target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts

   1 /*
   2  * Copyright 2013 Gateworks Corporation
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 #include "imx6q-ventana.dtsi"
  14
  15 / {
  16         model = "Gateworks Ventana GW5400-A";
  17         compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
  18
  19         aliases {
  20                 ethernet0 = &fec;
  21                 ethernet1 = &eth1;
  22                 sky2 = &eth1;
  23         };
  24
  25         /* SDRAM addressing */
  26         memory {
  27                 reg = <0x10000000 0x40000000>;
  28         };
  29
  30         chosen {
  31                 bootargs = "console=ttymxc1,115200";
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 led0: user0 {
  38                         label = "user0";
  39                         gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG# */
  40                         linux,default-trigger = "heartbeat";
  41                 };
  42
  43                 led1: user1 {
  44                         label = "user1";
  45                         gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR# */
  46                 };
  47
  48                 led2: user2 {
  49                         label = "user2";
  50                         gpios = <&gpio4 15 0>; /* 111 -> MX6_LOCLEDR# */
  51                 };
  52         };
  53
  54         regulators {
  55                 compatible = "simple-bus";
  56
  57                 reg_2p5v: 2p5v {
  58                         compatible = "regulator-fixed";
  59                         regulator-name = "2P5V";
  60                         regulator-min-microvolt = <2500000>;
  61                         regulator-max-microvolt = <2500000>;
  62                         regulator-always-on;
  63                 };
  64
  65                 reg_3p3v: 3p3v {
  66                         compatible = "regulator-fixed";
  67                         regulator-name = "3P3V";
  68                         regulator-min-microvolt = <3300000>;
  69                         regulator-max-microvolt = <3300000>;
  70                         regulator-always-on;
  71                 };
  72
  73                 reg_usb_otg_vbus: usb_otg_vbus {
  74                         compatible = "regulator-fixed";
  75                         regulator-name = "usb_otg_vbus";
  76                         regulator-min-microvolt = <5000000>;
  77                         regulator-max-microvolt = <5000000>;
  78                         gpio = <&gpio3 22 0>;
  79                         enable-active-high;
  80                 };
  81         };
  82
  83         sound {
  84                 compatible = "fsl,imx6q-sabrelite-sgtl5000",
  85                              "fsl,imx-audio-sgtl5000";
  86                 model = "imx6q-sabrelite-sgtl5000";
  87                 ssi-controller = <&ssi1>;
  88                 audio-codec = <&codec>;
  89                 audio-routing =
  90                         "MIC_IN", "Mic Jack",
  91                         "Mic Jack", "Mic Bias",
  92                         "Headphone Jack", "HP_OUT";
  93                 mux-int-port = <1>;
  94                 mux-ext-port = <4>;
  95         };
  96 };
  97
  98 &iomuxc {
  99         pinctrl-names = "default";
 100         pinctrl-0 = <&pinctrl_hog>;
 101
 102         hog {
 103                 pinctrl_hog: hoggrp {
 104                         fsl,pins = <
 105                                 /* USB OTG Power Enable */
 106                                 MX6Q_PAD_EIM_D22__GPIO3_IO22   0x80000000
 107
 108                                 /*  3:19 SPINOR_CS0# */
 109                                 MX6Q_PAD_EIM_D19__GPIO3_IO19   0x80000000
 110
 111                                 /*  1:09 MX6_DIO0 (could also be PWM1_PWM0) */
 112                                 MX6Q_PAD_GPIO_9__GPIO1_IO09    0x80000000
 113                                 /*  1:19 MX6_DIO1 (could also be PWM2_PWM0) */
 114                                 MX6Q_PAD_SD1_DAT2__GPIO1_IO19  0x80000000
 115                                 /*  2:09 MX6_DIO2 (could also be PWM3_PWM0) */
 116                                 MX6Q_PAD_SD4_DAT1__GPIO2_IO09  0x80000000
 117                                 /*  2:10 MX6_DIO3 (could also be PWM3_PWM0) */
 118                                 MX6Q_PAD_SD4_DAT2__GPIO2_IO10  0x80000000
 119
 120                                 /*  1:16 USBHUB_RST# */
 121                                 MX6Q_PAD_SD1_DAT0__GPIO1_IO16   0x80000000
 122
 123                                 /* PCIE IRQ */
 124                                 MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000
 125                                 /* PCIE RST */
 126                                 MX6Q_PAD_ENET_TXD1__GPIO1_IO29  0x08000000
 127
 128                                 /*  1:12 MIPI_DIO */
 129                                 MX6Q_PAD_SD1_DAT3__GPIO1_IO21   0x80000000
 130
 131                                 /*  AUD4_MCK */
 132                                 MX6Q_PAD_GPIO_0__CCM_CLKO1      0x80000000
 133                          >;
 134                 };
 135         };
 136
 137 #if 0
 138         /* ipu1: IPU1_CSI0: HDMI reciver (Digital Video In) */
 139         ipu1 {
 140                 pinctrl_ipu1_1: ipu1grp-5 {
 141                         fsl,pins = <
 142                                 MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC
 143                                 MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN
 144                                 MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK
 145                                 MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC
 146                                 MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_DATA04
 147                                 MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_DATA05
 148                                 MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_DATA06
 149                                 MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_DATA07
 150                                 MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_DATA08
 151                                 MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_DATA09
 152                                 MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_DATA10
 153                                 MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_DATA11
 154                                 MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_DATA12
 155                                 MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_DATA13
 156                                 MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_DATA14
 157                                 MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_DATA15
 158                                 MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_DATA16
 159                                 MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_DATA17
 160                                 MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_DATA18
 161                                 MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_DATA19
 162                         >;
 163                 };
 164         };
 165
 166         /* ipu2: IPU1_CSI1: Analog Video Decoder (Analog Video In) */
 167         /* IPU2_CSI1: Analog Video Decoder (Analog Video In) */
 168         ipu2 {
 169                 pinctrl_ipu2_1: ipu2grp-1 {
 170                         fsl,pins = <
 171                                 MX6Q_PAD_EIM_A17__IPU2_CSI1_DATA12
 172                                 MX6Q_PAD_EIM_D27__IPU2_CSI1_DATA13
 173                                 MX6Q_PAD_EIM_D26__IPU2_CSI1_DATA14
 174                                 MX6Q_PAD_EIM_D20__IPU2_CSI1_DATA15
 175                                 MX6Q_PAD_EIM_D19__IPU2_CSI1_DATA16
 176                                 MX6Q_PAD_EIM_D18__IPU2_CSI1_DATA17
 177                                 MX6Q_PAD_EIM_D16__IPU2_CSI1_DATA18
 178                                 MX6Q_PAD_EIM_EB2__IPU2_CSI1_DATA19
 179
 180                                 MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC
 181                                 MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC
 182 // not sure why this causes kernel to crash in early init
 183 //                      MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK
 184                         >;
 185                 };
 186         };
 187
 188         /* ipu3: IPU2_DISP0: Analog Video Encoder (Analog Video Out) */
 189         ipu3 {
 190                 pinctrl_ipu3_1: ipu3grp-5 {
 191                         fsl,pins = <
 192                                 MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DATA00
 193                                 MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DATA01
 194                                 MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DATA02
 195                                 MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DATA03
 196                                 MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DATA04
 197                                 MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DATA05
 198                                 MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DATA06
 199                                 MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DATA07
 200                                 MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DATA08
 201                                 MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DATA09
 202                                 MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DATA10
 203                                 MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DATA11
 204                                 MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DATA12
 205                                 MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DATA13
 206                                 MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DATA14
 207                                 MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DATA15
 208                         >;
 209                 };
 210         };
 211 #endif
 212 };
 213
 214 &ecspi1 {
 215         pinctrl-names = "default";
 216         pinctrl-0 = <&pinctrl_ecspi1_1>;
 217         status = "okay";
 218
 219         flash: m25p80@0 {
 220                 #address-cells = <1>;
 221                 #size-cells = <1>;
 222                 compatible = "sst,w25q256";
 223                 spi-max-frequency = <30000000>;
 224                 reg = <0>;
 225         };
 226 };
 227
 228 &uart1 {
 229         pinctrl-names = "default";
 230         pinctrl-0 = <&pinctrl_uart1_2>;
 231         status = "okay";
 232 };
 233
 234 &uart2 {
 235         pinctrl-names = "default";
 236         pinctrl-0 = <&pinctrl_uart2_2>;
 237         status = "okay";
 238 };
 239
 240 &uart3 {
 241         pinctrl-names = "default";
 242         pinctrl-0 = <&pinctrl_uart3_1>;
 243         status = "okay";
 244 };
 245
 246 &uart5 {
 247         status = "okay";
 248         pinctrl-names = "default";
 249         pinctrl-0 = <&pinctrl_uart5_1>;
 250 };
 251
 252 &ssi1 {
 253         fsl,mode = "i2s-slave";
 254         status = "okay";
 255 };
 256
 257 &ssi2 {
 258         fsl,mode = "i2s-slave";
 259         status = "okay";
 260 };
 261
 262 &can1 {
 263         reg = <0x02090000 0x4000>;
 264         interrupts = <0 110 0x04>;
 265         //clock-frequency
 266         status = "okay";
 267 };
 268
 269 &usbh1 {
 270         status = "okay";
 271 };
 272
 273 &pcie {
 274         rst-gpios = <&gpio1 29 0>; /* PCIESWT_RST# */
 275         clken-gpios = <&gpio1 20 0>; /* not used */
 276         status = "okay";
 277
 278         eth1: sky2@8 { /* MAC/PHY on bus 8 */
 279                 compatible = "marvell,sky2";
 280                 /* Filled in by U-Boot */
 281                 mac-address = [ 00 00 00 00 00 00 ];
 282         };
 283 };
 284
 285 &fec {
 286         pinctrl-names = "default";
 287         pinctrl-0 = <&pinctrl_enet_1>;
 288         phy-mode = "rgmii";
 289         phy-reset-gpios = <&gpio1 30 0>;
 290         status = "okay";
 291 };
 292
 293 &usdhc3 {
 294         pinctrl-names = "default";
 295         pinctrl-0 = <&pinctrl_usdhc3_2>;
 296         cd-gpios = <&gpio7 0 0>;
 297         vmmc-supply = <&reg_3p3v>;
 298         status = "okay";
 299 };
 300
 301 &audmux {
 302         pinctrl-names = "default";
 303         pinctrl-0 = <&pinctrl_audmux_3>;
 304         status = "okay";
 305 };
 306
 307 &i2c1 {
 308         status = "okay";
 309         clock-frequency = <100000>;
 310         pinctrl-names = "default";
 311         pinctrl-0 = <&pinctrl_i2c1_1>;
 312
 313         eeprom: eeprom@50 {
 314                 compatible = "atmel,24c02";
 315                 reg = <0x50>;
 316                 pagesize = <16>;
 317         };
 318
 319         eeprom1: eeprom@50 {
 320                 compatible = "atmel,24c02";
 321                 reg = <0x50>;
 322                 pagesize = <16>;
 323         };
 324
 325         eeprom2: eeprom@51 {
 326                 compatible = "atmel,24c02";
 327                 reg = <0x51>;
 328                 pagesize = <16>;
 329         };
 330
 331         eeprom3: eeprom@52 {
 332                 compatible = "atmel,24c02";
 333                 reg = <0x52>;
 334                 pagesize = <16>;
 335         };
 336
 337         eeprom4: eeprom@53 {
 338                 compatible = "atmel,24c02";
 339                 reg = <0x53>;
 340                 pagesize = <16>;
 341         };
 342
 343         rtc: ds1672@68 {
 344                 compatible = "dallas,ds1672";
 345                 reg = <0x68>;
 346         };
 347
 348         gpio: pca9555@23 {
 349                 compatible = "nxp,pca9555";
 350                 reg = <0x23>;
 351                 gpio-controller;
 352                 #gpio-cells = <2>;
 353         };
 354
 355         hwmon: gsc@29 {
 356                 compatible = "gw,gsp";
 357                 reg = <0x29>;
 358         };
 359 };
 360
 361 &i2c2 {
 362         status = "okay";
 363         clock-frequency = <100000>;
 364         pinctrl-names = "default";
 365         pinctrl-0 = <&pinctrl_i2c2_2>;
 366
 367         pmic: pfuze@08 {
 368                 compatible = "fsl,pfuze100";
 369                 reg = <0x0a>;
 370         };
 371
 372         pciswitch: pex8609@3f {
 373                 compatible = "plx,pex8609";
 374                 reg = <0x3f>;
 375         };
 376
 377         pciclkgen: si52147@6b {
 378                 compatible = "sil,si52147";
 379                 reg = <0x6b>;
 380         };
 381 };
 382
 383 &i2c3 {
 384         status = "okay";
 385         clock-frequency = <100000>;
 386         pinctrl-names = "default";
 387         pinctrl-0 = <&pinctrl_i2c3_2>;
 388
 389         codec: sgtl5000@0a {
 390                 compatible = "fsl,sgtl5000";
 391                 reg = <0x0a>;
 392                 clocks = <&clks 169>;
 393                 VDDA-supply = <&reg_2p5v>;
 394                 VDDIO-supply = <&reg_3p3v>;
 395         };
 396
 397         accelerometer: mma8450@1c {
 398                 compatible = "fsl,mma8450";
 399                 reg = <0x1c>;
 400         };
 401
 402         videoout: adv7393@2a {
 403                 compatible = "adi,adv7393";
 404                 reg = <0x2a>;
 405         };
 406
 407         videoin: adv7180@20 {
 408                 compatible = "adi,adv7180";
 409                 reg = <0x20>;
 410         };
 411
 412         hdmiin: adv7611@4c {
 413                 compatible = "adi,adv7611";
 414                 reg = <0x4c>;
 415         };
 416
 417         touchscreen: egalax_ts@04 {
 418                 compatible = "eeti,egalax_ts";
 419                 reg = <0x04>;
 420                 wakeup-gpios = <&gpio1 12 0>;
 421         };
 422 };
 423
 424 &ldb {
 425         status = "okay";
 426         lvds-channel@0 {
 427                 crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
 428         };
 429 };