brcm63xx: Add DT support for A4001N1
[openwrt.git] / target / linux / brcm63xx / patches-3.14 / 561-board_WAP-5813n.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -13,6 +13,7 @@
4  #include <linux/gpio_keys.h>
5  #include <linux/input.h>
6  #include <linux/pci_ids.h>
7 +#include <linux/platform_data/b53.h>
8  #include <linux/platform_device.h>
9  #include <linux/spi/spi.h>
10  #include <linux/spi/spi_gpio.h>
11 @@ -4168,6 +4169,118 @@ static struct board_info __initdata boar
12         .has_ohci0 = 1,
13         .has_ehci0 = 1,
14  };
15 +
16 +static struct b53_platform_data WAP5813n_b53_pdata = {
17 +       .alias = "eth0",
18 +};
19 +
20 +static struct spi_board_info WAP5813n_spi_devices[] = {
21 +       {
22 +               .modalias = "b53-switch",
23 +               .max_speed_hz = 781000,
24 +               .bus_num = 0,
25 +               .chip_select = 0,
26 +               .platform_data = &WAP5813n_b53_pdata,
27 +       }
28 +};
29 +
30 +static struct sprom_fixup __initdata wap5813n_fixups[] = {
31 +       { .offset = 97, .value = 0xfeed },
32 +       { .offset = 98, .value = 0x15d1 },
33 +       { .offset = 99, .value = 0xfb0d },
34 +       { .offset = 113, .value = 0xfef7 },
35 +       { .offset = 114, .value = 0x15f7 },
36 +       { .offset = 115, .value = 0xfb1a },
37 +};
38 +
39 +static struct board_info __initdata board_WAP5813n = {
40 +       .name                           = "96369R-1231N",
41 +       .of_board_id                    = "comtrend,wap-5813n",
42 +       .expected_cpu_id                = 0x6368,
43 +
44 +       .has_uart0                      = 1,
45 +       .has_pci                        = 1,
46 +       .use_fallback_sprom             = 1,
47 +       .has_ohci0                      = 1,
48 +       .has_ehci0                      = 1,
49 +
50 +       .has_enetsw                     = 1,
51 +       .enetsw = {
52 +               .used_ports = {
53 +                       [4] = {
54 +                               .used = 1,
55 +                               .phy_id = 0xff,
56 +                               .bypass_link = 1,
57 +                               .force_speed = 1000,
58 +                               .force_duplex_full = 1,
59 +                               .name = "RGMII",
60 +                       },
61 +               },
62 +       },
63 +
64 +       .leds = {
65 +               {
66 +                       .name           = "WAP-5813n:green:power",
67 +                       .gpio           = 22,
68 +                       .default_trigger = "default-on",
69 +               },
70 +               {
71 +                       .name           = "WAP-5813n:red:power",
72 +                       .gpio           = 24,
73 +               },
74 +               {
75 +                       .name           = "WAP-5813n:green:inet",
76 +                       .gpio           = 5,
77 +               },
78 +               {
79 +                       .name           = "WAP-5813n:red:inet",
80 +                       .gpio           = 31,
81 +               },
82 +               {
83 +                       .name           = "WAP-5813n:green:wps",
84 +                       .gpio           = 23,
85 +                       .active_low     = 1,
86 +               },
87 +       },
88 +
89 +       .buttons = {
90 +               {
91 +                       .desc           = "wlan",
92 +                       .gpio           = 32,
93 +                       .active_low     = 1,
94 +                       .type           = EV_KEY,
95 +                       .code           = KEY_WLAN,
96 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
97 +               },
98 +               {
99 +                       .desc           = "reset",
100 +                       .gpio           = 34,
101 +                       .active_low     = 1,
102 +                       .type           = EV_KEY,
103 +                       .code           = KEY_RESTART,
104 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
105 +               },
106 +               {
107 +                       .desc           = "wps",
108 +                       .gpio           = 35,
109 +                       .active_low     = 1,
110 +                       .type           = EV_KEY,
111 +                       .code           = KEY_WPS_BUTTON,
112 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
113 +               },
114 +       },
115 +
116 +       .fallback_sprom = {
117 +               .type                           = SPROM_BCM43222,
118 +               .pci_bus                        = 0,
119 +               .pci_dev                        = 1,
120 +               .board_fixups                   = wap5813n_fixups,
121 +               .num_board_fixups               = ARRAY_SIZE(wap5813n_fixups),
122 +       },
123 +
124 +       .spis = WAP5813n_spi_devices,
125 +       .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
126 +};
127  #endif /* CONFIG_BCM63XX_CPU_6368 */
128  
129  /*
130 @@ -4547,6 +4660,7 @@ static const struct board_info __initcon
131  #ifdef CONFIG_BCM63XX_CPU_6368
132         &board_96368mvwg,
133         &board_96368mvngr,
134 +       &board_WAP5813n,
135  #endif
136  #ifdef CONFIG_BCM63XX_CPU_63268
137         &board_963268bu_p300,