target/linux/brcm63xx/patches-3.13/536-board_fast2704.patch

   1 From: Marcin Jurkowski <marcin1j@gmail.com>
   2 Date: Thu, 31 Oct 2013 22:33:10 +0000
   3 Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
   4  router
   5
   6 This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
   7 router.
   8 It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
   9 modem equipped with 64 MiB RAM and 8 MiB flash.
  10
  11 Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
  12 ---
  13 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
  14 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
  15 @@ -1480,6 +1480,122 @@ static struct board_info __initdata boar
  16         },
  17  };
  18
  19 +static struct board_info __initdata board_FAST2704V2 = {
  20 +       .name                           = "F@ST2704V2",
  21 +       .expected_cpu_id                = 0x6328,
  22 +
  23 +       .has_uart0                      = 1,
  24 +       .has_pci                        = 1,
  25 +       .has_ohci0                      = 1,
  26 +       .has_ehci0                      = 1,
  27 +       .has_usbd                       = 1,
  28 +
  29 +       .has_enetsw                     = 1,
  30 +
  31 +       .enetsw = {
  32 +               .used_ports = {
  33 +                       [0] = {
  34 +                               .used   = 1,
  35 +                               .phy_id = 1,
  36 +                               .name   = "Port 1",
  37 +                       },
  38 +                       [1] = {
  39 +                               .used   = 1,
  40 +                               .phy_id = 2,
  41 +                               .name   = "Port 2",
  42 +                       },
  43 +                       [2] = {
  44 +                               .used   = 1,
  45 +                               .phy_id = 3,
  46 +                               .name   = "Port 3",
  47 +                       },
  48 +                       [3] = {
  49 +                               .used   = 1,
  50 +                               .phy_id = 4,
  51 +                               .name   = "Port 4",
  52 +                       },
  53 +               },
  54 +       },
  55 +
  56 +       .leds = {
  57 +               /* front LEDs */
  58 +               {
  59 +                       .name                   = "F@ST2704V2:green:power",
  60 +                       .gpio                   = 4,
  61 +                       .active_low             = 1,
  62 +                       .default_trigger        = "default-on",
  63 +               },
  64 +               {
  65 +                       .name                   = "F@ST2704V2:red:power",
  66 +                       .gpio                   = 5,
  67 +                       .active_low             = 1,
  68 +               },
  69 +               {
  70 +                       .name                   = "F@ST2704V2:red:inet",
  71 +                       .gpio                   = 2,
  72 +                       .active_low             = 1,
  73 +               },
  74 +               {
  75 +                       .name                   = "F@ST2704V2:green:dsl",
  76 +                       .gpio                   = 3,
  77 +                       .active_low             = 1,
  78 +               },
  79 +               {
  80 +                       .name                   = "F@ST2704V2:green:inet",
  81 +                       .gpio                   = 11,
  82 +                       .active_low             = 1,
  83 +               },
  84 +               {
  85 +                       .name                   = "F@ST2704V2:green:usb",
  86 +                       .gpio                   = 1,
  87 +                       .active_low             = 1,
  88 +               },
  89 +
  90 +               /* side button LEDs */
  91 +               {
  92 +                       .name                   = "F@ST2704V2:green:wps",
  93 +                       .gpio                   = 10,
  94 +                       .active_low             = 1,
  95 +               },
  96 +
  97 +               /* FIXME: can't control gpio0 line in "out" state, needs further investigation */
  98 +               /*
  99 +               {
 100 +                       .name                   = "F@ST2704V2:green:rfkill",
 101 +                       .gpio                   = 0,
 102 +                       .active_low             = 1,
 103 +               },
 104 +               */
 105 +
 106 +       },
 107 +       .buttons = {
 108 +               {
 109 +                       .desc                   = "reset",
 110 +                       .gpio                   = 23,
 111 +                       .active_low             = 1,
 112 +                       .type                   = EV_KEY,
 113 +                       .code                   = KEY_RESTART,
 114 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 115 +               },
 116 +               {
 117 +                       .desc                   = "wps",
 118 +                       .gpio                   = 24,
 119 +                       .active_low             = 1,
 120 +                       .type                   = EV_KEY,
 121 +                       .code                   = KEY_WPS_BUTTON,
 122 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 123 +               },
 124 +               {
 125 +                       .desc                   = "rfkill",
 126 +                       .gpio                   = 15,
 127 +                       .active_low             = 1,
 128 +                       .type                   = EV_KEY,
 129 +                       .code                   = KEY_WLAN,
 130 +                       .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 131 +               },
 132 +       },
 133 +};
 134 +
 135  static struct board_info __initdata board_rta1025w_16 = {
 136         .name                           = "RTA1025W_16",
 137         .expected_cpu_id                = 0x6348,
 138 @@ -3832,6 +3948,7 @@ static const struct board_info __initcon
 139         &board_963281TAN,
 140         &board_963281T_TEF,
 141         &board_dsl_274xb_f1,
 142 +       &board_FAST2704V2,
 143  #endif
 144  #ifdef CONFIG_BCM63XX_CPU_6338
 145         &board_96338gw,