target/linux/brcm63xx/patches-3.14/356-MIPS-BCM63XX-move-fallback-sprom-support-into-its-ow.patch

   1 From cc025e749a1fece61a6cc0d64bbe7b12472259cc Mon Sep 17 00:00:00 2001
   2 From: Jonas Gorski <jogo@openwrt.org>
   3 Date: Tue, 29 Jul 2014 21:31:12 +0200
   4 Subject: [PATCH 01/10] MIPS: BCM63XX: move fallback sprom support into its own
   5  unit
   6
   7 In preparation for enhancing it, move it into its own file. Require a
   8 mac address to be passed as the argument to always "reserve" the mac
   9 regardless of the inclusion state of SSB.
  10
  11 Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  12 ---
  13  arch/mips/bcm63xx/Makefile                         |  2 +-
  14  arch/mips/bcm63xx/boards/board_common.c            | 53 ++--------------
  15  arch/mips/bcm63xx/sprom.c                          | 70 ++++++++++++++++++++++
  16  .../asm/mach-bcm63xx/bcm63xx_fallback_sprom.h      |  6 ++
  17  4 files changed, 83 insertions(+), 48 deletions(-)
  18  create mode 100644 arch/mips/bcm63xx/sprom.c
  19  create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
  20
  21 --- a/arch/mips/bcm63xx/Makefile
  22 +++ b/arch/mips/bcm63xx/Makefile
  23 @@ -2,7 +2,7 @@ obj-y           += clk.o cpu.o cs.o gpio.o irq.o
  24                    setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
  25                    dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
  26                    dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
  27 -                  usb-common.o
  28 +                  usb-common.o sprom.o
  29  obj-$(CONFIG_EARLY_PRINTK)     += early_printk.o
  30
  31  obj-y          += boards/
  32 --- a/arch/mips/bcm63xx/boards/board_common.c
  33 +++ b/arch/mips/bcm63xx/boards/board_common.c
  34 @@ -43,44 +43,6 @@
  35  static struct board_info board;
  36
  37  /*
  38 - * Register a sane SPROMv2 to make the on-board
  39 - * bcm4318 WLAN work
  40 - */
  41 -#ifdef CONFIG_SSB_PCIHOST
  42 -static struct ssb_sprom bcm63xx_sprom = {
  43 -       .revision               = 0x02,
  44 -       .board_rev              = 0x17,
  45 -       .country_code           = 0x0,
  46 -       .ant_available_bg       = 0x3,
  47 -       .pa0b0                  = 0x15ae,
  48 -       .pa0b1                  = 0xfa85,
  49 -       .pa0b2                  = 0xfe8d,
  50 -       .pa1b0                  = 0xffff,
  51 -       .pa1b1                  = 0xffff,
  52 -       .pa1b2                  = 0xffff,
  53 -       .gpio0                  = 0xff,
  54 -       .gpio1                  = 0xff,
  55 -       .gpio2                  = 0xff,
  56 -       .gpio3                  = 0xff,
  57 -       .maxpwr_bg              = 0x004c,
  58 -       .itssi_bg               = 0x00,
  59 -       .boardflags_lo          = 0x2848,
  60 -       .boardflags_hi          = 0x0000,
  61 -};
  62 -
  63 -int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
  64 -{
  65 -       if (bus->bustype == SSB_BUSTYPE_PCI) {
  66 -               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
  67 -               return 0;
  68 -       } else {
  69 -               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
  70 -               return -EINVAL;
  71 -       }
  72 -}
  73 -#endif
  74 -
  75 -/*
  76   * return board name for /proc/cpuinfo
  77   */
  78  const char *board_get_name(void)
  79 @@ -195,6 +157,7 @@ int __init board_register_devices(void)
  80         int button_count = 0;
  81         int led_count = 0;
  82         int usbh_ports = 0;
  83 +       u8 mac[ETH_ALEN];
  84
  85         if (board.has_uart0)
  86                 bcm63xx_uart_register(0);
  87 @@ -239,15 +202,10 @@ int __init board_register_devices(void)
  88         /* Generate MAC address for WLAN and register our SPROM,
  89          * do this after registering enet devices
  90          */
  91 -#ifdef CONFIG_SSB_PCIHOST
  92 -       if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
  93 -               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  94 -               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  95 -               if (ssb_arch_register_fallback_sprom(
  96 -                               &bcm63xx_get_fallback_sprom) < 0)
  97 -                       pr_err(PFX "failed to register fallback SPROM\n");
  98 -       }
  99 -#endif
 100 +
 101 +       if (board_get_mac_address(mac) ||
 102 +           bcm63xx_register_fallback_sprom(mac))
 103 +               pr_err(PFX "failed to register fallback SPROM\n");
 104
 105         bcm63xx_spi_register();
 106
 107 --- /dev/null
 108 +++ b/arch/mips/bcm63xx/sprom.c
 109 @@ -0,0 +1,70 @@
 110 +/*
 111 + * This file is subject to the terms and conditions of the GNU General Public
 112 + * License.  See the file "COPYING" in the main directory of this archive
 113 + * for more details.
 114 + *
 115 + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
 116 + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
 117 + */
 118 +
 119 +#include <linux/init.h>
 120 +#include <linux/kernel.h>
 121 +#include <linux/string.h>
 122 +#include <linux/platform_device.h>
 123 +#include <linux/ssb/ssb.h>
 124 +#include <bcm63xx_fallback_sprom.h>
 125 +#include <board_bcm963xx.h>
 126 +
 127 +#define PFX    "sprom: "
 128 +
 129 +/*
 130 + * Register a sane SPROMv2 to make the on-board
 131 + * bcm4318 WLAN work
 132 + */
 133 +#ifdef CONFIG_SSB_PCIHOST
 134 +static struct ssb_sprom bcm63xx_sprom = {
 135 +       .revision               = 0x02,
 136 +       .board_rev              = 0x17,
 137 +       .country_code           = 0x0,
 138 +       .ant_available_bg       = 0x3,
 139 +       .pa0b0                  = 0x15ae,
 140 +       .pa0b1                  = 0xfa85,
 141 +       .pa0b2                  = 0xfe8d,
 142 +       .pa1b0                  = 0xffff,
 143 +       .pa1b1                  = 0xffff,
 144 +       .pa1b2                  = 0xffff,
 145 +       .gpio0                  = 0xff,
 146 +       .gpio1                  = 0xff,
 147 +       .gpio2                  = 0xff,
 148 +       .gpio3                  = 0xff,
 149 +       .maxpwr_bg              = 0x004c,
 150 +       .itssi_bg               = 0x00,
 151 +       .boardflags_lo          = 0x2848,
 152 +       .boardflags_hi          = 0x0000,
 153 +};
 154 +
 155 +int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 156 +{
 157 +       if (bus->bustype == SSB_BUSTYPE_PCI) {
 158 +               memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));
 159 +               return 0;
 160 +       } else {
 161 +               printk(KERN_ERR PFX "unable to fill SPROM for given bustype.\n");
 162 +               return -EINVAL;
 163 +       }
 164 +}
 165 +#endif
 166 +
 167 +int __init bcm63xx_register_fallback_sprom(u8 *mac)
 168 +{
 169 +       int ret = 0;
 170 +
 171 +#ifdef CONFIG_SSB_PCIHOST
 172 +       memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
 173 +       memcpy(bcm63xx_sprom.et0mac, mac, ETH_ALEN);
 174 +       memcpy(bcm63xx_sprom.et1mac, mac, ETH_ALEN);
 175 +
 176 +       ret = ssb_arch_register_fallback_sprom(&bcm63xx_get_fallback_sprom);
 177 +#endif
 178 +       return ret;
 179 +}
 180 --- /dev/null
 181 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_fallback_sprom.h
 182 @@ -0,0 +1,6 @@
 183 +#ifndef __BCM63XX_FALLBACK_SPROM
 184 +#define __BCM63XX_FALLBACK_SPROM
 185 +
 186 +int bcm63xx_register_fallback_sprom(u8 *mac);
 187 +
 188 +#endif