 +       {128, GPIOF_IN,            "DIO1" },
 560 +       {129, GPIOF_IN,            "DIO2" },
 561 +       {130, GPIOF_IN,            "DIO3" },
 562 +       {131, GPIOF_IN,            "DIO4" },
 563 +};
 564 +
 565 +static struct latch_led cambria_latch_leds[] = {
 566 +       {
 567 +               .name   = "ledA",  /* green led */
 568 +               .bit    = 0,
 569 +       },
 570 +       {
 571 +               .name   = "ledB",  /* green led */
 572 +               .bit    = 1,
 573 +       },
 574 +       {
 575 +               .name   = "ledC",  /* green led */
 576 +               .bit    = 2,
 577 +       },
 578 +       {
 579 +               .name   = "ledD",  /* green led */
 580 +               .bit    = 3,
 581 +       },
 582 +       {
 583 +               .name   = "ledE",  /* green led */
 584 +               .bit    = 4,
 585 +       },
 586 +       {
 587 +               .name   = "ledF",  /* green led */
 588 +               .bit    = 5,
 589 +       },
 590 +       {
 591 +               .name   = "ledG",  /* green led */
 592 +               .bit    = 6,
 593 +       },
 594 +       {
 595 +               .name   = "ledH",  /* green led */
 596 +               .bit    = 7,
 597 +       }
 598 +};
 599 +
 600 +static struct latch_led_platform_data cambria_latch_leds_data = {
 601 +       .num_leds       = 8,
 602 +       .leds           = cambria_latch_leds,
 603 +       .mem            = 0x53F40000,
 604 +};
 605 +
 606 +static struct platform_device cambria_latch_leds_device = {
 607 +       .name           = "leds-latch",
 608 +       .id             = -1,
 609 +       .dev.platform_data = &cambria_latch_leds_data,
 610 +};
 611 +
 612 +static struct resource cambria_usb0_resources[] = {
 613 +       {
 614 +               .start  = 0xCD000000,
 615 +               .end    = 0xCD000300,
 616 +               .flags  = IORESOURCE_MEM,
 617 +       },
 618 +       {
 619 +               .start  = 32,
 620 +               .flags  = IORESOURCE_IRQ,
 621 +       },
 622 +};
 623 +
 624 +static struct resource cambria_usb1_resources[] = {
 625 +       {
 626 +               .start  = 0xCE000000,
 627 +               .end    = 0xCE000300,
 628 +               .flags  = IORESOURCE_MEM,
 629 +       },
 630 +       {
 631 +               .start  = 33,
 632 +               .flags  = IORESOURCE_IRQ,
 633 +       },
 634 +};
 635 +
 636 +static u64 ehci_dma_mask = ~(u32)0;
 637 +
 638 +static struct usb_ehci_pdata cambria_usb_pdata = {
 639 +       .big_endian_desc = 1,
 640 +       .big_endian_mmio = 1,
 641 +       .has_tt = 1,
 642 +       .caps_offset = 0x100,
 643 +};
 644 +
 645 +static struct platform_device cambria_usb0_device =  {
 646 +       .name           = "ehci-platform",
 647 +       .id             = 0,
 648 +       .resource       = cambria_usb0_resources,
 649 +       .num_resources  = ARRAY_SIZE(cambria_usb0_resources),
 650 +       .dev = {
 651 +               .dma_mask               = &ehci_dma_mask,
 652 +               .coherent_dma_mask      = 0xffffffff,
 653 +               .platform_data = &cambria_usb_pdata,
 654 +       },
 655 +};
 656 +
 657 +static struct platform_device cambria_usb1_device = {
 658 +       .name           = "ehci-platform",
 659 +       .id             = 1,
 660 +       .resource       = cambria_usb1_resources,
 661 +       .num_resources  = ARRAY_SIZE(cambria_usb1_resources),
 662 +       .dev = {
 663 +               .dma_mask               = &ehci_dma_mask,
 664 +               .coherent_dma_mask      = 0xffffffff,
 665 +               .platform_data = &cambria_usb_pdata,
 666 +       },
 667 +};
 668 +
 669 +static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
 670 +       .gpio_base      = 16,
 671 +       .nr_gpio        = 8,
 672 +};
 673 +
 674 +static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
 675 +       .gpio_base      = 24,
 676 +       .nr_gpio        = 2,
 677 +};
 678 +
 679 +
 680 +static struct gpio_keys_button cambria_gpio_buttons[] = {
 681 +       {
 682 +               .desc           = "user",
 683 +               .type           = EV_KEY,
 684 +               .code           = BTN_0,
 685 +               .debounce_interval = 6,
 686 +               .gpio           = 25,
 687 +       }
 688 +};
 689 +
 690 +static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
 691 +       .poll_interval  = 500,
 692 +       .nbuttons       = 1,
 693 +       .buttons        = cambria_gpio_buttons,
 694 +};
 695 +
 696 +static struct platform_device cambria_gpio_buttons_device = {
 697 +       .name                   = "gpio-keys-polled",
 698 +       .id                     = -1,
 699 +       .dev.platform_data      = &cambria_gpio_buttons_data,
 700 +};
 701 +
 702 +static struct platform_device *cambria_devices[] __initdata = {
 703 +       &cambria_i2c_gpio,
 704 +       &cambria_flash,
 705 +       &cambria_uart,
 706 +};
 707 +
 708 +static int cambria_register_gpio(struct gpio *array, size_t num)
 709 +{
 710 +       int i, err, ret;
 711 +
 712 +       ret = 0;
 713 +       for (i = 0; i < num; i++, array++) {
 714 +               const char *label = array->label;
 715 +               if (label[0] == '*')
 716 +                       label++;
 717 +               err = gpio_request_one(array->gpio, array->flags, label);
 718 +               if (err)
 719 +                       ret = err;
 720 +               else {
 721 +                       err = gpio_export(array->gpio, array->label[0] != '*');
 722 +               }
 723 +       }
 724 +       return ret;
 725 +}
 726 +
 727 +static void __init cambria_gw23xx_setup(void)
 728 +{
 729 +       cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
 730 +                                                                                                                                               (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
 731 +       cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
 732 +
 733 +       platform_device_register(&cambria_npec_device);
 734 +       platform_device_register(&cambria_npea_device);
 735 +}
 736 +
 737 +static void __init cambria_gw2350_setup(void)
 738 +{
 739 +       *IXP4XX_EXP_CS2 = 0xBFFF3C43;
 740 +       irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
 741 +       cambria_optional_uart_data[0].mapbase   = 0x52FF0000;
 742 +       cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
 743 +       cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
 744 +
 745 +       *IXP4XX_EXP_CS3 = 0xBFFF3C43;
 746 +       irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
 747 +       cambria_optional_uart_data[1].mapbase   = 0x53FF0000;
 748 +       cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
 749 +       cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
 750 +
 751 +       cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
 752 +                                                                                                                                               (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
 753 +       cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
 754 +
 755 +       platform_device_register(&cambria_optional_uart);
 756 +       platform_device_register(&cambria_npec_device);
 757 +       platform_device_register(&cambria_npea_device);
 758 +
 759 +       platform_device_register(&cambria_usb0_device);
 760 +       platform_device_register(&cambria_usb1_device);
 761 +
 762 +       platform_device_register(&cambria_gpio_leds_device);
 763 +
 764 +       /* gpio config (/sys/class/gpio) */
 765 +       cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
 766 +}
 767 +
 768 +static void __init cambria_gw2358_setup(void)
 769 +{
 770 +       *IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
 771 +       irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
 772 +       cambria_optional_uart_data[0].mapbase   = 0x53FC0000;
 773 +       cambria_optional_uart_data[0].membase   = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
 774 +       cambria_optional_uart_data[0].irq               = IRQ_IXP4XX_GPIO3;
 775 +
 776 +       irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
 777 +       cambria_optional_uart_data[1].mapbase   = 0x53F80000;
 778 +       cambria_optional_uart_data[1].membase   = (void __iomem *)ioremap(0x53F80000, 0x0fff);
 779 +       cambria_optional_uart_data[1].irq               = IRQ_IXP4XX_GPIO4;
 780 +
 781 +       cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
 782 +                                                                                                                                               (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
 783 +       cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
 784 +
 785 +       platform_device_register(&cambria_optional_uart);
 786 +
 787 +       platform_device_register(&cambria_npec_device);
 788 +       platform_device_register(&cambria_npea_device);
 789 +
 790 +       platform_device_register(&cambria_usb0_device);
 791 +       platform_device_register(&cambria_usb1_device);
 792 +
 793 +       platform_device_register(&cambria_pata);
 794 +
 795 +       cambria_gpio_leds[0].gpio = 24;
 796 +       platform_device_register(&cambria_gpio_leds_device);
 797 +
 798 +       platform_device_register(&cambria_latch_leds_device);
 799 +
 800 +       platform_device_register(&cambria_gpio_buttons_device);
 801 +
 802 +       /* gpio config (/sys/class/gpio) */
 803 +       cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
 804 +}
 805 +
 806 +static void __init cambria_gw2359_setup(void)
 807 +{
 808 +#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
 809 +       /* The mvswitch driver has some hard-coded values which could
 810 +        * easily be turned into a platform resource if needed.  For now they
 811 +        * match our hardware configuration:
 812 +        *  MV_BASE    0x10 - phy base address
 813 +        *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
 814 +        *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
 815 +        *
 816 +        * The mvswitch driver registers a fixup which forces a driver match
 817 +        * if phy_addr matches MV_BASE
 818 +        *
 819 +        * Two static defautl VLAN's are created: WAN port in 1, and all other ports
 820 +        * in the other.
 821 +        */
 822 +       cambria_npea_data.phy = 0x10; // mvswitch driver catches this
 823 +#else
 824 +       // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
 825 +       cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
 826 +       // CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
 827 +       cambria_npec_data.phy = 0x14;
 828 +#endif
 829 +       platform_device_register(&cambria_npec_device);
 830 +       platform_device_register(&cambria_npea_device);
 831 +
 832 +       platform_device_register(&cambria_usb0_device);
 833 +       platform_device_register(&cambria_usb1_device);
 834 +
 835 +       cambria_gpio_leds_data.num_leds = 3;
 836 +       cambria_gpio_leds[0].name = "user1";
 837 +       cambria_gpio_leds[0].gpio = 125; // PNLLED1#
 838 +       cambria_gpio_leds[1].gpio = 126; // PNLLED3#
 839 +       cambria_gpio_leds[2].gpio = 119; // PNLLED4#
 840 +       platform_device_register(&cambria_gpio_leds_device);
 841 +
 842 +#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
 843 +       cambria_gpio_buttons[0].gpio = 100;
 844 +       platform_device_register(&cambria_gpio_buttons_device);
 845 +#endif
 846 +
 847 +       /* gpio config (/sys/class/gpio) */
 848 +       cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
 849 +}
 850 +
 851 +static void __init cambria_gw2360_setup(void)
 852 +{
 853 +       /* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
 854 +        * The chip-selects are expanded via a 3-to-8 decoder and CS2
 855 +        * and they are 8bit devices
 856 +        */
 857 +       *IXP4XX_EXP_CS2 = 0xBFFF3C43;
 858 +       cambria_optional_uart_data[0].mapbase = 0x52000000;
 859 +       cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
 860 +       cambria_optional_uart_data[0].uartclk = 18432000;
 861 +       cambria_optional_uart_data[0].iotype  = UPIO_MEM;
 862 +       cambria_optional_uart_data[0].irq     = IRQ_IXP4XX_GPIO2;
 863 +       irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
 864 +
 865 +       cambria_optional_uart_data[1].mapbase = 0x52000008;
 866 +       cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
 867 +       cambria_optional_uart_data[1].uartclk = 18432000;
 868 +       cambria_optional_uart_data[1].iotype  = UPIO_MEM;
 869 +       cambria_optional_uart_data[1].irq     = IRQ_IXP4XX_GPIO3;
 870 +       irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
 871 +
 872 +       cambria_optional_uart_data[2].mapbase = 0x52000010;
 873 +       cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
 874 +       cambria_optional_uart_data[2].uartclk = 18432000;
 875 +       cambria_optional_uart_data[2].iotype  = UPIO_MEM;
 876 +       cambria_optional_uart_data[2].irq     = IRQ_IXP4XX_GPIO4;
 877 +       irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
 878 +
 879 +       cambria_optional_uart_data[3].mapbase = 0x52000018;
 880 +       cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
 881 +       cambria_optional_uart_data[3].uartclk = 18432000;
 882 +       cambria_optional_uart_data[3].iotype  = UPIO_MEM;
 883 +       cambria_optional_uart_data[3].irq     = IRQ_IXP4XX_GPIO5;
 884 +       irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
 885 +
 886 +       cambria_optional_uart_data[4].mapbase = 0x52000020;
 887 +       cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
 888 +       cambria_optional_uart_data[4].uartclk = 18432000;
 889 +       cambria_optional_uart_data[4].iotype  = UPIO_MEM;
 890 +       cambria_optional_uart_data[4].irq     = IRQ_IXP4XX_GPIO8;
 891 +       irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
 892 +
 893 +       cambria_optional_uart_data[5].mapbase = 0x52000028;
 894 +       cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
 895 +       cambria_optional_uart_data[5].uartclk = 18432000;
 896 +       cambria_optional_uart_data[5].iotype  = UPIO_MEM;
 897 +       cambria_optional_uart_data[5].irq     = IRQ_IXP4XX_GPIO9;
 898 +       irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
 899 +
 900 +       cambria_optional_uart_data[6].mapbase = 0x52000030;
 901 +       cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
 902 +       cambria_optional_uart_data[6].uartclk = 18432000;
 903 +       cambria_optional_uart_data[6].iotype  = UPIO_MEM;
 904 +       cambria_optional_uart_data[6].irq     = IRQ_IXP4XX_GPIO10;
 905 +       irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
 906 +
 907 +       cambria_optional_uart.num_resources   = 7,
 908 +       platform_device_register(&cambria_optional_uart);
 909 +
 910 +#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
 911 +       /* The mvswitch driver has some hard-coded values which could
 912 +        * easily be turned into a platform resource if needed.  For now they
 913 +        * match our hardware configuration:
 914 +        *  MV_BASE    0x10 - phy base address
 915 +        *  MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
 916 +        *  MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
 917 +        *
 918 +        * The mvswitch driver registers a fixup which forces a driver match
 919 +        * if phy_addr matches MV_BASE
 920 +        *
 921 +        * Two static defautl VLAN's are created: WAN port in 1, and all other ports
 922 +        * in the other.
 923 +        */
 924 +       cambria_npea_data.phy = 0x10; // mvswitch driver catches this
 925 +#else
 926 +       // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
 927 +       cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
 928 +#endif
 929 +
 930 +       // disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
 931 +       //cambria_npec_data.noautoneg = 1;   // disable autoneg
 932 +       cambria_npec_data.speed_10 = 0;    // 100mbps
 933 +       cambria_npec_data.half_duplex = 0; // full-duplex
 934 +       platform_device_register(&cambria_npec_device);
 935 +       platform_device_register(&cambria_npea_device);
 936 +
 937 +       platform_device_register(&cambria_usb0_device);
 938 +       platform_device_register(&cambria_usb1_device);
 939 +
 940 +       cambria_gpio_leds_data.num_leds = 3;
 941 +       cambria_gpio_leds[0].name = "user1";
 942 +       cambria_gpio_leds[0].gpio = 125;
 943 +       cambria_gpio_leds[1].gpio = 126;
 944 +       cambria_gpio_leds[2].gpio = 119;
 945 +       platform_device_register(&cambria_gpio_leds_device);
 946 +
 947 +#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
 948 +       cambria_gpio_buttons[0].gpio = 100;
 949 +       platform_device_register(&cambria_gpio_buttons_device);
 950 +#endif
 951 +
 952 +#ifdef SFP_SERIALID
 953 +       /* the SFP modules each have an i2c bus for serial ident via GSC GPIO
 954 +        * To use these the i2c-gpio driver must be changed to use the _cansleep
 955 +        * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
 956 +        * use that anyway as it doesn't operate in an IRQ context).
 957 +        * Additionally the i2c-gpio module must set the gpio to output-high prior
 958 +        * to changing direction to an input to enable internal Pullups
 959 +        */
 960 +       platform_device_register(&cambria_i2c_gpio_sfpa);
 961 +       platform_device_register(&cambria_i2c_gpio_sfpb);
 962 +#endif
 963 +
 964 +       /* gpio config (/sys/class/gpio) */
 965 +       cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
 966 +}
 967 +
 968 +static struct cambria_board_info cambria_boards[] __initdata = {
 969 +       {
 970 +               .model  = "GW2350",
 971 +               .setup  = cambria_gw2350_setup,
 972 +       }, {
 973 +               .model  = "GW2351",
 974 +               .setup  = cambria_gw2350_setup,
 975 +       }, {
 976 +               .model  = "GW2358",
 977 +               .setup  = cambria_gw2358_setup,
 978 +       }, {
 979 +               .model  = "GW2359",
 980 +               .setup  = cambria_gw2359_setup,
 981 +       }, {
 982 +               .model  = "GW2360",
 983 +               .setup  = cambria_gw2360_setup,
 984 +       }, {
 985 +               .model  = "GW2371",
 986 +               .setup  = cambria_gw2358_setup,
 987 +       }
 988 +};
 989 +
 990 +static struct cambria_board_info * __init cambria_find_board_info(char *model)
 991 +{
 992 +       int i;
 993 +       model[6] = '\0';
 994 +
 995 +       for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
 996 +               struct cambria_board_info *info = &cambria_boards[i];
 997 +               if (strcmp(info->model, model) == 0)
 998 +                       return info;
 999 +       }
1000 +
1001 +       return NULL;
1002 +}
1003 +
1004 +static struct memory_accessor *at24_mem_acc;
1005 +
1006 +static void at24_setup(struct memory_accessor *mem_acc, void *context)
1007 +{
1008 +       char mac_addr[ETH_ALEN];
1009 +       char model[7];
1010 +
1011 +       at24_mem_acc = mem_acc;
1012 +
1013 +       /* Read MAC addresses */
1014 +       if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
1015 +               memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
1016 +       }
1017 +       if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
1018 +               memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
1019 +       }
1020 +
1021 +       /* Read the first 6 bytes of the model number */
1022 +       if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
1023 +               cambria_info = cambria_find_board_info(model);
1024 +       }
1025 +
1026 +}
1027 +
1028 +static struct at24_platform_data cambria_eeprom_info = {
1029 +       .byte_len       = 1024,
1030 +       .page_size      = 16,
1031 +       .flags          = AT24_FLAG_READONLY,
1032 +       .setup          = at24_setup,
1033 +};
1034 +
1035 +static struct pca953x_platform_data cambria_pca_data = {
1036 +       .gpio_base = 100,
1037 +       .irq_base = -1,
1038 +};
1039 +
1040 +static struct pca953x_platform_data cambria_pca2_data = {
1041 +       .gpio_base = 116,
1042 +       .irq_base = -1,
1043 +};
1044 +
1045 +static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
1046 +       {
1047 +               I2C_BOARD_INFO("pca9555", 0x23),
1048 +               .platform_data = &cambria_pca_data,
1049 +       },
1050 +       {
1051 +               I2C_BOARD_INFO("pca9555", 0x27),
1052 +               .platform_data = &cambria_pca2_data,
1053 +       },
1054 +       {
1055 +               I2C_BOARD_INFO("ds1672", 0x68),
1056 +       },
1057 +       {
1058 +               I2C_BOARD_INFO("gsp", 0x29),
1059 +       },
1060 +       {
1061 +               I2C_BOARD_INFO("ad7418", 0x28),
1062 +       },
1063 +       {
1064 +               I2C_BOARD_INFO("24c08", 0x51),
1065 +               .platform_data  = &cambria_eeprom_info
1066 +       },
1067 +       {
1068 +               I2C_BOARD_INFO("gw_i2c_pld", 0x56),
1069 +               .platform_data  = &gw_i2c_pld_data0,
1070 +       },
1071 +       {
1072 +               I2C_BOARD_INFO("gw_i2c_pld", 0x57),
1073 +               .platform_data  = &gw_i2c_pld_data1,
1074 +       },
1075 +};
1076 +
1077 +static void __init cambria_init(void)
1078 +{
1079 +       ixp4xx_sys_init();
1080 +
1081 +       cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
1082 +       cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
1083 +
1084 +       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
1085 +       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
1086 +
1087 +       platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
1088 +
1089 +       cambria_pata_resources[0].start = 0x53e00000;
1090 +       cambria_pata_resources[0].end = 0x53e3ffff;
1091 +
1092 +       cambria_pata_resources[1].start = 0x53e40000;
1093 +       cambria_pata_resources[1].end = 0x53e7ffff;
1094 +
1095 +       cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
1096 +       cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
1097 +
1098 +       i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
1099 +}
1100 +
1101 +static int __init cambria_model_setup(void)
1102 +{
1103 +       if (!machine_is_cambria())
1104 +               return 0;
1105 +
1106 +       if (cambria_info) {
1107 +               printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
1108 +                               cambria_info->model);
1109 +               cambria_info->setup();
1110 +       } else {
1111 +               printk(KERN_INFO "Unknown/missing Cambria model number"
1112 +                               " -- defaults will be used\n");
1113 +               cambria_gw23xx_setup();
1114 +       }
1115 +
1116 +       return 0;
1117 +}
1118 +late_initcall(cambria_model_setup);
1119 +
1120 +MACHINE_START(CAMBRIA, "Gateworks Cambria series")
1121 +       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
1122 +       .map_io         = ixp4xx_map_io,
1123 +       .init_irq       = ixp4xx_init_irq,
1124 +       .init_time      = ixp4xx_timer_init,
1125 +       .atag_offset    = 0x0100,
1126 +       .init_machine   = cambria_init,
1127 +#if defined(CONFIG_PCI)
1128 +       .dma_zone_size  = SZ_64M,
1129 +#endif
1130 +       .restart        = ixp4xx_restart,
1131 +MACHINE_END