bcm63xx: add support for linux 3.8
[openwrt.git] / target / linux / brcm63xx / patches-3.8 / 525-board_96348w3.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -1363,6 +1363,59 @@ static struct board_info __initdata boar
4         },
5  };
6  
7 +/* NetGear DG834G v4 */
8 +static struct board_info __initdata board_96348W3 = {
9 +       .name                           = "96348W3",
10 +       .expected_cpu_id                = 0x6348,
11 +
12 +       .has_uart0                      = 1,
13 +       .has_enet1                      = 1,
14 +       .has_pci                        = 1,
15 +
16 +       .enet1 = {
17 +               .has_phy                = 1,
18 +               .phy_id                 = 0,
19 +               .force_speed_100        = 1,
20 +               .force_duplex_full      = 1,
21 +       },
22 +
23 +       .has_ohci0                      = 1,
24 +
25 +       .leds = {
26 +               {
27 +                       .name           = "96348W3:green:power",
28 +                       .gpio           = 0,
29 +                       .active_low     = 1,
30 +                       .default_trigger = "default-on",
31 +               },
32 +               {
33 +                       .name           = "96348W3:red:power",
34 +                       .gpio           = 1,
35 +                       .active_low     = 1,
36 +               },
37 +               {
38 +                       .name           = "96348W3::adsl",
39 +                       .gpio           = 2,
40 +                       .active_low     = 1,
41 +               },
42 +               {
43 +                       .name           = "96348W3::internet",
44 +                       .gpio           = 3,
45 +                       .active_low     = 1,
46 +               },
47 +       },
48 +       .buttons = {
49 +                       {
50 +                       .desc           = "reset",
51 +                       .gpio           = 6,
52 +                       .active_low     = 1,
53 +                       .type           = EV_KEY,
54 +                       .code           = KEY_RESTART,
55 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
56 +                       },
57 +       },
58 +};
59 +
60  #endif
61  
62  /*
63 @@ -2571,6 +2624,7 @@ static const struct board_info __initcon
64         &board_ct536_ct5621,
65         &board_96348A_122,
66         &board_CPVA502plus,
67 +       &board_96348W3,
68  #endif
69  
70  #ifdef CONFIG_BCM63XX_CPU_6358