target/linux/gemini/patches-3.10/121-arm-gemini-register-ethernet.patch

   1 --- a/arch/arm/mach-gemini/board-nas4220b.c             2011-04-21 13:19:09.878432930 +0200
   2 +++ b/arch/arm/mach-gemini/board-nas4220b.c             2011-04-21 13:30:37.555082365 +0200
   3 @@ -28,9 +28,27 @@
   4
   5  #include <mach/hardware.h>
   6  #include <mach/global_reg.h>
   7 +#include <mach/gmac.h>
   8
   9  #include "common.h"
  10
  11 +static struct mdio_gpio_platform_data ib4220b_mdio = {
  12 +       .mdc            = 22,
  13 +       .mdio           = 21,
  14 +       .phy_mask       = ~(1 << 1),
  15 +};
  16 +
  17 +static struct platform_device ib4220b_phy_device = {
  18 +       .name   = "mdio-gpio",
  19 +       .id     = 0,
  20 +       .dev    = { .platform_data = &ib4220b_mdio, },
  21 +};
  22 +
  23 +static struct gemini_gmac_platform_data ib4220b_gmac_data = {
  24 +       .bus_id[0]      = "gpio-0:01",
  25 +       .interface[0]   = PHY_INTERFACE_MODE_RGMII,
  26 +};
  27 +
  28  static struct gpio_led ib4220b_leds[] = {
  29         {
  30                 .name                   = "nas4220b:orange:hdd",
  31 @@ -107,9 +125,39 @@
  32         },
  33  };
  34
  35 +static void __init ib4220b_gmac_init(void)
  36 +{
  37 +       unsigned int val;
  38 +
  39 +       val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  40 +               GLOBAL_IO_DRIVING_CTRL));
  41 +       val |= (0x3 << GMAC0_PADS_SHIFT) | (0x3 << GMAC1_PADS_SHIFT);
  42 +       writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  43 +               GLOBAL_IO_DRIVING_CTRL));
  44 +
  45 +       val = (0x0 << GMAC0_RXDV_SKEW_SHIFT) | (0xf << GMAC0_RXC_SKEW_SHIFT) |
  46 +               (0x7 << GMAC0_TXEN_SKEW_SHIFT) | (0xb << GMAC0_TXC_SKEW_SHIFT) |
  47 +               (0x0 << GMAC1_RXDV_SKEW_SHIFT) | (0xf << GMAC1_RXC_SKEW_SHIFT) |
  48 +               (0x7 << GMAC1_TXEN_SKEW_SHIFT) | (0xa << GMAC1_TXC_SKEW_SHIFT);
  49 +       writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  50 +               GLOBAL_GMAC_CTRL_SKEW_CTRL));
  51 +
  52 +       writel(0x77777777, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  53 +               GLOBAL_GMAC0_DATA_SKEW_CTRL));
  54 +       writel(0x77777777, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  55 +               GLOBAL_GMAC1_DATA_SKEW_CTRL));
  56 +
  57 +       val = readl((void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  58 +               GLOBAL_ARBITRATION1_CTRL)) & ~BURST_LENGTH_MASK;
  59 +       val |= (0x20 << BURST_LENGTH_SHIFT) | GMAC0_HIGH_PRIO | GMAC1_HIGH_PRIO;
  60 +       writel(val, (void __iomem*)(IO_ADDRESS(GEMINI_GLOBAL_BASE) +
  61 +               GLOBAL_ARBITRATION1_CTRL));
  62 +}
  63 +
  64  static void __init ib4220b_init(void)
  65  {
  66         gemini_gpio_init();
  67 +       ib4220b_gmac_init();
  68         platform_register_uart();
  69         platform_register_pflash(SZ_16M, NULL, 0);
  70         platform_device_register(&ib4220b_led_device);
  71 @@ -96,6 +144,8 @@
  72         platform_device_register(&ib4220b_key_device);
  73         platform_register_rtc();
  74         platform_register_watchdog();
  75 +       platform_device_register(&ib4220b_phy_device);
  76 +       platform_register_ethernet(&ib4220b_gmac_data);
  77  }
  78
  79  MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
  80 --- a/arch/arm/mach-gemini/board-wbd111.c
  81 +++ b/arch/arm/mach-gemini/board-wbd111.c
  82 @@ -22,9 +22,29 @@
  83  #include <asm/mach/arch.h>
  84  #include <asm/mach/time.h>
  85
  86 +#include <mach/gmac.h>
  87
  88  #include "common.h"
  89
  90 +static struct mdio_gpio_platform_data wbd111_mdio = {
  91 +       .mdc            = 22,
  92 +       .mdio           = 21,
  93 +       .phy_mask       = ~(1 << 1),
  94 +};
  95 +
  96 +static struct platform_device wbd111_phy_device = {
  97 +       .name   = "mdio-gpio",
  98 +       .id     = 0,
  99 +       .dev    = {
 100 +               .platform_data = &wbd111_mdio,
 101 +       },
 102 +};
 103 +
 104 +static struct gemini_gmac_platform_data gmac_data = {
 105 +       .bus_id[0] = "gpio-0:01",
 106 +       .interface[0] = PHY_INTERFACE_MODE_MII,
 107 +};
 108 +
 109  static struct gpio_keys_button wbd111_keys[] = {
 110         {
 111                 .code           = KEY_SETUP,
 112 @@ -123,6 +143,8 @@ static void __init wbd111_init(void)
 113         platform_device_register(&wbd111_keys_device);
 114         platform_register_rtc();
 115         platform_register_watchdog();
 116 +       platform_device_register(&wbd111_phy_device);
 117 +       platform_register_ethernet(&gmac_data);
 118  }
 119
 120  MACHINE_START(WBD111, "Wiliboard WBD-111")
 121 --- a/arch/arm/mach-gemini/board-wbd222.c
 122 +++ b/arch/arm/mach-gemini/board-wbd222.c
 123 @@ -22,9 +22,31 @@
 124  #include <asm/mach/arch.h>
 125  #include <asm/mach/time.h>
 126
 127 +#include <mach/gmac.h>
 128
 129  #include "common.h"
 130
 131 +static struct mdio_gpio_platform_data wbd222_mdio = {
 132 +       .mdc            = 22,
 133 +       .mdio           = 21,
 134 +       .phy_mask       = ~((1 << 1) | (1 << 3)),
 135 +};
 136 +
 137 +static struct platform_device wbd222_phy_device = {
 138 +       .name   = "mdio-gpio",
 139 +       .id     = 0,
 140 +       .dev    = {
 141 +               .platform_data = &wbd222_mdio,
 142 +       },
 143 +};
 144 +
 145 +static struct gemini_gmac_platform_data gmac_data = {
 146 +       .bus_id[0] = "gpio-0:01",
 147 +       .interface[0] = PHY_INTERFACE_MODE_MII,
 148 +       .bus_id[1] = "gpio-0:03",
 149 +        .interface[1] = PHY_INTERFACE_MODE_MII,
 150 +};
 151 +
 152  static struct gpio_keys_button wbd222_keys[] = {
 153         {
 154                 .code           = KEY_SETUP,
 155 @@ -123,6 +145,8 @@ static void __init wbd222_init(void)
 156         platform_device_register(&wbd222_keys_device);
 157         platform_register_rtc();
 158         platform_register_watchdog();
 159 +       platform_device_register(&wbd222_phy_device);
 160 +       platform_register_ethernet(&gmac_data);
 161  }
 162
 163  MACHINE_START(WBD222, "Wiliboard WBD-222")
 164 --- a/arch/arm/mach-gemini/board-rut1xx.c
 165 +++ b/arch/arm/mach-gemini/board-rut1xx.c
 166 @@ -15,13 +15,35 @@
 167  #include <linux/input.h>
 168  #include <linux/gpio_keys.h>
 169  #include <linux/sizes.h>
 170 +#include <linux/mdio-gpio.h>
 171
 172  #include <asm/mach-types.h>
 173  #include <asm/mach/arch.h>
 174  #include <asm/mach/time.h>
 175
 176 +#include <mach/gmac.h>
 177 +
 178  #include "common.h"
 179
 180 +static struct mdio_gpio_platform_data rut1xx_mdio = {
 181 +       .mdc            = 22,
 182 +       .mdio           = 21,
 183 +       .phy_mask       = ~(1 << 1),
 184 +};
 185 +
 186 +static struct platform_device rut1xx_phy_device = {
 187 +       .name   = "mdio-gpio",
 188 +       .id     = 0,
 189 +       .dev    = {
 190 +               .platform_data = &rut1xx_mdio,
 191 +       },
 192 +};
 193 +
 194 +static struct gemini_gmac_platform_data gmac_data = {
 195 +       .bus_id[0] = "gpio-0:01",
 196 +       .interface[0] = PHY_INTERFACE_MODE_MII,
 197 +};
 198 +
 199  static struct gpio_keys_button rut1xx_keys[] = {
 200         {
 201                 .code           = KEY_SETUP,
 202 @@ -81,6 +103,8 @@ static void __init rut1xx_init(void)
 203         platform_device_register(&rut1xx_keys_device);
 204         platform_register_rtc();
 205         platform_register_watchdog();
 206 +       platform_device_register(&rut1xx_phy_device);
 207 +       platform_register_ethernet(&gmac_data);
 208  }
 209
 210  MACHINE_START(RUT100, "Teltonika RUT100")