[brcm63xx] add preliminary support for 3.6 kernel
[openwrt.git] / target / linux / brcm63xx / patches-3.6 / 400-ohci-add-driver-for-bcm63xx-integrated-controller.patch
1 From 7b510c5754d3c46e1287803f51e8ecb177414438 Mon Sep 17 00:00:00 2001
2 From: Maxime Bizon <mbizon@freebox.fr>
3 Date: Fri, 10 Jun 2011 19:14:30 +0200
4 Subject: [PATCH 23/63] ohci: add driver for bcm63xx integrated controller.
5
6 ---
7  drivers/usb/host/Kconfig        |    9 ++
8  drivers/usb/host/ohci-bcm63xx.c |  175 +++++++++++++++++++++++++++++++++++++++
9  drivers/usb/host/ohci-hcd.c     |    5 +
10  drivers/usb/host/ohci.h         |    2 +-
11  4 files changed, 190 insertions(+), 1 deletions(-)
12  create mode 100644 drivers/usb/host/ohci-bcm63xx.c
13
14 --- a/drivers/usb/host/Kconfig
15 +++ b/drivers/usb/host/Kconfig
16 @@ -306,6 +306,15 @@ config USB_OHCI_HCD
17           To compile this driver as a module, choose M here: the
18           module will be called ohci-hcd.
19  
20 +config USB_OHCI_BCM63XX
21 +       bool "Support for Broadcom 63xx on-chip OHCI USB controller"
22 +       depends on USB_OHCI_HCD && BCM63XX
23 +       select USB_OHCI_BIG_ENDIAN_DESC
24 +       select USB_OHCI_BIG_ENDIAN_MMIO
25 +       ---help---
26 +         Enables support for the on-chip OHCI controller on
27 +         BCM63XX chips.
28 +
29  config USB_OHCI_HCD_OMAP1
30         bool "OHCI support for OMAP1/2 chips"
31         depends on USB_OHCI_HCD && ARCH_OMAP1
32 --- /dev/null
33 +++ b/drivers/usb/host/ohci-bcm63xx.c
34 @@ -0,0 +1,175 @@
35 +/*
36 + * This file is subject to the terms and conditions of the GNU General Public
37 + * License.  See the file "COPYING" in the main directory of this archive
38 + * for more details.
39 + *
40 + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
41 + */
42 +
43 +#include <linux/init.h>
44 +#include <linux/clk.h>
45 +#include <linux/platform_device.h>
46 +#include <bcm63xx_cpu.h>
47 +#include <bcm63xx_regs.h>
48 +#include <bcm63xx_io.h>
49 +
50 +static struct clk *usb_host_clock;
51 +
52 +static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
53 +{
54 +       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
55 +       int ret;
56 +
57 +       ohci->num_ports = 1;
58 +
59 +       ret = ohci_init(ohci);
60 +       if (ret < 0)
61 +               return ret;
62 +
63 +       /* FIXME: autodetected port 2 is shared with USB slave */
64 +
65 +       ret = ohci_run(ohci);
66 +       if (ret < 0) {
67 +               err("can't start %s", hcd->self.bus_name);
68 +               ohci_stop(hcd);
69 +               return ret;
70 +       }
71 +       return 0;
72 +}
73 +
74 +static const struct hc_driver ohci_bcm63xx_hc_driver = {
75 +       .description =          hcd_name,
76 +       .product_desc =         "BCM63XX integrated OHCI controller",
77 +       .hcd_priv_size =        sizeof(struct ohci_hcd),
78 +
79 +       .irq =                  ohci_irq,
80 +       .flags =                HCD_USB11 | HCD_MEMORY,
81 +       .start =                ohci_bcm63xx_start,
82 +       .stop =                 ohci_stop,
83 +       .shutdown =             ohci_shutdown,
84 +       .urb_enqueue =          ohci_urb_enqueue,
85 +       .urb_dequeue =          ohci_urb_dequeue,
86 +       .endpoint_disable =     ohci_endpoint_disable,
87 +       .get_frame_number =     ohci_get_frame,
88 +       .hub_status_data =      ohci_hub_status_data,
89 +       .hub_control =          ohci_hub_control,
90 +       .start_port_reset =     ohci_start_port_reset,
91 +};
92 +
93 +static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
94 +{
95 +       struct resource *res_mem;
96 +       struct usb_hcd *hcd;
97 +       struct ohci_hcd *ohci;
98 +       struct clk *clk;
99 +       u32 reg;
100 +       int ret, irq;
101 +
102 +       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
103 +       irq = platform_get_irq(pdev, 0);
104 +       if (!res_mem || irq < 0)
105 +               return -ENODEV;
106 +
107 +       /* enable USB host clock */
108 +       clk = clk_get(&pdev->dev, "usbh");
109 +       if (IS_ERR(clk))
110 +               return -ENODEV;
111 +
112 +       clk_enable(clk);
113 +       usb_host_clock = clk;
114 +       msleep(100);
115 +
116 +       if (BCMCPU_IS_6348())
117 +               bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
118 +       else if (BCMCPU_IS_6358()) {
119 +               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
120 +               reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
121 +               reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
122 +               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
123 +               /*
124 +                * The magic value comes for the original vendor BSP
125 +                * and is needed for USB to work. Datasheet does not
126 +                * help, so the magic value is used as-is.
127 +                */
128 +               bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
129 +                               USBH_PRIV_TEST_6358_REG);
130 +
131 +       } else if (BCMCPU_IS_6368()) {
132 +               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
133 +               reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
134 +               reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
135 +               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
136 +
137 +               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
138 +               reg |= USBH_PRIV_SETUP_IOC_MASK;
139 +               bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
140 +       }
141 +
142 +       hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
143 +       if (!hcd)
144 +               return -ENOMEM;
145 +       hcd->rsrc_start = res_mem->start;
146 +       hcd->rsrc_len = res_mem->end - res_mem->start + 1;
147 +
148 +       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
149 +               pr_debug("request_mem_region failed\n");
150 +               ret = -EBUSY;
151 +               goto out;
152 +       }
153 +
154 +       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
155 +       if (!hcd->regs) {
156 +               pr_debug("ioremap failed\n");
157 +               ret = -EIO;
158 +               goto out1;
159 +       }
160 +
161 +       ohci = hcd_to_ohci(hcd);
162 +       ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
163 +               OHCI_QUIRK_FRAME_NO;
164 +       ohci_hcd_init(ohci);
165 +
166 +       ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
167 +       if (ret)
168 +               goto out2;
169 +
170 +       platform_set_drvdata(pdev, hcd);
171 +       return 0;
172 +
173 +out2:
174 +       iounmap(hcd->regs);
175 +out1:
176 +       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
177 +out:
178 +       usb_put_hcd(hcd);
179 +       return ret;
180 +}
181 +
182 +static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
183 +{
184 +       struct usb_hcd *hcd;
185 +
186 +       hcd = platform_get_drvdata(pdev);
187 +       usb_remove_hcd(hcd);
188 +       iounmap(hcd->regs);
189 +       usb_put_hcd(hcd);
190 +       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
191 +       if (usb_host_clock) {
192 +               clk_disable(usb_host_clock);
193 +               clk_put(usb_host_clock);
194 +       }
195 +       platform_set_drvdata(pdev, NULL);
196 +       return 0;
197 +}
198 +
199 +static struct platform_driver ohci_hcd_bcm63xx_driver = {
200 +       .probe          = ohci_hcd_bcm63xx_drv_probe,
201 +       .remove         = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
202 +       .shutdown       = usb_hcd_platform_shutdown,
203 +       .driver         = {
204 +               .name   = "bcm63xx_ohci",
205 +               .owner  = THIS_MODULE,
206 +       },
207 +};
208 +
209 +MODULE_ALIAS("platform:bcm63xx_ohci");
210 --- a/drivers/usb/host/ohci-hcd.c
211 +++ b/drivers/usb/host/ohci-hcd.c
212 @@ -1120,6 +1120,11 @@ MODULE_LICENSE ("GPL");
213  #define PLATFORM_DRIVER                ohci_platform_driver
214  #endif
215  
216 +#ifdef CONFIG_USB_OHCI_BCM63XX
217 +#include "ohci-bcm63xx.c"
218 +#define PLATFORM_DRIVER                ohci_hcd_bcm63xx_driver
219 +#endif
220 +
221  #if    !defined(PCI_DRIVER) &&         \
222         !defined(PLATFORM_DRIVER) &&    \
223         !defined(OMAP1_PLATFORM_DRIVER) &&      \
224 --- a/drivers/usb/host/ohci.h
225 +++ b/drivers/usb/host/ohci.h
226 @@ -647,7 +647,7 @@ static inline u32 hc32_to_cpup (const st
227   * some big-endian SOC implementations.  Same thing happens with PSW access.
228   */
229  
230 -#ifdef CONFIG_PPC_MPC52xx
231 +#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
232  #define big_endian_frame_no_quirk(ohci)        (ohci->flags & OHCI_QUIRK_FRAME_NO)
233  #else
234  #define big_endian_frame_no_quirk(ohci)        0