kernel: fix ip6_tunnel compilation
[openwrt.git] / target / linux / generic / patches-4.4 / 862-gpio_spi_driver.patch
1 THIS CODE IS DEPRECATED.
2
3 Please use the new mainline SPI-GPIO driver, as of 2.6.29.
4
5 --mb
6
7
8
9 ---
10  drivers/spi/Kconfig              |    9 +
11  drivers/spi/Makefile             |    1 
12  drivers/spi/spi_gpio_old.c       |  251 +++++++++++++++++++++++++++++++++++++++
13  include/linux/spi/spi_gpio_old.h |   73 +++++++++++
14  4 files changed, 334 insertions(+)
15
16 --- /dev/null
17 +++ b/include/linux/spi/spi_gpio_old.h
18 @@ -0,0 +1,73 @@
19 +/*
20 + * spi_gpio interface to platform code
21 + *
22 + * Copyright (c) 2008 Piotr Skamruk
23 + * Copyright (c) 2008 Michael Buesch
24 + *
25 + * This program is free software; you can redistribute it and/or modify
26 + * it under the terms of the GNU General Public License version 2 as
27 + * published by the Free Software Foundation.
28 + */
29 +#ifndef _LINUX_SPI_SPI_GPIO
30 +#define _LINUX_SPI_SPI_GPIO
31 +
32 +#include <linux/types.h>
33 +#include <linux/spi/spi.h>
34 +
35 +
36 +/**
37 + * struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
38 + *
39 + * This structure holds information about a GPIO-based SPI device.
40 + *
41 + * @pin_clk: The GPIO pin number of the CLOCK pin.
42 + *
43 + * @pin_miso: The GPIO pin number of the MISO pin.
44 + *
45 + * @pin_mosi: The GPIO pin number of the MOSI pin.
46 + *
47 + * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
48 + *
49 + * @cs_activelow: If true, the chip is selected when the CS line is low.
50 + *
51 + * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
52 + *                Note that doing no delay is not standards compliant,
53 + *                but it might be needed to speed up transfers on some
54 + *                slow embedded machines.
55 + *
56 + * @boardinfo_setup: This callback is called after the
57 + *                   SPI master device was registered, but before the
58 + *                   device is registered.
59 + * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
60 + */
61 +struct spi_gpio_platform_data {
62 +       unsigned int pin_clk;
63 +       unsigned int pin_miso;
64 +       unsigned int pin_mosi;
65 +       unsigned int pin_cs;
66 +       bool cs_activelow;
67 +       bool no_spi_delay;
68 +       int (*boardinfo_setup)(struct spi_board_info *bi,
69 +                              struct spi_master *master,
70 +                              void *data);
71 +       void *boardinfo_setup_data;
72 +};
73 +
74 +/**
75 + * SPI_GPIO_PLATDEV_NAME - The platform device name string.
76 + *
77 + * The name string that has to be used for platform_device_alloc
78 + * when allocating a spi-gpio device.
79 + */
80 +#define SPI_GPIO_PLATDEV_NAME  "spi-gpio"
81 +
82 +/**
83 + * spi_gpio_next_id - Get another platform device ID number.
84 + *
85 + * This returns the next platform device ID number that has to be used
86 + * for platform_device_alloc. The ID is opaque and should not be used for
87 + * anything else.
88 + */
89 +int spi_gpio_next_id(void);
90 +
91 +#endif /* _LINUX_SPI_SPI_GPIO */
92 --- /dev/null
93 +++ b/drivers/spi/spi_gpio_old.c
94 @@ -0,0 +1,251 @@
95 +/*
96 + * Bitbanging SPI bus driver using GPIO API
97 + *
98 + * Copyright (c) 2008 Piotr Skamruk
99 + * Copyright (c) 2008 Michael Buesch
100 + *
101 + * based on spi_s3c2410_gpio.c
102 + *   Copyright (c) 2006 Ben Dooks
103 + *   Copyright (c) 2006 Simtec Electronics
104 + * and on i2c-gpio.c
105 + *   Copyright (C) 2007 Atmel Corporation
106 + *
107 + * This program is free software; you can redistribute it and/or modify
108 + * it under the terms of the GNU General Public License version 2 as
109 + * published by the Free Software Foundation.
110 + */
111 +
112 +#include <linux/kernel.h>
113 +#include <linux/init.h>
114 +#include <linux/delay.h>
115 +#include <linux/spinlock.h>
116 +#include <linux/workqueue.h>
117 +#include <linux/module.h>
118 +#include <linux/platform_device.h>
119 +#include <linux/spi/spi.h>
120 +#include <linux/spi/spi_bitbang.h>
121 +#include <linux/spi/spi_gpio_old.h>
122 +#include <linux/gpio.h>
123 +#include <asm/atomic.h>
124 +
125 +
126 +struct spi_gpio {
127 +       struct spi_bitbang bitbang;
128 +       struct spi_gpio_platform_data *info;
129 +       struct platform_device *pdev;
130 +       struct spi_board_info bi;
131 +};
132 +
133 +
134 +static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
135 +{
136 +       return dev->controller_data;
137 +}
138 +
139 +static inline void setsck(struct spi_device *dev, int val)
140 +{
141 +       struct spi_gpio *sp = spidev_to_sg(dev);
142 +       gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
143 +}
144 +
145 +static inline void setmosi(struct spi_device *dev, int val)
146 +{
147 +       struct spi_gpio *sp = spidev_to_sg(dev);
148 +       gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
149 +}
150 +
151 +static inline u32 getmiso(struct spi_device *dev)
152 +{
153 +       struct spi_gpio *sp = spidev_to_sg(dev);
154 +       return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
155 +}
156 +
157 +static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
158 +{
159 +       struct spi_gpio *sp = spidev_to_sg(dev);
160 +
161 +       if (!sp->info->no_spi_delay)
162 +               ndelay(nsecs);
163 +}
164 +
165 +#define spidelay(nsecs) do {                                   \
166 +       /* Steal the spi_device pointer from our caller.        \
167 +        * The bitbang-API should probably get fixed here... */ \
168 +       do_spidelay(spi, nsecs);                                \
169 +  } while (0)
170 +
171 +#define EXPAND_BITBANG_TXRX
172 +#include "spi-bitbang-txrx.h"
173 +
174 +static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
175 +                              unsigned nsecs, u32 word, u8 bits)
176 +{
177 +       return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
178 +}
179 +
180 +static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
181 +                              unsigned nsecs, u32 word, u8 bits)
182 +{
183 +       return bitbang_txrx_be_cpha1(spi, nsecs, 0, 0, word, bits);
184 +}
185 +
186 +static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
187 +                              unsigned nsecs, u32 word, u8 bits)
188 +{
189 +       return bitbang_txrx_be_cpha0(spi, nsecs, 1, 0, word, bits);
190 +}
191 +
192 +static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
193 +                              unsigned nsecs, u32 word, u8 bits)
194 +{
195 +       return bitbang_txrx_be_cpha1(spi, nsecs, 1, 0, word, bits);
196 +}
197 +
198 +static void spi_gpio_chipselect(struct spi_device *dev, int on)
199 +{
200 +       struct spi_gpio *sp = spidev_to_sg(dev);
201 +
202 +       if (sp->info->cs_activelow)
203 +               on = !on;
204 +       gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
205 +}
206 +
207 +static int spi_gpio_probe(struct platform_device *pdev)
208 +{
209 +       struct spi_master *master;
210 +       struct spi_gpio_platform_data *pdata;
211 +       struct spi_gpio *sp;
212 +       struct spi_device *spidev;
213 +       int err;
214 +
215 +       pdata = pdev->dev.platform_data;
216 +       if (!pdata)
217 +               return -ENXIO;
218 +
219 +       err = -ENOMEM;
220 +       master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
221 +       if (!master)
222 +               goto err_alloc_master;
223 +
224 +       sp = spi_master_get_devdata(master);
225 +       platform_set_drvdata(pdev, sp);
226 +       sp->info = pdata;
227 +
228 +       err = gpio_request(pdata->pin_clk, "spi_clock");
229 +       if (err)
230 +               goto err_request_clk;
231 +       err = gpio_request(pdata->pin_mosi, "spi_mosi");
232 +       if (err)
233 +               goto err_request_mosi;
234 +       err = gpio_request(pdata->pin_miso, "spi_miso");
235 +       if (err)
236 +               goto err_request_miso;
237 +       err = gpio_request(pdata->pin_cs, "spi_cs");
238 +       if (err)
239 +               goto err_request_cs;
240 +
241 +       sp->bitbang.master = spi_master_get(master);
242 +       sp->bitbang.master->bus_num = -1;
243 +       sp->bitbang.master->num_chipselect = 1;
244 +       sp->bitbang.chipselect = spi_gpio_chipselect;
245 +       sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
246 +       sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
247 +       sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
248 +       sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
249 +
250 +       gpio_direction_output(pdata->pin_clk, 0);
251 +       gpio_direction_output(pdata->pin_mosi, 0);
252 +       gpio_direction_output(pdata->pin_cs,
253 +                             pdata->cs_activelow ? 1 : 0);
254 +       gpio_direction_input(pdata->pin_miso);
255 +
256 +       err = spi_bitbang_start(&sp->bitbang);
257 +       if (err)
258 +               goto err_no_bitbang;
259 +       err = pdata->boardinfo_setup(&sp->bi, master,
260 +                                    pdata->boardinfo_setup_data);
261 +       if (err)
262 +               goto err_bi_setup;
263 +       sp->bi.controller_data = sp;
264 +       spidev = spi_new_device(master, &sp->bi);
265 +       if (!spidev)
266 +               goto err_new_dev;
267 +
268 +       return 0;
269 +
270 +err_new_dev:
271 +err_bi_setup:
272 +       spi_bitbang_stop(&sp->bitbang);
273 +err_no_bitbang:
274 +       spi_master_put(sp->bitbang.master);
275 +       gpio_free(pdata->pin_cs);
276 +err_request_cs:
277 +       gpio_free(pdata->pin_miso);
278 +err_request_miso:
279 +       gpio_free(pdata->pin_mosi);
280 +err_request_mosi:
281 +       gpio_free(pdata->pin_clk);
282 +err_request_clk:
283 +       kfree(master);
284 +
285 +err_alloc_master:
286 +       return err;
287 +}
288 +
289 +static int spi_gpio_remove(struct platform_device *pdev)
290 +{
291 +       struct spi_gpio *sp;
292 +       struct spi_gpio_platform_data *pdata;
293 +
294 +       pdata = pdev->dev.platform_data;
295 +       sp = platform_get_drvdata(pdev);
296 +
297 +       gpio_free(pdata->pin_clk);
298 +       gpio_free(pdata->pin_mosi);
299 +       gpio_free(pdata->pin_miso);
300 +       gpio_free(pdata->pin_cs);
301 +       spi_bitbang_stop(&sp->bitbang);
302 +       spi_master_put(sp->bitbang.master);
303 +
304 +       return 0;
305 +}
306 +
307 +static struct platform_driver spi_gpio_driver = {
308 +       .driver         = {
309 +               .name   = SPI_GPIO_PLATDEV_NAME,
310 +               .owner  = THIS_MODULE,
311 +       },
312 +       .probe          = spi_gpio_probe,
313 +       .remove         = spi_gpio_remove,
314 +};
315 +
316 +int spi_gpio_next_id(void)
317 +{
318 +       static atomic_t counter = ATOMIC_INIT(-1);
319 +
320 +       return atomic_inc_return(&counter);
321 +}
322 +EXPORT_SYMBOL(spi_gpio_next_id);
323 +
324 +static int __init spi_gpio_init(void)
325 +{
326 +       int err;
327 +
328 +       err = platform_driver_register(&spi_gpio_driver);
329 +       if (err)
330 +               printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
331 +
332 +       return err;
333 +}
334 +module_init(spi_gpio_init);
335 +
336 +static void __exit spi_gpio_exit(void)
337 +{
338 +       platform_driver_unregister(&spi_gpio_driver);
339 +}
340 +module_exit(spi_gpio_exit);
341 +
342 +MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
343 +MODULE_AUTHOR("Michael Buesch");
344 +MODULE_DESCRIPTION("Platform independent GPIO bitbanging SPI driver");
345 +MODULE_LICENSE("GPL v2");
346 --- a/drivers/spi/Kconfig
347 +++ b/drivers/spi/Kconfig
348 @@ -254,6 +254,15 @@ config SPI_IMG_SPFI
349           This enables support for the SPFI master controller found on
350           IMG SoCs.
351  
352 +config SPI_GPIO_OLD
353 +       tristate "Old GPIO API based bitbanging SPI controller (DEPRECATED)"
354 +       depends on SPI_MASTER && GPIOLIB
355 +       select SPI_BITBANG
356 +       help
357 +         This code is deprecated. Please use the new mainline SPI-GPIO driver.
358 +
359 +         If unsure, say N.
360 +
361  config SPI_IMX
362         tristate "Freescale i.MX SPI controllers"
363         depends on ARCH_MXC || COMPILE_TEST
364 --- a/drivers/spi/Makefile
365 +++ b/drivers/spi/Makefile
366 @@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_FSL_LIB)             += spi-fsl-li
367  obj-$(CONFIG_SPI_FSL_ESPI)             += spi-fsl-espi.o
368  obj-$(CONFIG_SPI_FSL_SPI)              += spi-fsl-spi.o
369  obj-$(CONFIG_SPI_GPIO)                 += spi-gpio.o
370 +obj-$(CONFIG_SPI_GPIO_OLD)             += spi_gpio_old.o
371  obj-$(CONFIG_SPI_IMG_SPFI)             += spi-img-spfi.o
372  obj-$(CONFIG_SPI_IMX)                  += spi-imx.o
373  obj-$(CONFIG_SPI_LM70_LLP)             += spi-lm70llp.o