kernel: bcma: update to wireless-testing master-2013-10-01
[openwrt.git] / target / linux / generic / patches-3.6 / 020-ssb_update.patch
1 --- a/arch/mips/bcm47xx/nvram.c
2 +++ b/arch/mips/bcm47xx/nvram.c
3 @@ -43,8 +43,8 @@ static void early_nvram_init(void)
4  #ifdef CONFIG_BCM47XX_SSB
5         case BCM47XX_BUS_TYPE_SSB:
6                 mcore_ssb = &bcm47xx_bus.ssb.mipscore;
7 -               base = mcore_ssb->flash_window;
8 -               lim = mcore_ssb->flash_window_size;
9 +               base = mcore_ssb->pflash.window;
10 +               lim = mcore_ssb->pflash.window_size;
11                 break;
12  #endif
13  #ifdef CONFIG_BCM47XX_BCMA
14 --- a/arch/mips/bcm47xx/wgt634u.c
15 +++ b/arch/mips/bcm47xx/wgt634u.c
16 @@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
17                                             SSB_CHIPCO_IRQ_GPIO);
18                 }
19  
20 -               wgt634u_flash_data.width = mcore->flash_buswidth;
21 -               wgt634u_flash_resource.start = mcore->flash_window;
22 -               wgt634u_flash_resource.end = mcore->flash_window
23 -                                          + mcore->flash_window_size
24 +               wgt634u_flash_data.width = mcore->pflash.buswidth;
25 +               wgt634u_flash_resource.start = mcore->pflash.window;
26 +               wgt634u_flash_resource.end = mcore->pflash.window
27 +                                          + mcore->pflash.window_size
28                                            - 1;
29                 return platform_add_devices(wgt634u_devices,
30                                             ARRAY_SIZE(wgt634u_devices));
31 --- a/drivers/ssb/Kconfig
32 +++ b/drivers/ssb/Kconfig
33 @@ -136,10 +136,15 @@ config SSB_DRIVER_MIPS
34  
35           If unsure, say N
36  
37 +config SSB_SFLASH
38 +       bool "SSB serial flash support"
39 +       depends on SSB_DRIVER_MIPS
40 +       default y
41 +
42  # Assumption: We are on embedded, if we compile the MIPS core.
43  config SSB_EMBEDDED
44         bool
45 -       depends on SSB_DRIVER_MIPS
46 +       depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
47         default y
48  
49  config SSB_DRIVER_EXTIF
50 @@ -160,4 +165,12 @@ config SSB_DRIVER_GIGE
51  
52           If unsure, say N
53  
54 +config SSB_DRIVER_GPIO
55 +       bool "SSB GPIO driver"
56 +       depends on SSB && GPIOLIB
57 +       help
58 +         Driver to provide access to the GPIO pins on the bus.
59 +
60 +         If unsure, say N
61 +
62  endmenu
63 --- a/drivers/ssb/Makefile
64 +++ b/drivers/ssb/Makefile
65 @@ -11,10 +11,12 @@ ssb-$(CONFIG_SSB_SDIOHOST)          += sdio.o
66  # built-in drivers
67  ssb-y                                  += driver_chipcommon.o
68  ssb-y                                  += driver_chipcommon_pmu.o
69 +ssb-$(CONFIG_SSB_SFLASH)               += driver_chipcommon_sflash.o
70  ssb-$(CONFIG_SSB_DRIVER_MIPS)          += driver_mipscore.o
71  ssb-$(CONFIG_SSB_DRIVER_EXTIF)         += driver_extif.o
72  ssb-$(CONFIG_SSB_DRIVER_PCICORE)       += driver_pcicore.o
73  ssb-$(CONFIG_SSB_DRIVER_GIGE)          += driver_gige.o
74 +ssb-$(CONFIG_SSB_DRIVER_GPIO)          += driver_gpio.o
75  
76  # b43 pci-ssb-bridge driver
77  # Not strictly a part of SSB, but kept here for convenience
78 --- a/drivers/ssb/b43_pci_bridge.c
79 +++ b/drivers/ssb/b43_pci_bridge.c
80 @@ -37,6 +37,7 @@ static const struct pci_device_id b43_pc
81         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
82         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
83         { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432c) },
84 +       { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4350) },
85         { 0, },
86  };
87  MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
88 --- a/drivers/ssb/driver_chipcommon.c
89 +++ b/drivers/ssb/driver_chipcommon.c
90 @@ -4,6 +4,7 @@
91   *
92   * Copyright 2005, Broadcom Corporation
93   * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
94 + * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
95   *
96   * Licensed under the GNU/GPL. See COPYING for details.
97   */
98 @@ -12,6 +13,7 @@
99  #include <linux/ssb/ssb_regs.h>
100  #include <linux/export.h>
101  #include <linux/pci.h>
102 +#include <linux/bcm47xx_wdt.h>
103  
104  #include "ssb_private.h"
105  
106 @@ -280,13 +282,79 @@ static void calc_fast_powerup_delay(stru
107         cc->fast_pwrup_delay = tmp;
108  }
109  
110 +static u32 ssb_chipco_alp_clock(struct ssb_chipcommon *cc)
111 +{
112 +       if (cc->capabilities & SSB_CHIPCO_CAP_PMU)
113 +               return ssb_pmu_get_alp_clock(cc);
114 +
115 +       return 20000000;
116 +}
117 +
118 +static u32 ssb_chipco_watchdog_get_max_timer(struct ssb_chipcommon *cc)
119 +{
120 +       u32 nb;
121 +
122 +       if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
123 +               if (cc->dev->id.revision < 26)
124 +                       nb = 16;
125 +               else
126 +                       nb = (cc->dev->id.revision >= 37) ? 32 : 24;
127 +       } else {
128 +               nb = 28;
129 +       }
130 +       if (nb == 32)
131 +               return 0xffffffff;
132 +       else
133 +               return (1 << nb) - 1;
134 +}
135 +
136 +u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
137 +{
138 +       struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
139 +
140 +       if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
141 +               return 0;
142 +
143 +       return ssb_chipco_watchdog_timer_set(cc, ticks);
144 +}
145 +
146 +u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
147 +{
148 +       struct ssb_chipcommon *cc = bcm47xx_wdt_get_drvdata(wdt);
149 +       u32 ticks;
150 +
151 +       if (cc->dev->bus->bustype != SSB_BUSTYPE_SSB)
152 +               return 0;
153 +
154 +       ticks = ssb_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
155 +       return ticks / cc->ticks_per_ms;
156 +}
157 +
158 +static int ssb_chipco_watchdog_ticks_per_ms(struct ssb_chipcommon *cc)
159 +{
160 +       struct ssb_bus *bus = cc->dev->bus;
161 +
162 +       if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
163 +                       /* based on 32KHz ILP clock */
164 +                       return 32;
165 +       } else {
166 +               if (cc->dev->id.revision < 18)
167 +                       return ssb_clockspeed(bus) / 1000;
168 +               else
169 +                       return ssb_chipco_alp_clock(cc) / 1000;
170 +       }
171 +}
172 +
173  void ssb_chipcommon_init(struct ssb_chipcommon *cc)
174  {
175         if (!cc->dev)
176                 return; /* We don't have a ChipCommon */
177 +
178 +       spin_lock_init(&cc->gpio_lock);
179 +
180         if (cc->dev->id.revision >= 11)
181                 cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
182 -       ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status);
183 +       ssb_dbg("chipcommon status is 0x%x\n", cc->status);
184  
185         if (cc->dev->id.revision >= 20) {
186                 chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0);
187 @@ -297,6 +365,11 @@ void ssb_chipcommon_init(struct ssb_chip
188         chipco_powercontrol_init(cc);
189         ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
190         calc_fast_powerup_delay(cc);
191 +
192 +       if (cc->dev->bus->bustype == SSB_BUSTYPE_SSB) {
193 +               cc->ticks_per_ms = ssb_chipco_watchdog_ticks_per_ms(cc);
194 +               cc->max_timer_ms = ssb_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
195 +       }
196  }
197  
198  void ssb_chipco_suspend(struct ssb_chipcommon *cc)
199 @@ -395,10 +468,27 @@ void ssb_chipco_timing_init(struct ssb_c
200  }
201  
202  /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
203 -void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
204 +u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
205  {
206 -       /* instant NMI */
207 -       chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
208 +       u32 maxt;
209 +       enum ssb_clkmode clkmode;
210 +
211 +       maxt = ssb_chipco_watchdog_get_max_timer(cc);
212 +       if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
213 +               if (ticks == 1)
214 +                       ticks = 2;
215 +               else if (ticks > maxt)
216 +                       ticks = maxt;
217 +               chipco_write32(cc, SSB_CHIPCO_PMU_WATCHDOG, ticks);
218 +       } else {
219 +               clkmode = ticks ? SSB_CLKMODE_FAST : SSB_CLKMODE_DYNAMIC;
220 +               ssb_chipco_set_clockmode(cc, clkmode);
221 +               if (ticks > maxt)
222 +                       ticks = maxt;
223 +               /* instant NMI */
224 +               chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
225 +       }
226 +       return ticks;
227  }
228  
229  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value)
230 @@ -418,28 +508,93 @@ u32 ssb_chipco_gpio_in(struct ssb_chipco
231  
232  u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
233  {
234 -       return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
235 +       unsigned long flags;
236 +       u32 res = 0;
237 +
238 +       spin_lock_irqsave(&cc->gpio_lock, flags);
239 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
240 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
241 +
242 +       return res;
243  }
244  
245  u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
246  {
247 -       return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
248 +       unsigned long flags;
249 +       u32 res = 0;
250 +
251 +       spin_lock_irqsave(&cc->gpio_lock, flags);
252 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
253 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
254 +
255 +       return res;
256  }
257  
258  u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value)
259  {
260 -       return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
261 +       unsigned long flags;
262 +       u32 res = 0;
263 +
264 +       spin_lock_irqsave(&cc->gpio_lock, flags);
265 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
266 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
267 +
268 +       return res;
269  }
270  EXPORT_SYMBOL(ssb_chipco_gpio_control);
271  
272  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
273  {
274 -       return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
275 +       unsigned long flags;
276 +       u32 res = 0;
277 +
278 +       spin_lock_irqsave(&cc->gpio_lock, flags);
279 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value);
280 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
281 +
282 +       return res;
283  }
284  
285  u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value)
286  {
287 -       return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
288 +       unsigned long flags;
289 +       u32 res = 0;
290 +
291 +       spin_lock_irqsave(&cc->gpio_lock, flags);
292 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value);
293 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
294 +
295 +       return res;
296 +}
297 +
298 +u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value)
299 +{
300 +       unsigned long flags;
301 +       u32 res = 0;
302 +
303 +       if (cc->dev->id.revision < 20)
304 +               return 0xffffffff;
305 +
306 +       spin_lock_irqsave(&cc->gpio_lock, flags);
307 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLUP, mask, value);
308 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
309 +
310 +       return res;
311 +}
312 +
313 +u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value)
314 +{
315 +       unsigned long flags;
316 +       u32 res = 0;
317 +
318 +       if (cc->dev->id.revision < 20)
319 +               return 0xffffffff;
320 +
321 +       spin_lock_irqsave(&cc->gpio_lock, flags);
322 +       res = chipco_write32_masked(cc, SSB_CHIPCO_GPIOPULLDOWN, mask, value);
323 +       spin_unlock_irqrestore(&cc->gpio_lock, flags);
324 +
325 +       return res;
326  }
327  
328  #ifdef CONFIG_SSB_SERIAL
329 @@ -473,12 +628,7 @@ int ssb_chipco_serial_init(struct ssb_ch
330                                        chipco_read32(cc, SSB_CHIPCO_CORECTL)
331                                        | SSB_CHIPCO_CORECTL_UARTCLK0);
332                 } else if ((ccrev >= 11) && (ccrev != 15)) {
333 -                       /* Fixed ALP clock */
334 -                       baud_base = 20000000;
335 -                       if (cc->capabilities & SSB_CHIPCO_CAP_PMU) {
336 -                               /* FIXME: baud_base is different for devices with a PMU */
337 -                               SSB_WARN_ON(1);
338 -                       }
339 +                       baud_base = ssb_chipco_alp_clock(cc);
340                         div = 1;
341                         if (ccrev >= 21) {
342                                 /* Turn off UART clock before switching clocksource. */
343 --- a/drivers/ssb/driver_chipcommon_pmu.c
344 +++ b/drivers/ssb/driver_chipcommon_pmu.c
345 @@ -110,8 +110,8 @@ static void ssb_pmu0_pllinit_r0(struct s
346                 return;
347         }
348  
349 -       ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
350 -                  (crystalfreq / 1000), (crystalfreq % 1000));
351 +       ssb_info("Programming PLL to %u.%03u MHz\n",
352 +                crystalfreq / 1000, crystalfreq % 1000);
353  
354         /* First turn the PLL off. */
355         switch (bus->chip_id) {
356 @@ -138,7 +138,7 @@ static void ssb_pmu0_pllinit_r0(struct s
357         }
358         tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
359         if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
360 -               ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
361 +               ssb_emerg("Failed to turn the PLL off!\n");
362  
363         /* Set PDIV in PLL control 0. */
364         pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
365 @@ -249,8 +249,8 @@ static void ssb_pmu1_pllinit_r0(struct s
366                 return;
367         }
368  
369 -       ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
370 -                  (crystalfreq / 1000), (crystalfreq % 1000));
371 +       ssb_info("Programming PLL to %u.%03u MHz\n",
372 +                crystalfreq / 1000, crystalfreq % 1000);
373  
374         /* First turn the PLL off. */
375         switch (bus->chip_id) {
376 @@ -275,7 +275,7 @@ static void ssb_pmu1_pllinit_r0(struct s
377         }
378         tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
379         if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
380 -               ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
381 +               ssb_emerg("Failed to turn the PLL off!\n");
382  
383         /* Set p1div and p2div. */
384         pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
385 @@ -346,10 +346,11 @@ static void ssb_pmu_pll_init(struct ssb_
386                         chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, 0x380005C0);
387                 }
388                 break;
389 +       case 43222:
390 +               break;
391         default:
392 -               ssb_printk(KERN_ERR PFX
393 -                          "ERROR: PLL init unknown for device %04X\n",
394 -                          bus->chip_id);
395 +               ssb_err("ERROR: PLL init unknown for device %04X\n",
396 +                       bus->chip_id);
397         }
398  }
399  
400 @@ -434,6 +435,7 @@ static void ssb_pmu_resources_init(struc
401                  min_msk = 0xCBB;
402                  break;
403         case 0x4322:
404 +       case 43222:
405                 /* We keep the default settings:
406                  * min_msk = 0xCBB
407                  * max_msk = 0x7FFFF
408 @@ -469,9 +471,8 @@ static void ssb_pmu_resources_init(struc
409                 max_msk = 0xFFFFF;
410                 break;
411         default:
412 -               ssb_printk(KERN_ERR PFX
413 -                          "ERROR: PMU resource config unknown for device %04X\n",
414 -                          bus->chip_id);
415 +               ssb_err("ERROR: PMU resource config unknown for device %04X\n",
416 +                       bus->chip_id);
417         }
418  
419         if (updown_tab) {
420 @@ -523,8 +524,8 @@ void ssb_pmu_init(struct ssb_chipcommon
421         pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
422         cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
423  
424 -       ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
425 -                   cc->pmu.rev, pmucap);
426 +       ssb_dbg("Found rev %u PMU (capabilities 0x%08X)\n",
427 +               cc->pmu.rev, pmucap);
428  
429         if (cc->pmu.rev == 1)
430                 chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
431 @@ -615,6 +616,32 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
432  EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
433  EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
434  
435 +static u32 ssb_pmu_get_alp_clock_clk0(struct ssb_chipcommon *cc)
436 +{
437 +       u32 crystalfreq;
438 +       const struct pmu0_plltab_entry *e = NULL;
439 +
440 +       crystalfreq = chipco_read32(cc, SSB_CHIPCO_PMU_CTL) &
441 +                     SSB_CHIPCO_PMU_CTL_XTALFREQ >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT;
442 +       e = pmu0_plltab_find_entry(crystalfreq);
443 +       BUG_ON(!e);
444 +       return e->freq * 1000;
445 +}
446 +
447 +u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc)
448 +{
449 +       struct ssb_bus *bus = cc->dev->bus;
450 +
451 +       switch (bus->chip_id) {
452 +       case 0x5354:
453 +               ssb_pmu_get_alp_clock_clk0(cc);
454 +       default:
455 +               ssb_err("ERROR: PMU alp clock unknown for device %04X\n",
456 +                       bus->chip_id);
457 +               return 0;
458 +       }
459 +}
460 +
461  u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
462  {
463         struct ssb_bus *bus = cc->dev->bus;
464 @@ -624,9 +651,8 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chi
465                 /* 5354 chip uses a non programmable PLL of frequency 240MHz */
466                 return 240000000;
467         default:
468 -               ssb_printk(KERN_ERR PFX
469 -                          "ERROR: PMU cpu clock unknown for device %04X\n",
470 -                          bus->chip_id);
471 +               ssb_err("ERROR: PMU cpu clock unknown for device %04X\n",
472 +                       bus->chip_id);
473                 return 0;
474         }
475  }
476 @@ -639,9 +665,52 @@ u32 ssb_pmu_get_controlclock(struct ssb_
477         case 0x5354:
478                 return 120000000;
479         default:
480 -               ssb_printk(KERN_ERR PFX
481 -                          "ERROR: PMU controlclock unknown for device %04X\n",
482 -                          bus->chip_id);
483 +               ssb_err("ERROR: PMU controlclock unknown for device %04X\n",
484 +                       bus->chip_id);
485                 return 0;
486         }
487  }
488 +
489 +void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
490 +{
491 +       u32 pmu_ctl = 0;
492 +
493 +       switch (cc->dev->bus->chip_id) {
494 +       case 0x4322:
495 +               ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
496 +               ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
497 +               ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
498 +               if (spuravoid == 1)
499 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
500 +               else
501 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
502 +               pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
503 +               break;
504 +       case 43222:
505 +               if (spuravoid == 1) {
506 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11500008);
507 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0C000C06);
508 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x0F600a08);
509 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
510 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x2001E920);
511 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888815);
512 +               } else {
513 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100008);
514 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x0c000c06);
515 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x03000a08);
516 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, 0x00000000);
517 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL4, 0x200005c0);
518 +                       ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888855);
519 +               }
520 +               pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
521 +               break;
522 +       default:
523 +               ssb_printk(KERN_ERR PFX
524 +                          "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
525 +                          cc->dev->bus->chip_id);
526 +               return;
527 +       }
528 +
529 +       chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
530 +}
531 +EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
532 --- /dev/null
533 +++ b/drivers/ssb/driver_chipcommon_sflash.c
534 @@ -0,0 +1,164 @@
535 +/*
536 + * Sonics Silicon Backplane
537 + * ChipCommon serial flash interface
538 + *
539 + * Licensed under the GNU/GPL. See COPYING for details.
540 + */
541 +
542 +#include <linux/ssb/ssb.h>
543 +
544 +#include "ssb_private.h"
545 +
546 +static struct resource ssb_sflash_resource = {
547 +       .name   = "ssb_sflash",
548 +       .start  = SSB_FLASH2,
549 +       .end    = 0,
550 +       .flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
551 +};
552 +
553 +struct platform_device ssb_sflash_dev = {
554 +       .name           = "ssb_sflash",
555 +       .resource       = &ssb_sflash_resource,
556 +       .num_resources  = 1,
557 +};
558 +
559 +struct ssb_sflash_tbl_e {
560 +       char *name;
561 +       u32 id;
562 +       u32 blocksize;
563 +       u16 numblocks;
564 +};
565 +
566 +static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
567 +       { "M25P20", 0x11, 0x10000, 4, },
568 +       { "M25P40", 0x12, 0x10000, 8, },
569 +
570 +       { "M25P16", 0x14, 0x10000, 32, },
571 +       { "M25P32", 0x15, 0x10000, 64, },
572 +       { "M25P64", 0x16, 0x10000, 128, },
573 +       { "M25FL128", 0x17, 0x10000, 256, },
574 +       { 0 },
575 +};
576 +
577 +static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
578 +       { "SST25WF512", 1, 0x1000, 16, },
579 +       { "SST25VF512", 0x48, 0x1000, 16, },
580 +       { "SST25WF010", 2, 0x1000, 32, },
581 +       { "SST25VF010", 0x49, 0x1000, 32, },
582 +       { "SST25WF020", 3, 0x1000, 64, },
583 +       { "SST25VF020", 0x43, 0x1000, 64, },
584 +       { "SST25WF040", 4, 0x1000, 128, },
585 +       { "SST25VF040", 0x44, 0x1000, 128, },
586 +       { "SST25VF040B", 0x8d, 0x1000, 128, },
587 +       { "SST25WF080", 5, 0x1000, 256, },
588 +       { "SST25VF080B", 0x8e, 0x1000, 256, },
589 +       { "SST25VF016", 0x41, 0x1000, 512, },
590 +       { "SST25VF032", 0x4a, 0x1000, 1024, },
591 +       { "SST25VF064", 0x4b, 0x1000, 2048, },
592 +       { 0 },
593 +};
594 +
595 +static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
596 +       { "AT45DB011", 0xc, 256, 512, },
597 +       { "AT45DB021", 0x14, 256, 1024, },
598 +       { "AT45DB041", 0x1c, 256, 2048, },
599 +       { "AT45DB081", 0x24, 256, 4096, },
600 +       { "AT45DB161", 0x2c, 512, 4096, },
601 +       { "AT45DB321", 0x34, 512, 8192, },
602 +       { "AT45DB642", 0x3c, 1024, 8192, },
603 +       { 0 },
604 +};
605 +
606 +static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode)
607 +{
608 +       int i;
609 +       chipco_write32(cc, SSB_CHIPCO_FLASHCTL,
610 +                      SSB_CHIPCO_FLASHCTL_START | opcode);
611 +       for (i = 0; i < 1000; i++) {
612 +               if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) &
613 +                     SSB_CHIPCO_FLASHCTL_BUSY))
614 +                       return;
615 +               cpu_relax();
616 +       }
617 +       pr_err("SFLASH control command failed (timeout)!\n");
618 +}
619 +
620 +/* Initialize serial flash access */
621 +int ssb_sflash_init(struct ssb_chipcommon *cc)
622 +{
623 +       struct ssb_sflash *sflash = &cc->dev->bus->mipscore.sflash;
624 +       const struct ssb_sflash_tbl_e *e;
625 +       u32 id, id2;
626 +
627 +       switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
628 +       case SSB_CHIPCO_FLASHT_STSER:
629 +               ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP);
630 +
631 +               chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0);
632 +               ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
633 +               id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
634 +
635 +               chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1);
636 +               ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES);
637 +               id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA);
638 +
639 +               switch (id) {
640 +               case 0xbf:
641 +                       for (e = ssb_sflash_sst_tbl; e->name; e++) {
642 +                               if (e->id == id2)
643 +                                       break;
644 +                       }
645 +                       break;
646 +               case 0x13:
647 +                       return -ENOTSUPP;
648 +               default:
649 +                       for (e = ssb_sflash_st_tbl; e->name; e++) {
650 +                               if (e->id == id)
651 +                                       break;
652 +                       }
653 +                       break;
654 +               }
655 +               if (!e->name) {
656 +                       pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n",
657 +                              id, id2);
658 +                       return -ENOTSUPP;
659 +               }
660 +
661 +               break;
662 +       case SSB_CHIPCO_FLASHT_ATSER:
663 +               ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS);
664 +               id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c;
665 +
666 +               for (e = ssb_sflash_at_tbl; e->name; e++) {
667 +                       if (e->id == id)
668 +                               break;
669 +               }
670 +               if (!e->name) {
671 +                       pr_err("Unsupported Atmel serial flash (id: 0x%X)\n",
672 +                              id);
673 +                       return -ENOTSUPP;
674 +               }
675 +
676 +               break;
677 +       default:
678 +               pr_err("Unsupported flash type\n");
679 +               return -ENOTSUPP;
680 +       }
681 +
682 +       sflash->window = SSB_FLASH2;
683 +       sflash->blocksize = e->blocksize;
684 +       sflash->numblocks = e->numblocks;
685 +       sflash->size = sflash->blocksize * sflash->numblocks;
686 +       sflash->present = true;
687 +
688 +       pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
689 +               e->name, sflash->size / 1024, e->blocksize, e->numblocks);
690 +
691 +       /* Prepare platform device, but don't register it yet. It's too early,
692 +        * malloc (required by device_private_init) is not available yet. */
693 +       ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
694 +                                        sflash->size;
695 +       ssb_sflash_dev.dev.platform_data = sflash;
696 +
697 +       return 0;
698 +}
699 --- a/drivers/ssb/driver_extif.c
700 +++ b/drivers/ssb/driver_extif.c
701 @@ -112,10 +112,37 @@ void ssb_extif_get_clockcontrol(struct s
702         *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
703  }
704  
705 -void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
706 -                                 u32 ticks)
707 +u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks)
708  {
709 +       struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
710 +
711 +       return ssb_extif_watchdog_timer_set(extif, ticks);
712 +}
713 +
714 +u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms)
715 +{
716 +       struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);
717 +       u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms;
718 +
719 +       ticks = ssb_extif_watchdog_timer_set(extif, ticks);
720 +
721 +       return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK;
722 +}
723 +
724 +u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
725 +{
726 +       if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER)
727 +               ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER;
728         extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks);
729 +
730 +       return ticks;
731 +}
732 +
733 +void ssb_extif_init(struct ssb_extif *extif)
734 +{
735 +       if (!extif->dev)
736 +               return; /* We don't have a Extif core */
737 +       spin_lock_init(&extif->gpio_lock);
738  }
739  
740  u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
741 @@ -125,22 +152,50 @@ u32 ssb_extif_gpio_in(struct ssb_extif *
742  
743  u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
744  {
745 -       return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
746 +       unsigned long flags;
747 +       u32 res = 0;
748 +
749 +       spin_lock_irqsave(&extif->gpio_lock, flags);
750 +       res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
751                                    mask, value);
752 +       spin_unlock_irqrestore(&extif->gpio_lock, flags);
753 +
754 +       return res;
755  }
756  
757  u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
758  {
759 -       return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
760 +       unsigned long flags;
761 +       u32 res = 0;
762 +
763 +       spin_lock_irqsave(&extif->gpio_lock, flags);
764 +       res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
765                                    mask, value);
766 +       spin_unlock_irqrestore(&extif->gpio_lock, flags);
767 +
768 +       return res;
769  }
770  
771  u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value)
772  {
773 -       return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
774 +       unsigned long flags;
775 +       u32 res = 0;
776 +
777 +       spin_lock_irqsave(&extif->gpio_lock, flags);
778 +       res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);
779 +       spin_unlock_irqrestore(&extif->gpio_lock, flags);
780 +
781 +       return res;
782  }
783  
784  u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value)
785  {
786 -       return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
787 +       unsigned long flags;
788 +       u32 res = 0;
789 +
790 +       spin_lock_irqsave(&extif->gpio_lock, flags);
791 +       res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);
792 +       spin_unlock_irqrestore(&extif->gpio_lock, flags);
793 +
794 +       return res;
795  }
796 --- /dev/null
797 +++ b/drivers/ssb/driver_gpio.c
798 @@ -0,0 +1,210 @@
799 +/*
800 + * Sonics Silicon Backplane
801 + * GPIO driver
802 + *
803 + * Copyright 2011, Broadcom Corporation
804 + * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
805 + *
806 + * Licensed under the GNU/GPL. See COPYING for details.
807 + */
808 +
809 +#include <linux/gpio.h>
810 +#include <linux/export.h>
811 +#include <linux/ssb/ssb.h>
812 +
813 +#include "ssb_private.h"
814 +
815 +static struct ssb_bus *ssb_gpio_get_bus(struct gpio_chip *chip)
816 +{
817 +       return container_of(chip, struct ssb_bus, gpio);
818 +}
819 +
820 +static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
821 +{
822 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
823 +
824 +       return !!ssb_chipco_gpio_in(&bus->chipco, 1 << gpio);
825 +}
826 +
827 +static void ssb_gpio_chipco_set_value(struct gpio_chip *chip, unsigned gpio,
828 +                                     int value)
829 +{
830 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
831 +
832 +       ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
833 +}
834 +
835 +static int ssb_gpio_chipco_direction_input(struct gpio_chip *chip,
836 +                                          unsigned gpio)
837 +{
838 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
839 +
840 +       ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 0);
841 +       return 0;
842 +}
843 +
844 +static int ssb_gpio_chipco_direction_output(struct gpio_chip *chip,
845 +                                           unsigned gpio, int value)
846 +{
847 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
848 +
849 +       ssb_chipco_gpio_outen(&bus->chipco, 1 << gpio, 1 << gpio);
850 +       ssb_chipco_gpio_out(&bus->chipco, 1 << gpio, value ? 1 << gpio : 0);
851 +       return 0;
852 +}
853 +
854 +static int ssb_gpio_chipco_request(struct gpio_chip *chip, unsigned gpio)
855 +{
856 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
857 +
858 +       ssb_chipco_gpio_control(&bus->chipco, 1 << gpio, 0);
859 +       /* clear pulldown */
860 +       ssb_chipco_gpio_pulldown(&bus->chipco, 1 << gpio, 0);
861 +       /* Set pullup */
862 +       ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 1 << gpio);
863 +
864 +       return 0;
865 +}
866 +
867 +static void ssb_gpio_chipco_free(struct gpio_chip *chip, unsigned gpio)
868 +{
869 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
870 +
871 +       /* clear pullup */
872 +       ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
873 +}
874 +
875 +static int ssb_gpio_chipco_to_irq(struct gpio_chip *chip, unsigned gpio)
876 +{
877 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
878 +
879 +       if (bus->bustype == SSB_BUSTYPE_SSB)
880 +               return ssb_mips_irq(bus->chipco.dev) + 2;
881 +       else
882 +               return -EINVAL;
883 +}
884 +
885 +static int ssb_gpio_chipco_init(struct ssb_bus *bus)
886 +{
887 +       struct gpio_chip *chip = &bus->gpio;
888 +
889 +       chip->label             = "ssb_chipco_gpio";
890 +       chip->owner             = THIS_MODULE;
891 +       chip->request           = ssb_gpio_chipco_request;
892 +       chip->free              = ssb_gpio_chipco_free;
893 +       chip->get               = ssb_gpio_chipco_get_value;
894 +       chip->set               = ssb_gpio_chipco_set_value;
895 +       chip->direction_input   = ssb_gpio_chipco_direction_input;
896 +       chip->direction_output  = ssb_gpio_chipco_direction_output;
897 +       chip->to_irq            = ssb_gpio_chipco_to_irq;
898 +       chip->ngpio             = 16;
899 +       /* There is just one SoC in one device and its GPIO addresses should be
900 +        * deterministic to address them more easily. The other buses could get
901 +        * a random base number. */
902 +       if (bus->bustype == SSB_BUSTYPE_SSB)
903 +               chip->base              = 0;
904 +       else
905 +               chip->base              = -1;
906 +
907 +       return gpiochip_add(chip);
908 +}
909 +
910 +#ifdef CONFIG_SSB_DRIVER_EXTIF
911 +
912 +static int ssb_gpio_extif_get_value(struct gpio_chip *chip, unsigned gpio)
913 +{
914 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
915 +
916 +       return !!ssb_extif_gpio_in(&bus->extif, 1 << gpio);
917 +}
918 +
919 +static void ssb_gpio_extif_set_value(struct gpio_chip *chip, unsigned gpio,
920 +                                    int value)
921 +{
922 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
923 +
924 +       ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
925 +}
926 +
927 +static int ssb_gpio_extif_direction_input(struct gpio_chip *chip,
928 +                                         unsigned gpio)
929 +{
930 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
931 +
932 +       ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 0);
933 +       return 0;
934 +}
935 +
936 +static int ssb_gpio_extif_direction_output(struct gpio_chip *chip,
937 +                                          unsigned gpio, int value)
938 +{
939 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
940 +
941 +       ssb_extif_gpio_outen(&bus->extif, 1 << gpio, 1 << gpio);
942 +       ssb_extif_gpio_out(&bus->extif, 1 << gpio, value ? 1 << gpio : 0);
943 +       return 0;
944 +}
945 +
946 +static int ssb_gpio_extif_to_irq(struct gpio_chip *chip, unsigned gpio)
947 +{
948 +       struct ssb_bus *bus = ssb_gpio_get_bus(chip);
949 +
950 +       if (bus->bustype == SSB_BUSTYPE_SSB)
951 +               return ssb_mips_irq(bus->extif.dev) + 2;
952 +       else
953 +               return -EINVAL;
954 +}
955 +
956 +static int ssb_gpio_extif_init(struct ssb_bus *bus)
957 +{
958 +       struct gpio_chip *chip = &bus->gpio;
959 +
960 +       chip->label             = "ssb_extif_gpio";
961 +       chip->owner             = THIS_MODULE;
962 +       chip->get               = ssb_gpio_extif_get_value;
963 +       chip->set               = ssb_gpio_extif_set_value;
964 +       chip->direction_input   = ssb_gpio_extif_direction_input;
965 +       chip->direction_output  = ssb_gpio_extif_direction_output;
966 +       chip->to_irq            = ssb_gpio_extif_to_irq;
967 +       chip->ngpio             = 5;
968 +       /* There is just one SoC in one device and its GPIO addresses should be
969 +        * deterministic to address them more easily. The other buses could get
970 +        * a random base number. */
971 +       if (bus->bustype == SSB_BUSTYPE_SSB)
972 +               chip->base              = 0;
973 +       else
974 +               chip->base              = -1;
975 +
976 +       return gpiochip_add(chip);
977 +}
978 +
979 +#else
980 +static int ssb_gpio_extif_init(struct ssb_bus *bus)
981 +{
982 +       return -ENOTSUPP;
983 +}
984 +#endif
985 +
986 +int ssb_gpio_init(struct ssb_bus *bus)
987 +{
988 +       if (ssb_chipco_available(&bus->chipco))
989 +               return ssb_gpio_chipco_init(bus);
990 +       else if (ssb_extif_available(&bus->extif))
991 +               return ssb_gpio_extif_init(bus);
992 +       else
993 +               SSB_WARN_ON(1);
994 +
995 +       return -1;
996 +}
997 +
998 +int ssb_gpio_unregister(struct ssb_bus *bus)
999 +{
1000 +       if (ssb_chipco_available(&bus->chipco) ||
1001 +           ssb_extif_available(&bus->extif)) {
1002 +               return gpiochip_remove(&bus->gpio);
1003 +       } else {
1004 +               SSB_WARN_ON(1);
1005 +       }
1006 +
1007 +       return -1;
1008 +}
1009 --- a/drivers/ssb/driver_mipscore.c
1010 +++ b/drivers/ssb/driver_mipscore.c
1011 @@ -10,6 +10,7 @@
1012  
1013  #include <linux/ssb/ssb.h>
1014  
1015 +#include <linux/mtd/physmap.h>
1016  #include <linux/serial.h>
1017  #include <linux/serial_core.h>
1018  #include <linux/serial_reg.h>
1019 @@ -17,6 +18,25 @@
1020  
1021  #include "ssb_private.h"
1022  
1023 +static const char * const part_probes[] = { "bcm47xxpart", NULL };
1024 +
1025 +static struct physmap_flash_data ssb_pflash_data = {
1026 +       .part_probe_types       = part_probes,
1027 +};
1028 +
1029 +static struct resource ssb_pflash_resource = {
1030 +       .name   = "ssb_pflash",
1031 +       .flags  = IORESOURCE_MEM,
1032 +};
1033 +
1034 +struct platform_device ssb_pflash_dev = {
1035 +       .name           = "physmap-flash",
1036 +       .dev            = {
1037 +               .platform_data  = &ssb_pflash_data,
1038 +       },
1039 +       .resource       = &ssb_pflash_resource,
1040 +       .num_resources  = 1,
1041 +};
1042  
1043  static inline u32 mips_read32(struct ssb_mipscore *mcore,
1044                               u16 offset)
1045 @@ -147,21 +167,22 @@ static void set_irq(struct ssb_device *d
1046                 irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]);
1047                 ssb_write32(mdev, SSB_IPSFLAG, irqflag);
1048         }
1049 -       ssb_dprintk(KERN_INFO PFX
1050 -                   "set_irq: core 0x%04x, irq %d => %d\n",
1051 -                   dev->id.coreid, oldirq+2, irq+2);
1052 +       ssb_dbg("set_irq: core 0x%04x, irq %d => %d\n",
1053 +               dev->id.coreid, oldirq+2, irq+2);
1054  }
1055  
1056  static void print_irq(struct ssb_device *dev, unsigned int irq)
1057  {
1058 -       int i;
1059         static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
1060 -       ssb_dprintk(KERN_INFO PFX
1061 -               "core 0x%04x, irq :", dev->id.coreid);
1062 -       for (i = 0; i <= 6; i++) {
1063 -               ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" ");
1064 -       }
1065 -       ssb_dprintk("\n");
1066 +       ssb_dbg("core 0x%04x, irq : %s%s %s%s %s%s %s%s %s%s %s%s %s%s\n",
1067 +               dev->id.coreid,
1068 +               irq_name[0], irq == 0 ? "*" : " ",
1069 +               irq_name[1], irq == 1 ? "*" : " ",
1070 +               irq_name[2], irq == 2 ? "*" : " ",
1071 +               irq_name[3], irq == 3 ? "*" : " ",
1072 +               irq_name[4], irq == 4 ? "*" : " ",
1073 +               irq_name[5], irq == 5 ? "*" : " ",
1074 +               irq_name[6], irq == 6 ? "*" : " ");
1075  }
1076  
1077  static void dump_irq(struct ssb_bus *bus)
1078 @@ -178,9 +199,9 @@ static void ssb_mips_serial_init(struct
1079  {
1080         struct ssb_bus *bus = mcore->dev->bus;
1081  
1082 -       if (bus->extif.dev)
1083 +       if (ssb_extif_available(&bus->extif))
1084                 mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
1085 -       else if (bus->chipco.dev)
1086 +       else if (ssb_chipco_available(&bus->chipco))
1087                 mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports);
1088         else
1089                 mcore->nr_serial_ports = 0;
1090 @@ -189,17 +210,42 @@ static void ssb_mips_serial_init(struct
1091  static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
1092  {
1093         struct ssb_bus *bus = mcore->dev->bus;
1094 +       struct ssb_pflash *pflash = &mcore->pflash;
1095  
1096 -       mcore->flash_buswidth = 2;
1097 -       if (bus->chipco.dev) {
1098 -               mcore->flash_window = 0x1c000000;
1099 -               mcore->flash_window_size = 0x02000000;
1100 +       /* When there is no chipcommon on the bus there is 4MB flash */
1101 +       if (!ssb_chipco_available(&bus->chipco)) {
1102 +               pflash->present = true;
1103 +               pflash->buswidth = 2;
1104 +               pflash->window = SSB_FLASH1;
1105 +               pflash->window_size = SSB_FLASH1_SZ;
1106 +               goto ssb_pflash;
1107 +       }
1108 +
1109 +       /* There is ChipCommon, so use it to read info about flash */
1110 +       switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) {
1111 +       case SSB_CHIPCO_FLASHT_STSER:
1112 +       case SSB_CHIPCO_FLASHT_ATSER:
1113 +               pr_debug("Found serial flash\n");
1114 +               ssb_sflash_init(&bus->chipco);
1115 +               break;
1116 +       case SSB_CHIPCO_FLASHT_PARA:
1117 +               pr_debug("Found parallel flash\n");
1118 +               pflash->present = true;
1119 +               pflash->window = SSB_FLASH2;
1120 +               pflash->window_size = SSB_FLASH2_SZ;
1121                 if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
1122                                & SSB_CHIPCO_CFG_DS16) == 0)
1123 -                       mcore->flash_buswidth = 1;
1124 -       } else {
1125 -               mcore->flash_window = 0x1fc00000;
1126 -               mcore->flash_window_size = 0x00400000;
1127 +                       pflash->buswidth = 1;
1128 +               else
1129 +                       pflash->buswidth = 2;
1130 +               break;
1131 +       }
1132 +
1133 +ssb_pflash:
1134 +       if (pflash->present) {
1135 +               ssb_pflash_data.width = pflash->buswidth;
1136 +               ssb_pflash_resource.start = pflash->window;
1137 +               ssb_pflash_resource.end = pflash->window + pflash->window_size;
1138         }
1139  }
1140  
1141 @@ -211,9 +257,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
1142         if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
1143                 return ssb_pmu_get_cpu_clock(&bus->chipco);
1144  
1145 -       if (bus->extif.dev) {
1146 +       if (ssb_extif_available(&bus->extif)) {
1147                 ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
1148 -       } else if (bus->chipco.dev) {
1149 +       } else if (ssb_chipco_available(&bus->chipco)) {
1150                 ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
1151         } else
1152                 return 0;
1153 @@ -241,7 +287,7 @@ void ssb_mipscore_init(struct ssb_mipsco
1154         if (!mcore->dev)
1155                 return; /* We don't have a MIPS core */
1156  
1157 -       ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
1158 +       ssb_dbg("Initializing MIPS core...\n");
1159  
1160         bus = mcore->dev->bus;
1161         hz = ssb_clockspeed(bus);
1162 @@ -249,9 +295,9 @@ void ssb_mipscore_init(struct ssb_mipsco
1163                 hz = 100000000;
1164         ns = 1000000000 / hz;
1165  
1166 -       if (bus->extif.dev)
1167 +       if (ssb_extif_available(&bus->extif))
1168                 ssb_extif_timing_init(&bus->extif, ns);
1169 -       else if (bus->chipco.dev)
1170 +       else if (ssb_chipco_available(&bus->chipco))
1171                 ssb_chipco_timing_init(&bus->chipco, ns);
1172  
1173         /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
1174 @@ -289,7 +335,7 @@ void ssb_mipscore_init(struct ssb_mipsco
1175                         break;
1176                 }
1177         }
1178 -       ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n");
1179 +       ssb_dbg("after irq reconfiguration\n");
1180         dump_irq(bus);
1181  
1182         ssb_mips_serial_init(mcore);
1183 --- a/drivers/ssb/driver_pcicore.c
1184 +++ b/drivers/ssb/driver_pcicore.c
1185 @@ -263,8 +263,7 @@ int ssb_pcicore_plat_dev_init(struct pci
1186                 return -ENODEV;
1187         }
1188  
1189 -       ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
1190 -                  pci_name(d));
1191 +       ssb_info("PCI: Fixing up device %s\n", pci_name(d));
1192  
1193         /* Fix up interrupt lines */
1194         d->irq = ssb_mips_irq(extpci_core->dev) + 2;
1195 @@ -285,12 +284,12 @@ static void ssb_pcicore_fixup_pcibridge(
1196         if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
1197                 return;
1198  
1199 -       ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
1200 +       ssb_info("PCI: Fixing up bridge %s\n", pci_name(dev));
1201  
1202         /* Enable PCI bridge bus mastering and memory space */
1203         pci_set_master(dev);
1204         if (pcibios_enable_device(dev, ~0) < 0) {
1205 -               ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
1206 +               ssb_err("PCI: SSB bridge enable failed\n");
1207                 return;
1208         }
1209  
1210 @@ -299,8 +298,8 @@ static void ssb_pcicore_fixup_pcibridge(
1211  
1212         /* Make sure our latency is high enough to handle the devices behind us */
1213         lat = 168;
1214 -       ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
1215 -                  pci_name(dev), lat);
1216 +       ssb_info("PCI: Fixing latency timer of device %s to %u\n",
1217 +                pci_name(dev), lat);
1218         pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
1219  }
1220  DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
1221 @@ -323,7 +322,7 @@ static void __devinit ssb_pcicore_init_h
1222                 return;
1223         extpci_core = pc;
1224  
1225 -       ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
1226 +       ssb_dbg("PCIcore in host mode found\n");
1227         /* Reset devices on the external PCI bus */
1228         val = SSB_PCICORE_CTL_RST_OE;
1229         val |= SSB_PCICORE_CTL_CLK_OE;
1230 @@ -338,7 +337,7 @@ static void __devinit ssb_pcicore_init_h
1231         udelay(1); /* Assertion time demanded by the PCI standard */
1232  
1233         if (pc->dev->bus->has_cardbus_slot) {
1234 -               ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n");
1235 +               ssb_dbg("CardBus slot detected\n");
1236                 pc->cardbusmode = 1;
1237                 /* GPIO 1 resets the bridge */
1238                 ssb_gpio_out(pc->dev->bus, 1, 1);
1239 --- a/drivers/ssb/embedded.c
1240 +++ b/drivers/ssb/embedded.c
1241 @@ -4,11 +4,13 @@
1242   *
1243   * Copyright 2005-2008, Broadcom Corporation
1244   * Copyright 2006-2008, Michael Buesch <m@bues.ch>
1245 + * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
1246   *
1247   * Licensed under the GNU/GPL. See COPYING for details.
1248   */
1249  
1250  #include <linux/export.h>
1251 +#include <linux/platform_device.h>
1252  #include <linux/ssb/ssb.h>
1253  #include <linux/ssb/ssb_embedded.h>
1254  #include <linux/ssb/ssb_driver_pci.h>
1255 @@ -32,6 +34,38 @@ int ssb_watchdog_timer_set(struct ssb_bu
1256  }
1257  EXPORT_SYMBOL(ssb_watchdog_timer_set);
1258  
1259 +int ssb_watchdog_register(struct ssb_bus *bus)
1260 +{
1261 +       struct bcm47xx_wdt wdt = {};
1262 +       struct platform_device *pdev;
1263 +
1264 +       if (ssb_chipco_available(&bus->chipco)) {
1265 +               wdt.driver_data = &bus->chipco;
1266 +               wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
1267 +               wdt.timer_set_ms = ssb_chipco_watchdog_timer_set_ms;
1268 +               wdt.max_timer_ms = bus->chipco.max_timer_ms;
1269 +       } else if (ssb_extif_available(&bus->extif)) {
1270 +               wdt.driver_data = &bus->extif;
1271 +               wdt.timer_set = ssb_extif_watchdog_timer_set_wdt;
1272 +               wdt.timer_set_ms = ssb_extif_watchdog_timer_set_ms;
1273 +               wdt.max_timer_ms = SSB_EXTIF_WATCHDOG_MAX_TIMER_MS;
1274 +       } else {
1275 +               return -ENODEV;
1276 +       }
1277 +
1278 +       pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
1279 +                                            bus->busnumber, &wdt,
1280 +                                            sizeof(wdt));
1281 +       if (IS_ERR(pdev)) {
1282 +               ssb_dbg("can not register watchdog device, err: %li\n",
1283 +                       PTR_ERR(pdev));
1284 +               return PTR_ERR(pdev);
1285 +       }
1286 +
1287 +       bus->watchdog = pdev;
1288 +       return 0;
1289 +}
1290 +
1291  u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
1292  {
1293         unsigned long flags;
1294 --- a/drivers/ssb/main.c
1295 +++ b/drivers/ssb/main.c
1296 @@ -13,6 +13,7 @@
1297  #include <linux/delay.h>
1298  #include <linux/io.h>
1299  #include <linux/module.h>
1300 +#include <linux/platform_device.h>
1301  #include <linux/ssb/ssb.h>
1302  #include <linux/ssb/ssb_regs.h>
1303  #include <linux/ssb/ssb_driver_gige.h>
1304 @@ -274,8 +275,8 @@ int ssb_devices_thaw(struct ssb_freeze_c
1305  
1306                 err = sdrv->probe(sdev, &sdev->id);
1307                 if (err) {
1308 -                       ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
1309 -                                  dev_name(sdev->dev));
1310 +                       ssb_err("Failed to thaw device %s\n",
1311 +                               dev_name(sdev->dev));
1312                         result = err;
1313                 }
1314                 ssb_device_put(sdev);
1315 @@ -433,10 +434,23 @@ static void ssb_devices_unregister(struc
1316                 if (sdev->dev)
1317                         device_unregister(sdev->dev);
1318         }
1319 +
1320 +#ifdef CONFIG_SSB_EMBEDDED
1321 +       if (bus->bustype == SSB_BUSTYPE_SSB)
1322 +               platform_device_unregister(bus->watchdog);
1323 +#endif
1324  }
1325  
1326  void ssb_bus_unregister(struct ssb_bus *bus)
1327  {
1328 +       int err;
1329 +
1330 +       err = ssb_gpio_unregister(bus);
1331 +       if (err == -EBUSY)
1332 +               ssb_dbg("Some GPIOs are still in use\n");
1333 +       else if (err)
1334 +               ssb_dbg("Can not unregister GPIO driver: %i\n", err);
1335 +
1336         ssb_buses_lock();
1337         ssb_devices_unregister(bus);
1338         list_del(&bus->list);
1339 @@ -482,8 +496,7 @@ static int ssb_devices_register(struct s
1340  
1341                 devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL);
1342                 if (!devwrap) {
1343 -                       ssb_printk(KERN_ERR PFX
1344 -                                  "Could not allocate device\n");
1345 +                       ssb_err("Could not allocate device\n");
1346                         err = -ENOMEM;
1347                         goto error;
1348                 }
1349 @@ -522,9 +535,7 @@ static int ssb_devices_register(struct s
1350                 sdev->dev = dev;
1351                 err = device_register(dev);
1352                 if (err) {
1353 -                       ssb_printk(KERN_ERR PFX
1354 -                                  "Could not register %s\n",
1355 -                                  dev_name(dev));
1356 +                       ssb_err("Could not register %s\n", dev_name(dev));
1357                         /* Set dev to NULL to not unregister
1358                          * dev on error unwinding. */
1359                         sdev->dev = NULL;
1360 @@ -534,6 +545,22 @@ static int ssb_devices_register(struct s
1361                 dev_idx++;
1362         }
1363  
1364 +#ifdef CONFIG_SSB_DRIVER_MIPS
1365 +       if (bus->mipscore.pflash.present) {
1366 +               err = platform_device_register(&ssb_pflash_dev);
1367 +               if (err)
1368 +                       pr_err("Error registering parallel flash\n");
1369 +       }
1370 +#endif
1371 +
1372 +#ifdef CONFIG_SSB_SFLASH
1373 +       if (bus->mipscore.sflash.present) {
1374 +               err = platform_device_register(&ssb_sflash_dev);
1375 +               if (err)
1376 +                       pr_err("Error registering serial flash\n");
1377 +       }
1378 +#endif
1379 +
1380         return 0;
1381  error:
1382         /* Unwind the already registered devices. */
1383 @@ -561,6 +588,8 @@ static int __devinit ssb_attach_queued_b
1384                 if (err)
1385                         goto error;
1386                 ssb_pcicore_init(&bus->pcicore);
1387 +               if (bus->bustype == SSB_BUSTYPE_SSB)
1388 +                       ssb_watchdog_register(bus);
1389                 ssb_bus_may_powerdown(bus);
1390  
1391                 err = ssb_devices_register(bus);
1392 @@ -796,7 +825,13 @@ static int __devinit ssb_bus_register(st
1393         if (err)
1394                 goto err_pcmcia_exit;
1395         ssb_chipcommon_init(&bus->chipco);
1396 +       ssb_extif_init(&bus->extif);
1397         ssb_mipscore_init(&bus->mipscore);
1398 +       err = ssb_gpio_init(bus);
1399 +       if (err == -ENOTSUPP)
1400 +               ssb_dbg("GPIO driver not activated\n");
1401 +       else if (err)
1402 +               ssb_dbg("Error registering GPIO driver: %i\n", err);
1403         err = ssb_fetch_invariants(bus, get_invariants);
1404         if (err) {
1405                 ssb_bus_may_powerdown(bus);
1406 @@ -847,11 +882,11 @@ int __devinit ssb_bus_pcibus_register(st
1407  
1408         err = ssb_bus_register(bus, ssb_pci_get_invariants, 0);
1409         if (!err) {
1410 -               ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
1411 -                          "PCI device %s\n", dev_name(&host_pci->dev));
1412 +               ssb_info("Sonics Silicon Backplane found on PCI device %s\n",
1413 +                        dev_name(&host_pci->dev));
1414         } else {
1415 -               ssb_printk(KERN_ERR PFX "Failed to register PCI version"
1416 -                          " of SSB with error %d\n", err);
1417 +               ssb_err("Failed to register PCI version of SSB with error %d\n",
1418 +                       err);
1419         }
1420  
1421         return err;
1422 @@ -872,8 +907,8 @@ int __devinit ssb_bus_pcmciabus_register
1423  
1424         err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr);
1425         if (!err) {
1426 -               ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
1427 -                          "PCMCIA device %s\n", pcmcia_dev->devname);
1428 +               ssb_info("Sonics Silicon Backplane found on PCMCIA device %s\n",
1429 +                        pcmcia_dev->devname);
1430         }
1431  
1432         return err;
1433 @@ -895,8 +930,8 @@ int __devinit ssb_bus_sdiobus_register(s
1434  
1435         err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0);
1436         if (!err) {
1437 -               ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
1438 -                          "SDIO device %s\n", sdio_func_id(func));
1439 +               ssb_info("Sonics Silicon Backplane found on SDIO device %s\n",
1440 +                        sdio_func_id(func));
1441         }
1442  
1443         return err;
1444 @@ -915,8 +950,8 @@ int __devinit ssb_bus_ssbbus_register(st
1445  
1446         err = ssb_bus_register(bus, get_invariants, baseaddr);
1447         if (!err) {
1448 -               ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at "
1449 -                          "address 0x%08lX\n", baseaddr);
1450 +               ssb_info("Sonics Silicon Backplane found at address 0x%08lX\n",
1451 +                        baseaddr);
1452         }
1453  
1454         return err;
1455 @@ -1118,8 +1153,7 @@ static u32 ssb_tmslow_reject_bitmask(str
1456         case SSB_IDLOW_SSBREV_27:     /* same here */
1457                 return SSB_TMSLOW_REJECT;       /* this is a guess */
1458         default:
1459 -               printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1460 -               WARN_ON(1);
1461 +               WARN(1, KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev);
1462         }
1463         return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23);
1464  }
1465 @@ -1311,7 +1345,7 @@ out:
1466  #endif
1467         return err;
1468  error:
1469 -       ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
1470 +       ssb_err("Bus powerdown failed\n");
1471         goto out;
1472  }
1473  EXPORT_SYMBOL(ssb_bus_may_powerdown);
1474 @@ -1334,7 +1368,7 @@ int ssb_bus_powerup(struct ssb_bus *bus,
1475  
1476         return 0;
1477  error:
1478 -       ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
1479 +       ssb_err("Bus powerup failed\n");
1480         return err;
1481  }
1482  EXPORT_SYMBOL(ssb_bus_powerup);
1483 @@ -1442,15 +1476,13 @@ static int __init ssb_modinit(void)
1484  
1485         err = b43_pci_ssb_bridge_init();
1486         if (err) {
1487 -               ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
1488 -                          "initialization failed\n");
1489 +               ssb_err("Broadcom 43xx PCI-SSB-bridge initialization failed\n");
1490                 /* don't fail SSB init because of this */
1491                 err = 0;
1492         }
1493         err = ssb_gige_init();
1494         if (err) {
1495 -               ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
1496 -                          "driver initialization failed\n");
1497 +               ssb_err("SSB Broadcom Gigabit Ethernet driver initialization failed\n");
1498                 /* don't fail SSB init because of this */
1499                 err = 0;
1500         }
1501 --- a/drivers/ssb/pci.c
1502 +++ b/drivers/ssb/pci.c
1503 @@ -56,7 +56,7 @@ int ssb_pci_switch_coreidx(struct ssb_bu
1504         }
1505         return 0;
1506  error:
1507 -       ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
1508 +       ssb_err("Failed to switch to core %u\n", coreidx);
1509         return -ENODEV;
1510  }
1511  
1512 @@ -67,10 +67,9 @@ int ssb_pci_switch_core(struct ssb_bus *
1513         unsigned long flags;
1514  
1515  #if SSB_VERBOSE_PCICORESWITCH_DEBUG
1516 -       ssb_printk(KERN_INFO PFX
1517 -                  "Switching to %s core, index %d\n",
1518 -                  ssb_core_name(dev->id.coreid),
1519 -                  dev->core_index);
1520 +       ssb_info("Switching to %s core, index %d\n",
1521 +                ssb_core_name(dev->id.coreid),
1522 +                dev->core_index);
1523  #endif
1524  
1525         spin_lock_irqsave(&bus->bar_lock, flags);
1526 @@ -231,6 +230,15 @@ static inline u8 ssb_crc8(u8 crc, u8 dat
1527         return t[crc ^ data];
1528  }
1529  
1530 +static void sprom_get_mac(char *mac, const u16 *in)
1531 +{
1532 +       int i;
1533 +       for (i = 0; i < 3; i++) {
1534 +               *mac++ = in[i] >> 8;
1535 +               *mac++ = in[i];
1536 +       }
1537 +}
1538 +
1539  static u8 ssb_sprom_crc(const u16 *sprom, u16 size)
1540  {
1541         int word;
1542 @@ -278,7 +286,7 @@ static int sprom_do_write(struct ssb_bus
1543         u32 spromctl;
1544         u16 size = bus->sprom_size;
1545  
1546 -       ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n");
1547 +       ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
1548         err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl);
1549         if (err)
1550                 goto err_ctlreg;
1551 @@ -286,17 +294,17 @@ static int sprom_do_write(struct ssb_bus
1552         err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl);
1553         if (err)
1554                 goto err_ctlreg;
1555 -       ssb_printk(KERN_NOTICE PFX "[ 0%%");
1556 +       ssb_notice("[ 0%%");
1557         msleep(500);
1558         for (i = 0; i < size; i++) {
1559                 if (i == size / 4)
1560 -                       ssb_printk("25%%");
1561 +                       ssb_cont("25%%");
1562                 else if (i == size / 2)
1563 -                       ssb_printk("50%%");
1564 +                       ssb_cont("50%%");
1565                 else if (i == (size * 3) / 4)
1566 -                       ssb_printk("75%%");
1567 +                       ssb_cont("75%%");
1568                 else if (i % 2)
1569 -                       ssb_printk(".");
1570 +                       ssb_cont(".");
1571                 writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
1572                 mmiowb();
1573                 msleep(20);
1574 @@ -309,12 +317,12 @@ static int sprom_do_write(struct ssb_bus
1575         if (err)
1576                 goto err_ctlreg;
1577         msleep(500);
1578 -       ssb_printk("100%% ]\n");
1579 -       ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
1580 +       ssb_cont("100%% ]\n");
1581 +       ssb_notice("SPROM written\n");
1582  
1583         return 0;
1584  err_ctlreg:
1585 -       ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n");
1586 +       ssb_err("Could not access SPROM control register.\n");
1587         return err;
1588  }
1589  
1590 @@ -339,10 +347,23 @@ static s8 r123_extract_antgain(u8 sprom_
1591         return (s8)gain;
1592  }
1593  
1594 +static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in)
1595 +{
1596 +       SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
1597 +       SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
1598 +       SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0);
1599 +       SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0);
1600 +       SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0);
1601 +       SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0);
1602 +       SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0);
1603 +       SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0);
1604 +       SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0);
1605 +       SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO,
1606 +            SSB_SPROM2_MAXP_A_LO_SHIFT);
1607 +}
1608 +
1609  static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
1610  {
1611 -       int i;
1612 -       u16 v;
1613         u16 loc[3];
1614  
1615         if (out->revision == 3)                 /* rev 3 moved MAC */
1616 @@ -352,19 +373,10 @@ static void sprom_extract_r123(struct ss
1617                 loc[1] = SSB_SPROM1_ET0MAC;
1618                 loc[2] = SSB_SPROM1_ET1MAC;
1619         }
1620 -       for (i = 0; i < 3; i++) {
1621 -               v = in[SPOFF(loc[0]) + i];
1622 -               *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
1623 -       }
1624 +       sprom_get_mac(out->il0mac, &in[SPOFF(loc[0])]);
1625         if (out->revision < 3) {        /* only rev 1-2 have et0, et1 */
1626 -               for (i = 0; i < 3; i++) {
1627 -                       v = in[SPOFF(loc[1]) + i];
1628 -                       *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
1629 -               }
1630 -               for (i = 0; i < 3; i++) {
1631 -                       v = in[SPOFF(loc[2]) + i];
1632 -                       *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
1633 -               }
1634 +               sprom_get_mac(out->et0mac, &in[SPOFF(loc[1])]);
1635 +               sprom_get_mac(out->et1mac, &in[SPOFF(loc[2])]);
1636         }
1637         SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
1638         SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
1639 @@ -372,6 +384,7 @@ static void sprom_extract_r123(struct ss
1640         SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
1641         SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
1642         SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
1643 +       SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
1644         if (out->revision == 1)
1645                 SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
1646                      SSB_SPROM1_BINF_CCODE_SHIFT);
1647 @@ -398,8 +411,7 @@ static void sprom_extract_r123(struct ss
1648              SSB_SPROM1_ITSSI_A_SHIFT);
1649         SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
1650         SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
1651 -       if (out->revision >= 2)
1652 -               SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
1653 +
1654         SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8);
1655         SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0);
1656  
1657 @@ -410,6 +422,8 @@ static void sprom_extract_r123(struct ss
1658         out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
1659                                                     SSB_SPROM1_AGAIN_A,
1660                                                     SSB_SPROM1_AGAIN_A_SHIFT);
1661 +       if (out->revision >= 2)
1662 +               sprom_extract_r23(out, in);
1663  }
1664  
1665  /* Revs 4 5 and 8 have partially shared layout */
1666 @@ -454,23 +468,20 @@ static void sprom_extract_r458(struct ss
1667  
1668  static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
1669  {
1670 -       int i;
1671 -       u16 v;
1672         u16 il0mac_offset;
1673  
1674         if (out->revision == 4)
1675                 il0mac_offset = SSB_SPROM4_IL0MAC;
1676         else
1677                 il0mac_offset = SSB_SPROM5_IL0MAC;
1678 -       /* extract the MAC address */
1679 -       for (i = 0; i < 3; i++) {
1680 -               v = in[SPOFF(il0mac_offset) + i];
1681 -               *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
1682 -       }
1683 +
1684 +       sprom_get_mac(out->il0mac, &in[SPOFF(il0mac_offset)]);
1685 +
1686         SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
1687         SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
1688              SSB_SPROM4_ETHPHY_ET1A_SHIFT);
1689         SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0);
1690 +       SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
1691         if (out->revision == 4) {
1692                 SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8);
1693                 SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0);
1694 @@ -530,7 +541,7 @@ static void sprom_extract_r45(struct ssb
1695  static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
1696  {
1697         int i;
1698 -       u16 v, o;
1699 +       u16 o;
1700         u16 pwr_info_offset[] = {
1701                 SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
1702                 SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
1703 @@ -539,11 +550,10 @@ static void sprom_extract_r8(struct ssb_
1704                         ARRAY_SIZE(out->core_pwr_info));
1705  
1706         /* extract the MAC address */
1707 -       for (i = 0; i < 3; i++) {
1708 -               v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
1709 -               *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
1710 -       }
1711 +       sprom_get_mac(out->il0mac, &in[SPOFF(SSB_SPROM8_IL0MAC)]);
1712 +
1713         SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0);
1714 +       SPEX(board_type, SSB_SPROM1_SPID, 0xFFFF, 0);
1715         SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8);
1716         SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0);
1717         SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
1718 @@ -743,7 +753,7 @@ static int sprom_extract(struct ssb_bus
1719         memset(out, 0, sizeof(*out));
1720  
1721         out->revision = in[size - 1] & 0x00FF;
1722 -       ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
1723 +       ssb_dbg("SPROM revision %d detected\n", out->revision);
1724         memset(out->et0mac, 0xFF, 6);           /* preset et0 and et1 mac */
1725         memset(out->et1mac, 0xFF, 6);
1726  
1727 @@ -752,7 +762,7 @@ static int sprom_extract(struct ssb_bus
1728                  * number stored in the SPROM.
1729                  * Always extract r1. */
1730                 out->revision = 1;
1731 -               ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
1732 +               ssb_dbg("SPROM treated as revision %d\n", out->revision);
1733         }
1734  
1735         switch (out->revision) {
1736 @@ -769,9 +779,8 @@ static int sprom_extract(struct ssb_bus
1737                 sprom_extract_r8(out, in);
1738                 break;
1739         default:
1740 -               ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
1741 -                          " revision %d detected. Will extract"
1742 -                          " v1\n", out->revision);
1743 +               ssb_warn("Unsupported SPROM revision %d detected. Will extract v1\n",
1744 +                        out->revision);
1745                 out->revision = 1;
1746                 sprom_extract_r123(out, in);
1747         }
1748 @@ -791,7 +800,7 @@ static int ssb_pci_sprom_get(struct ssb_
1749         u16 *buf;
1750  
1751         if (!ssb_is_sprom_available(bus)) {
1752 -               ssb_printk(KERN_ERR PFX "No SPROM available!\n");
1753 +               ssb_err("No SPROM available!\n");
1754                 return -ENODEV;
1755         }
1756         if (bus->chipco.dev) {  /* can be unavailable! */
1757 @@ -810,7 +819,7 @@ static int ssb_pci_sprom_get(struct ssb_
1758         } else {
1759                 bus->sprom_offset = SSB_SPROM_BASE1;
1760         }
1761 -       ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset);
1762 +       ssb_dbg("SPROM offset is 0x%x\n", bus->sprom_offset);
1763  
1764         buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
1765         if (!buf)
1766 @@ -835,18 +844,15 @@ static int ssb_pci_sprom_get(struct ssb_
1767                          * available for this device in some other storage */
1768                         err = ssb_fill_sprom_with_fallback(bus, sprom);
1769                         if (err) {
1770 -                               ssb_printk(KERN_WARNING PFX "WARNING: Using"
1771 -                                          " fallback SPROM failed (err %d)\n",
1772 -                                          err);
1773 +                               ssb_warn("WARNING: Using fallback SPROM failed (err %d)\n",
1774 +                                        err);
1775                         } else {
1776 -                               ssb_dprintk(KERN_DEBUG PFX "Using SPROM"
1777 -                                           " revision %d provided by"
1778 -                                           " platform.\n", sprom->revision);
1779 +                               ssb_dbg("Using SPROM revision %d provided by platform\n",
1780 +                                       sprom->revision);
1781                                 err = 0;
1782                                 goto out_free;
1783                         }
1784 -                       ssb_printk(KERN_WARNING PFX "WARNING: Invalid"
1785 -                                  " SPROM CRC (corrupt SPROM)\n");
1786 +                       ssb_warn("WARNING: Invalid SPROM CRC (corrupt SPROM)\n");
1787                 }
1788         }
1789         err = sprom_extract(bus, sprom, buf, bus->sprom_size);
1790 --- a/drivers/ssb/pcihost_wrapper.c
1791 +++ b/drivers/ssb/pcihost_wrapper.c
1792 @@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
1793         struct ssb_bus *ssb = pci_get_drvdata(dev);
1794         int err;
1795  
1796 -       pci_set_power_state(dev, 0);
1797 +       pci_set_power_state(dev, PCI_D0);
1798         err = pci_enable_device(dev);
1799         if (err)
1800                 return err;
1801 --- a/drivers/ssb/pcmcia.c
1802 +++ b/drivers/ssb/pcmcia.c
1803 @@ -143,7 +143,7 @@ int ssb_pcmcia_switch_coreidx(struct ssb
1804  
1805         return 0;
1806  error:
1807 -       ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx);
1808 +       ssb_err("Failed to switch to core %u\n", coreidx);
1809         return err;
1810  }
1811  
1812 @@ -153,10 +153,9 @@ int ssb_pcmcia_switch_core(struct ssb_bu
1813         int err;
1814  
1815  #if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
1816 -       ssb_printk(KERN_INFO PFX
1817 -                  "Switching to %s core, index %d\n",
1818 -                  ssb_core_name(dev->id.coreid),
1819 -                  dev->core_index);
1820 +       ssb_info("Switching to %s core, index %d\n",
1821 +                ssb_core_name(dev->id.coreid),
1822 +                dev->core_index);
1823  #endif
1824  
1825         err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
1826 @@ -192,7 +191,7 @@ int ssb_pcmcia_switch_segment(struct ssb
1827  
1828         return 0;
1829  error:
1830 -       ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n");
1831 +       ssb_err("Failed to switch pcmcia segment\n");
1832         return err;
1833  }
1834  
1835 @@ -549,44 +548,39 @@ static int ssb_pcmcia_sprom_write_all(st
1836         bool failed = 0;
1837         size_t size = SSB_PCMCIA_SPROM_SIZE;
1838  
1839 -       ssb_printk(KERN_NOTICE PFX
1840 -                  "Writing SPROM. Do NOT turn off the power! "
1841 -                  "Please stand by...\n");
1842 +       ssb_notice("Writing SPROM. Do NOT turn off the power! Please stand by...\n");
1843         err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEEN);
1844         if (err) {
1845 -               ssb_printk(KERN_NOTICE PFX
1846 -                          "Could not enable SPROM write access.\n");
1847 +               ssb_notice("Could not enable SPROM write access\n");
1848                 return -EBUSY;
1849         }
1850 -       ssb_printk(KERN_NOTICE PFX "[ 0%%");
1851 +       ssb_notice("[ 0%%");
1852         msleep(500);
1853         for (i = 0; i < size; i++) {
1854                 if (i == size / 4)
1855 -                       ssb_printk("25%%");
1856 +                       ssb_cont("25%%");
1857                 else if (i == size / 2)
1858 -                       ssb_printk("50%%");
1859 +                       ssb_cont("50%%");
1860                 else if (i == (size * 3) / 4)
1861 -                       ssb_printk("75%%");
1862 +                       ssb_cont("75%%");
1863                 else if (i % 2)
1864 -                       ssb_printk(".");
1865 +                       ssb_cont(".");
1866                 err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
1867                 if (err) {
1868 -                       ssb_printk(KERN_NOTICE PFX
1869 -                                  "Failed to write to SPROM.\n");
1870 +                       ssb_notice("Failed to write to SPROM\n");
1871                         failed = 1;
1872                         break;
1873                 }
1874         }
1875         err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
1876         if (err) {
1877 -               ssb_printk(KERN_NOTICE PFX
1878 -                          "Could not disable SPROM write access.\n");
1879 +               ssb_notice("Could not disable SPROM write access\n");
1880                 failed = 1;
1881         }
1882         msleep(500);
1883         if (!failed) {
1884 -               ssb_printk("100%% ]\n");
1885 -               ssb_printk(KERN_NOTICE PFX "SPROM written.\n");
1886 +               ssb_cont("100%% ]\n");
1887 +               ssb_notice("SPROM written\n");
1888         }
1889  
1890         return failed ? -EBUSY : 0;
1891 @@ -700,7 +694,7 @@ static int ssb_pcmcia_do_get_invariants(
1892         return -ENOSPC; /* continue with next entry */
1893  
1894  error:
1895 -       ssb_printk(KERN_ERR PFX
1896 +       ssb_err(
1897                    "PCMCIA: Failed to fetch device invariants: %s\n",
1898                    error_description);
1899         return -ENODEV;
1900 @@ -722,7 +716,7 @@ int ssb_pcmcia_get_invariants(struct ssb
1901         res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE,
1902                                 ssb_pcmcia_get_mac, sprom);
1903         if (res != 0) {
1904 -               ssb_printk(KERN_ERR PFX
1905 +               ssb_err(
1906                         "PCMCIA: Failed to fetch MAC address\n");
1907                 return -ENODEV;
1908         }
1909 @@ -733,7 +727,7 @@ int ssb_pcmcia_get_invariants(struct ssb
1910         if ((res == 0) || (res == -ENOSPC))
1911                 return 0;
1912  
1913 -       ssb_printk(KERN_ERR PFX
1914 +       ssb_err(
1915                         "PCMCIA: Failed to fetch device invariants\n");
1916         return -ENODEV;
1917  }
1918 @@ -843,6 +837,6 @@ int ssb_pcmcia_init(struct ssb_bus *bus)
1919  
1920         return 0;
1921  error:
1922 -       ssb_printk(KERN_ERR PFX "Failed to initialize PCMCIA host device\n");
1923 +       ssb_err("Failed to initialize PCMCIA host device\n");
1924         return err;
1925  }
1926 --- a/drivers/ssb/scan.c
1927 +++ b/drivers/ssb/scan.c
1928 @@ -125,8 +125,7 @@ static u16 pcidev_to_chipid(struct pci_d
1929                 chipid_fallback = 0x4401;
1930                 break;
1931         default:
1932 -               ssb_printk(KERN_ERR PFX
1933 -                          "PCI-ID not in fallback list\n");
1934 +               ssb_err("PCI-ID not in fallback list\n");
1935         }
1936  
1937         return chipid_fallback;
1938 @@ -152,8 +151,7 @@ static u8 chipid_to_nrcores(u16 chipid)
1939         case 0x4704:
1940                 return 9;
1941         default:
1942 -               ssb_printk(KERN_ERR PFX
1943 -                          "CHIPID not in nrcores fallback list\n");
1944 +               ssb_err("CHIPID not in nrcores fallback list\n");
1945         }
1946  
1947         return 1;
1948 @@ -320,15 +318,13 @@ int ssb_bus_scan(struct ssb_bus *bus,
1949                         bus->chip_package = 0;
1950                 }
1951         }
1952 -       ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
1953 -                  "package 0x%02X\n", bus->chip_id, bus->chip_rev,
1954 -                  bus->chip_package);
1955 +       ssb_info("Found chip with id 0x%04X, rev 0x%02X and package 0x%02X\n",
1956 +                bus->chip_id, bus->chip_rev, bus->chip_package);
1957         if (!bus->nr_devices)
1958                 bus->nr_devices = chipid_to_nrcores(bus->chip_id);
1959         if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
1960 -               ssb_printk(KERN_ERR PFX
1961 -                          "More than %d ssb cores found (%d)\n",
1962 -                          SSB_MAX_NR_CORES, bus->nr_devices);
1963 +               ssb_err("More than %d ssb cores found (%d)\n",
1964 +                       SSB_MAX_NR_CORES, bus->nr_devices);
1965                 goto err_unmap;
1966         }
1967         if (bus->bustype == SSB_BUSTYPE_SSB) {
1968 @@ -370,8 +366,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1969                         nr_80211_cores++;
1970                         if (nr_80211_cores > 1) {
1971                                 if (!we_support_multiple_80211_cores(bus)) {
1972 -                                       ssb_dprintk(KERN_INFO PFX "Ignoring additional "
1973 -                                                   "802.11 core\n");
1974 +                                       ssb_dbg("Ignoring additional 802.11 core\n");
1975                                         continue;
1976                                 }
1977                         }
1978 @@ -379,8 +374,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1979                 case SSB_DEV_EXTIF:
1980  #ifdef CONFIG_SSB_DRIVER_EXTIF
1981                         if (bus->extif.dev) {
1982 -                               ssb_printk(KERN_WARNING PFX
1983 -                                          "WARNING: Multiple EXTIFs found\n");
1984 +                               ssb_warn("WARNING: Multiple EXTIFs found\n");
1985                                 break;
1986                         }
1987                         bus->extif.dev = dev;
1988 @@ -388,8 +382,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1989                         break;
1990                 case SSB_DEV_CHIPCOMMON:
1991                         if (bus->chipco.dev) {
1992 -                               ssb_printk(KERN_WARNING PFX
1993 -                                          "WARNING: Multiple ChipCommon found\n");
1994 +                               ssb_warn("WARNING: Multiple ChipCommon found\n");
1995                                 break;
1996                         }
1997                         bus->chipco.dev = dev;
1998 @@ -398,8 +391,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
1999                 case SSB_DEV_MIPS_3302:
2000  #ifdef CONFIG_SSB_DRIVER_MIPS
2001                         if (bus->mipscore.dev) {
2002 -                               ssb_printk(KERN_WARNING PFX
2003 -                                          "WARNING: Multiple MIPS cores found\n");
2004 +                               ssb_warn("WARNING: Multiple MIPS cores found\n");
2005                                 break;
2006                         }
2007                         bus->mipscore.dev = dev;
2008 @@ -420,8 +412,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
2009                                 }
2010                         }
2011                         if (bus->pcicore.dev) {
2012 -                               ssb_printk(KERN_WARNING PFX
2013 -                                          "WARNING: Multiple PCI(E) cores found\n");
2014 +                               ssb_warn("WARNING: Multiple PCI(E) cores found\n");
2015                                 break;
2016                         }
2017                         bus->pcicore.dev = dev;
2018 --- a/drivers/ssb/sprom.c
2019 +++ b/drivers/ssb/sprom.c
2020 @@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
2021         while (cnt < sprom_size_words) {
2022                 memcpy(tmp, dump, 4);
2023                 dump += 4;
2024 -               err = strict_strtoul(tmp, 16, &parsed);
2025 +               err = kstrtoul(tmp, 16, &parsed);
2026                 if (err)
2027                         return err;
2028                 sprom[cnt++] = swab16((u16)parsed);
2029 @@ -127,13 +127,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_
2030                 goto out_kfree;
2031         err = ssb_devices_freeze(bus, &freeze);
2032         if (err) {
2033 -               ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
2034 +               ssb_err("SPROM write: Could not freeze all devices\n");
2035                 goto out_unlock;
2036         }
2037         res = sprom_write(bus, sprom);
2038         err = ssb_devices_thaw(&freeze);
2039         if (err)
2040 -               ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n");
2041 +               ssb_err("SPROM write: Could not thaw all devices\n");
2042  out_unlock:
2043         mutex_unlock(&bus->sprom_mutex);
2044  out_kfree:
2045 --- a/drivers/ssb/ssb_private.h
2046 +++ b/drivers/ssb/ssb_private.h
2047 @@ -3,21 +3,33 @@
2048  
2049  #include <linux/ssb/ssb.h>
2050  #include <linux/types.h>
2051 +#include <linux/bcm47xx_wdt.h>
2052  
2053  
2054  #define PFX    "ssb: "
2055  
2056  #ifdef CONFIG_SSB_SILENT
2057 -# define ssb_printk(fmt, x...) do { /* nothing */ } while (0)
2058 +# define ssb_printk(fmt, ...)                                  \
2059 +       do { if (0) printk(fmt, ##__VA_ARGS__); } while (0)
2060  #else
2061 -# define ssb_printk            printk
2062 +# define ssb_printk(fmt, ...)                                  \
2063 +       printk(fmt, ##__VA_ARGS__)
2064  #endif /* CONFIG_SSB_SILENT */
2065  
2066 +#define ssb_emerg(fmt, ...)    ssb_printk(KERN_EMERG PFX fmt, ##__VA_ARGS__)
2067 +#define ssb_err(fmt, ...)      ssb_printk(KERN_ERR PFX fmt, ##__VA_ARGS__)
2068 +#define ssb_warn(fmt, ...)     ssb_printk(KERN_WARNING PFX fmt, ##__VA_ARGS__)
2069 +#define ssb_notice(fmt, ...)   ssb_printk(KERN_NOTICE PFX fmt, ##__VA_ARGS__)
2070 +#define ssb_info(fmt, ...)     ssb_printk(KERN_INFO PFX fmt, ##__VA_ARGS__)
2071 +#define ssb_cont(fmt, ...)     ssb_printk(KERN_CONT fmt, ##__VA_ARGS__)
2072 +
2073  /* dprintk: Debugging printk; vanishes for non-debug compilation */
2074  #ifdef CONFIG_SSB_DEBUG
2075 -# define ssb_dprintk(fmt, x...)        ssb_printk(fmt , ##x)
2076 +# define ssb_dbg(fmt, ...)                                     \
2077 +       ssb_printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__)
2078  #else
2079 -# define ssb_dprintk(fmt, x...)        do { /* nothing */ } while (0)
2080 +# define ssb_dbg(fmt, ...)                                     \
2081 +       do { if (0) printk(KERN_DEBUG PFX fmt, ##__VA_ARGS__); } while (0)
2082  #endif
2083  
2084  #ifdef CONFIG_SSB_DEBUG
2085 @@ -210,5 +222,76 @@ static inline void b43_pci_ssb_bridge_ex
2086  /* driver_chipcommon_pmu.c */
2087  extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
2088  extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
2089 +extern u32 ssb_pmu_get_alp_clock(struct ssb_chipcommon *cc);
2090 +
2091 +extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
2092 +                                            u32 ticks);
2093 +extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
2094 +
2095 +/* driver_chipcommon_sflash.c */
2096 +#ifdef CONFIG_SSB_SFLASH
2097 +int ssb_sflash_init(struct ssb_chipcommon *cc);
2098 +#else
2099 +static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
2100 +{
2101 +       pr_err("Serial flash not supported\n");
2102 +       return 0;
2103 +}
2104 +#endif /* CONFIG_SSB_SFLASH */
2105 +
2106 +#ifdef CONFIG_SSB_DRIVER_MIPS
2107 +extern struct platform_device ssb_pflash_dev;
2108 +#endif
2109 +
2110 +#ifdef CONFIG_SSB_SFLASH
2111 +extern struct platform_device ssb_sflash_dev;
2112 +#endif
2113 +
2114 +#ifdef CONFIG_SSB_DRIVER_EXTIF
2115 +extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks);
2116 +extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms);
2117 +#else
2118 +static inline u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
2119 +                                                  u32 ticks)
2120 +{
2121 +       return 0;
2122 +}
2123 +static inline u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt,
2124 +                                                 u32 ms)
2125 +{
2126 +       return 0;
2127 +}
2128 +#endif
2129 +
2130 +#ifdef CONFIG_SSB_EMBEDDED
2131 +extern int ssb_watchdog_register(struct ssb_bus *bus);
2132 +#else /* CONFIG_SSB_EMBEDDED */
2133 +static inline int ssb_watchdog_register(struct ssb_bus *bus)
2134 +{
2135 +       return 0;
2136 +}
2137 +#endif /* CONFIG_SSB_EMBEDDED */
2138 +
2139 +#ifdef CONFIG_SSB_DRIVER_EXTIF
2140 +extern void ssb_extif_init(struct ssb_extif *extif);
2141 +#else
2142 +static inline void ssb_extif_init(struct ssb_extif *extif)
2143 +{
2144 +}
2145 +#endif
2146 +
2147 +#ifdef CONFIG_SSB_DRIVER_GPIO
2148 +extern int ssb_gpio_init(struct ssb_bus *bus);
2149 +extern int ssb_gpio_unregister(struct ssb_bus *bus);
2150 +#else /* CONFIG_SSB_DRIVER_GPIO */
2151 +static inline int ssb_gpio_init(struct ssb_bus *bus)
2152 +{
2153 +       return -ENOTSUPP;
2154 +}
2155 +static inline int ssb_gpio_unregister(struct ssb_bus *bus)
2156 +{
2157 +       return 0;
2158 +}
2159 +#endif /* CONFIG_SSB_DRIVER_GPIO */
2160  
2161  #endif /* LINUX_SSB_PRIVATE_H_ */
2162 --- a/include/linux/ssb/ssb.h
2163 +++ b/include/linux/ssb/ssb.h
2164 @@ -6,8 +6,10 @@
2165  #include <linux/types.h>
2166  #include <linux/spinlock.h>
2167  #include <linux/pci.h>
2168 +#include <linux/gpio.h>
2169  #include <linux/mod_devicetable.h>
2170  #include <linux/dma-mapping.h>
2171 +#include <linux/platform_device.h>
2172  
2173  #include <linux/ssb/ssb_regs.h>
2174  
2175 @@ -24,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
2176  
2177  struct ssb_sprom {
2178         u8 revision;
2179 -       u8 il0mac[6];           /* MAC address for 802.11b/g */
2180 -       u8 et0mac[6];           /* MAC address for Ethernet */
2181 -       u8 et1mac[6];           /* MAC address for 802.11a */
2182 +       u8 il0mac[6] __aligned(sizeof(u16));    /* MAC address for 802.11b/g */
2183 +       u8 et0mac[6] __aligned(sizeof(u16));    /* MAC address for Ethernet */
2184 +       u8 et1mac[6] __aligned(sizeof(u16));    /* MAC address for 802.11a */
2185         u8 et0phyaddr;          /* MII address for enet0 */
2186         u8 et1phyaddr;          /* MII address for enet1 */
2187         u8 et0mdcport;          /* MDIO for enet0 */
2188 @@ -338,13 +340,61 @@ enum ssb_bustype {
2189  #define SSB_BOARDVENDOR_DELL   0x1028  /* Dell */
2190  #define SSB_BOARDVENDOR_HP     0x0E11  /* HP */
2191  /* board_type */
2192 +#define SSB_BOARD_BCM94301CB   0x0406
2193 +#define SSB_BOARD_BCM94301MP   0x0407
2194 +#define SSB_BOARD_BU4309       0x040A
2195 +#define SSB_BOARD_BCM94309CB   0x040B
2196 +#define SSB_BOARD_BCM4309MP    0x040C
2197 +#define SSB_BOARD_BU4306       0x0416
2198  #define SSB_BOARD_BCM94306MP   0x0418
2199  #define SSB_BOARD_BCM4309G     0x0421
2200  #define SSB_BOARD_BCM4306CB    0x0417
2201 -#define SSB_BOARD_BCM4309MP    0x040C
2202 +#define SSB_BOARD_BCM94306PC   0x0425  /* pcmcia 3.3v 4306 card */
2203 +#define SSB_BOARD_BCM94306CBSG 0x042B  /* with SiGe PA */
2204 +#define SSB_BOARD_PCSG94306    0x042D  /* with SiGe PA */
2205 +#define SSB_BOARD_BU4704SD     0x042E  /* with sdram */
2206 +#define SSB_BOARD_BCM94704AGR  0x042F  /* dual 11a/11g Router */
2207 +#define SSB_BOARD_BCM94308MP   0x0430  /* 11a-only minipci */
2208 +#define SSB_BOARD_BU4318       0x0447
2209 +#define SSB_BOARD_CB4318       0x0448
2210 +#define SSB_BOARD_MPG4318      0x0449
2211  #define SSB_BOARD_MP4318       0x044A
2212 -#define SSB_BOARD_BU4306       0x0416
2213 -#define SSB_BOARD_BU4309       0x040A
2214 +#define SSB_BOARD_SD4318       0x044B
2215 +#define SSB_BOARD_BCM94306P    0x044C  /* with SiGe */
2216 +#define SSB_BOARD_BCM94303MP   0x044E
2217 +#define SSB_BOARD_BCM94306MPM  0x0450
2218 +#define SSB_BOARD_BCM94306MPL  0x0453
2219 +#define SSB_BOARD_PC4303       0x0454  /* pcmcia */
2220 +#define SSB_BOARD_BCM94306MPLNA        0x0457
2221 +#define SSB_BOARD_BCM94306MPH  0x045B
2222 +#define SSB_BOARD_BCM94306PCIV 0x045C
2223 +#define SSB_BOARD_BCM94318MPGH 0x0463
2224 +#define SSB_BOARD_BU4311       0x0464
2225 +#define SSB_BOARD_BCM94311MC   0x0465
2226 +#define SSB_BOARD_BCM94311MCAG 0x0466
2227 +/* 4321 boards */
2228 +#define SSB_BOARD_BU4321       0x046B
2229 +#define SSB_BOARD_BU4321E      0x047C
2230 +#define SSB_BOARD_MP4321       0x046C
2231 +#define SSB_BOARD_CB2_4321     0x046D
2232 +#define SSB_BOARD_CB2_4321_AG  0x0066
2233 +#define SSB_BOARD_MC4321       0x046E
2234 +/* 4325 boards */
2235 +#define SSB_BOARD_BCM94325DEVBU        0x0490
2236 +#define SSB_BOARD_BCM94325BGABU        0x0491
2237 +#define SSB_BOARD_BCM94325SDGWB        0x0492
2238 +#define SSB_BOARD_BCM94325SDGMDL       0x04AA
2239 +#define SSB_BOARD_BCM94325SDGMDL2      0x04C6
2240 +#define SSB_BOARD_BCM94325SDGMDL3      0x04C9
2241 +#define SSB_BOARD_BCM94325SDABGWBA     0x04E1
2242 +/* 4322 boards */
2243 +#define SSB_BOARD_BCM94322MC   0x04A4
2244 +#define SSB_BOARD_BCM94322USB  0x04A8  /* dualband */
2245 +#define SSB_BOARD_BCM94322HM   0x04B0
2246 +#define SSB_BOARD_BCM94322USB2D        0x04Bf  /* single band discrete front end */
2247 +/* 4312 boards */
2248 +#define SSB_BOARD_BU4312       0x048A
2249 +#define SSB_BOARD_BCM4312MCGSG 0x04B5
2250  /* chip_package */
2251  #define SSB_CHIPPACK_BCM4712S  1       /* Small 200pin 4712 */
2252  #define SSB_CHIPPACK_BCM4712M  2       /* Medium 225pin 4712 */
2253 @@ -432,7 +482,11 @@ struct ssb_bus {
2254  #ifdef CONFIG_SSB_EMBEDDED
2255         /* Lock for GPIO register access. */
2256         spinlock_t gpio_lock;
2257 +       struct platform_device *watchdog;
2258  #endif /* EMBEDDED */
2259 +#ifdef CONFIG_SSB_DRIVER_GPIO
2260 +       struct gpio_chip gpio;
2261 +#endif /* DRIVER_GPIO */
2262  
2263         /* Internal-only stuff follows. Do not touch. */
2264         struct list_head list;
2265 --- a/include/linux/ssb/ssb_driver_chipcommon.h
2266 +++ b/include/linux/ssb/ssb_driver_chipcommon.h
2267 @@ -219,6 +219,7 @@
2268  #define SSB_CHIPCO_PMU_CTL                     0x0600 /* PMU control */
2269  #define  SSB_CHIPCO_PMU_CTL_ILP_DIV            0xFFFF0000 /* ILP div mask */
2270  #define  SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT      16
2271 +#define  SSB_CHIPCO_PMU_CTL_PLL_UPD            0x00000400
2272  #define  SSB_CHIPCO_PMU_CTL_NOILPONW           0x00000200 /* No ILP on wait */
2273  #define  SSB_CHIPCO_PMU_CTL_HTREQEN            0x00000100 /* HT req enable */
2274  #define  SSB_CHIPCO_PMU_CTL_ALPREQEN           0x00000080 /* ALP req enable */
2275 @@ -504,7 +505,9 @@
2276  #define SSB_CHIPCO_FLASHCTL_ST_SE      0x02D8          /* Sector Erase */
2277  #define SSB_CHIPCO_FLASHCTL_ST_BE      0x00C7          /* Bulk Erase */
2278  #define SSB_CHIPCO_FLASHCTL_ST_DP      0x00B9          /* Deep Power-down */
2279 -#define SSB_CHIPCO_FLASHCTL_ST_RSIG    0x03AB          /* Read Electronic Signature */
2280 +#define SSB_CHIPCO_FLASHCTL_ST_RES     0x03AB          /* Read Electronic Signature */
2281 +#define SSB_CHIPCO_FLASHCTL_ST_CSA     0x1000          /* Keep chip select asserted */
2282 +#define SSB_CHIPCO_FLASHCTL_ST_SSE     0x0220          /* Sub-sector Erase */
2283  
2284  /* Status register bits for ST flashes */
2285  #define SSB_CHIPCO_FLASHSTA_ST_WIP     0x01            /* Write In Progress */
2286 @@ -588,7 +591,10 @@ struct ssb_chipcommon {
2287         u32 status;
2288         /* Fast Powerup Delay constant */
2289         u16 fast_pwrup_delay;
2290 +       spinlock_t gpio_lock;
2291         struct ssb_chipcommon_pmu pmu;
2292 +       u32 ticks_per_ms;
2293 +       u32 max_timer_ms;
2294  };
2295  
2296  static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
2297 @@ -628,8 +634,7 @@ enum ssb_clkmode {
2298  extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
2299                                      enum ssb_clkmode mode);
2300  
2301 -extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc,
2302 -                                         u32 ticks);
2303 +extern u32 ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks);
2304  
2305  void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value);
2306  
2307 @@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi
2308  u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value);
2309  u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value);
2310  u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value);
2311 +u32 ssb_chipco_gpio_pullup(struct ssb_chipcommon *cc, u32 mask, u32 value);
2312 +u32 ssb_chipco_gpio_pulldown(struct ssb_chipcommon *cc, u32 mask, u32 value);
2313  
2314  #ifdef CONFIG_SSB_SERIAL
2315  extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
2316 @@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
2317  void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
2318                              enum ssb_pmu_ldo_volt_id id, u32 voltage);
2319  void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
2320 +void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
2321  
2322  #endif /* LINUX_SSB_CHIPCO_H_ */
2323 --- a/include/linux/ssb/ssb_driver_extif.h
2324 +++ b/include/linux/ssb/ssb_driver_extif.h
2325 @@ -152,12 +152,16 @@
2326  /* watchdog */
2327  #define SSB_EXTIF_WATCHDOG_CLK         48000000        /* Hz */
2328  
2329 +#define SSB_EXTIF_WATCHDOG_MAX_TIMER   ((1 << 28) - 1)
2330 +#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS        (SSB_EXTIF_WATCHDOG_MAX_TIMER \
2331 +                                        / (SSB_EXTIF_WATCHDOG_CLK / 1000))
2332  
2333  
2334  #ifdef CONFIG_SSB_DRIVER_EXTIF
2335  
2336  struct ssb_extif {
2337         struct ssb_device *dev;
2338 +       spinlock_t gpio_lock;
2339  };
2340  
2341  static inline bool ssb_extif_available(struct ssb_extif *extif)
2342 @@ -171,8 +175,7 @@ extern void ssb_extif_get_clockcontrol(s
2343  extern void ssb_extif_timing_init(struct ssb_extif *extif,
2344                                   unsigned long ns);
2345  
2346 -extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
2347 -                                        u32 ticks);
2348 +extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks);
2349  
2350  /* Extif GPIO pin access */
2351  u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
2352 @@ -205,10 +208,52 @@ void ssb_extif_get_clockcontrol(struct s
2353  }
2354  
2355  static inline
2356 -void ssb_extif_watchdog_timer_set(struct ssb_extif *extif,
2357 -                                 u32 ticks)
2358 +void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
2359  {
2360  }
2361  
2362 +static inline
2363 +u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
2364 +{
2365 +       return 0;
2366 +}
2367 +
2368 +static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
2369 +{
2370 +       return 0;
2371 +}
2372 +
2373 +static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask,
2374 +                                    u32 value)
2375 +{
2376 +       return 0;
2377 +}
2378 +
2379 +static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask,
2380 +                                      u32 value)
2381 +{
2382 +       return 0;
2383 +}
2384 +
2385 +static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask,
2386 +                                         u32 value)
2387 +{
2388 +       return 0;
2389 +}
2390 +
2391 +static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask,
2392 +                                        u32 value)
2393 +{
2394 +       return 0;
2395 +}
2396 +
2397 +#ifdef CONFIG_SSB_SERIAL
2398 +static inline int ssb_extif_serial_init(struct ssb_extif *extif,
2399 +                                       struct ssb_serial_port *ports)
2400 +{
2401 +       return 0;
2402 +}
2403 +#endif /* CONFIG_SSB_SERIAL */
2404 +
2405  #endif /* CONFIG_SSB_DRIVER_EXTIF */
2406  #endif /* LINUX_SSB_EXTIFCORE_H_ */
2407 --- a/include/linux/ssb/ssb_driver_gige.h
2408 +++ b/include/linux/ssb/ssb_driver_gige.h
2409 @@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
2410         return 0;
2411  }
2412  
2413 -#ifdef CONFIG_BCM47XX
2414 -#include <asm/mach-bcm47xx/nvram.h>
2415  /* Get the device MAC address */
2416 -static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
2417 -{
2418 -       char buf[20];
2419 -       if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
2420 -               return;
2421 -       nvram_parse_macaddr(buf, macaddr);
2422 -}
2423 -#else
2424 -static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
2425 +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
2426  {
2427 +       struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
2428 +       if (!dev)
2429 +               return -ENODEV;
2430 +
2431 +       memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
2432 +       return 0;
2433  }
2434 -#endif
2435  
2436  extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
2437                                           struct pci_dev *pdev);
2438 @@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
2439  {
2440         return 0;
2441  }
2442 +static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
2443 +{
2444 +       return -ENODEV;
2445 +}
2446  
2447  #endif /* CONFIG_SSB_DRIVER_GIGE */
2448  #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
2449 --- a/include/linux/ssb/ssb_driver_mips.h
2450 +++ b/include/linux/ssb/ssb_driver_mips.h
2451 @@ -13,6 +13,24 @@ struct ssb_serial_port {
2452         unsigned int reg_shift;
2453  };
2454  
2455 +struct ssb_pflash {
2456 +       bool present;
2457 +       u8 buswidth;
2458 +       u32 window;
2459 +       u32 window_size;
2460 +};
2461 +
2462 +#ifdef CONFIG_SSB_SFLASH
2463 +struct ssb_sflash {
2464 +       bool present;
2465 +       u32 window;
2466 +       u32 blocksize;
2467 +       u16 numblocks;
2468 +       u32 size;
2469 +
2470 +       void *priv;
2471 +};
2472 +#endif
2473  
2474  struct ssb_mipscore {
2475         struct ssb_device *dev;
2476 @@ -20,9 +38,10 @@ struct ssb_mipscore {
2477         int nr_serial_ports;
2478         struct ssb_serial_port serial_ports[4];
2479  
2480 -       u8 flash_buswidth;
2481 -       u32 flash_window;
2482 -       u32 flash_window_size;
2483 +       struct ssb_pflash pflash;
2484 +#ifdef CONFIG_SSB_SFLASH
2485 +       struct ssb_sflash sflash;
2486 +#endif
2487  };
2488  
2489  extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
2490 @@ -41,6 +60,11 @@ void ssb_mipscore_init(struct ssb_mipsco
2491  {
2492  }
2493  
2494 +static inline unsigned int ssb_mips_irq(struct ssb_device *dev)
2495 +{
2496 +       return 0;
2497 +}
2498 +
2499  #endif /* CONFIG_SSB_DRIVER_MIPS */
2500  
2501  #endif /* LINUX_SSB_MIPSCORE_H_ */
2502 --- a/include/linux/ssb/ssb_regs.h
2503 +++ b/include/linux/ssb/ssb_regs.h
2504 @@ -172,6 +172,7 @@
2505  #define SSB_SPROMSIZE_WORDS_R4         220
2506  #define SSB_SPROMSIZE_BYTES_R123       (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
2507  #define SSB_SPROMSIZE_BYTES_R4         (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
2508 +#define SSB_SPROMSIZE_WORDS_R10                230
2509  #define SSB_SPROM_BASE1                        0x1000
2510  #define SSB_SPROM_BASE31               0x0800
2511  #define SSB_SPROM_REVISION             0x007E
2512 @@ -289,11 +290,11 @@
2513  #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT  5
2514  #define  SSB_SPROM4_ETHPHY_ET0M                (1<<14) /* MDIO for enet0 */
2515  #define  SSB_SPROM4_ETHPHY_ET1M                (1<<15) /* MDIO for enet1 */
2516 -#define SSB_SPROM4_ANTAVAIL            0x005D  /* Antenna available bitfields */
2517 -#define  SSB_SPROM4_ANTAVAIL_A         0x00FF  /* A-PHY bitfield */
2518 -#define  SSB_SPROM4_ANTAVAIL_A_SHIFT   0
2519 -#define  SSB_SPROM4_ANTAVAIL_BG                0xFF00  /* B-PHY and G-PHY bitfield */
2520 -#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT  8
2521 +#define SSB_SPROM4_ANTAVAIL            0x005C  /* Antenna available bitfields */
2522 +#define  SSB_SPROM4_ANTAVAIL_BG                0x00FF  /* B-PHY and G-PHY bitfield */
2523 +#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT  0
2524 +#define  SSB_SPROM4_ANTAVAIL_A         0xFF00  /* A-PHY bitfield */
2525 +#define  SSB_SPROM4_ANTAVAIL_A_SHIFT   8
2526  #define SSB_SPROM4_AGAIN01             0x005E  /* Antenna Gain (in dBm Q5.2) */
2527  #define  SSB_SPROM4_AGAIN0             0x00FF  /* Antenna 0 */
2528  #define  SSB_SPROM4_AGAIN0_SHIFT       0
2529 @@ -485,7 +486,7 @@
2530  #define  SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4
2531  #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL        0x0020
2532  #define  SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT  5
2533 -#define SSB_SPROM8_TEMPDELTA           0x00BA
2534 +#define SSB_SPROM8_TEMPDELTA           0x00BC
2535  #define  SSB_SPROM8_TEMPDELTA_PHYCAL   0x00ff
2536  #define  SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT     0
2537  #define  SSB_SPROM8_TEMPDELTA_PERIOD   0x0f00
2538 --- /dev/null
2539 +++ b/include/linux/bcm47xx_wdt.h
2540 @@ -0,0 +1,19 @@
2541 +#ifndef LINUX_BCM47XX_WDT_H_
2542 +#define LINUX_BCM47XX_WDT_H_
2543 +
2544 +#include <linux/types.h>
2545 +
2546 +
2547 +struct bcm47xx_wdt {
2548 +       u32 (*timer_set)(struct bcm47xx_wdt *, u32);
2549 +       u32 (*timer_set_ms)(struct bcm47xx_wdt *, u32);
2550 +       u32 max_timer_ms;
2551 +
2552 +       void *driver_data;
2553 +};
2554 +
2555 +static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
2556 +{
2557 +       return wdt->driver_data;
2558 +}
2559 +#endif /* LINUX_BCM47XX_WDT_H_ */
2560 --- a/drivers/net/wireless/b43/phy_n.c
2561 +++ b/drivers/net/wireless/b43/phy_n.c
2562 @@ -4583,7 +4583,8 @@ static void b43_nphy_pmu_spur_avoid(stru
2563  #endif
2564  #ifdef CONFIG_B43_SSB
2565         case B43_BUS_SSB:
2566 -               /* FIXME */
2567 +               ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
2568 +                                           avoid);
2569                 break;
2570  #endif
2571         }