target/linux/brcm63xx/patches-2.6.35/430-board_gw6200_gw6000.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -432,6 +432,117 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct board_info __initdata board_gw6200 = {
   8 +       .name                           = "GW6200",
   9 +       .expected_cpu_id                = 0x6348,
  10 +
  11 +       .has_uart0                      = 1,
  12 +       .has_enet0                      = 1,
  13 +       .has_enet1                      = 1,
  14 +       .has_pci                        = 1,
  15 +
  16 +       .enet0 = {
  17 +               .has_phy                = 1,
  18 +               .use_internal_phy       = 1,
  19 +       },
  20 +       .enet1 = {
  21 +               .force_speed_100        = 1,
  22 +               .force_duplex_full      = 1,
  23 +       },
  24 +
  25 +       .has_ohci0 = 1,
  26 +
  27 +       .has_dsp                        = 1,
  28 +               .dsp = {
  29 +        .gpio_rst              = 8, /* FIXME: What is real GPIO here? */
  30 +               .gpio_int               = 34,
  31 +               .ext_irq                = 2,
  32 +               .cs                     = 2,
  33 +       },
  34 +
  35 +       .leds = {
  36 +               {
  37 +                       .name           = "line1",
  38 +                       .gpio           = 4,
  39 +                       .active_low     = 1,
  40 +               },
  41 +               {
  42 +                       .name           = "line2",
  43 +                       .gpio           = 5,
  44 +                       .active_low     = 1,
  45 +               },
  46 +               {
  47 +                       .name           = "line3",
  48 +                       .gpio           = 6,
  49 +                       .active_low     = 1,
  50 +               },
  51 +               {
  52 +                       .name           = "tel",
  53 +                       .gpio           = 7,
  54 +                       .active_low     = 1,
  55 +               },
  56 +               {
  57 +                   .name               = "ethernet",
  58 +                   .gpio               = 35,
  59 +                   .active_low = 1,
  60 +               },
  61 +       },
  62 +       .buttons = {
  63 +               {
  64 +                       .desc           = "reset",
  65 +                       .gpio           = 36,
  66 +                       .active_low     = 1,
  67 +                       .type           = EV_KEY,
  68 +                       .code           = KEY_RESTART,
  69 +                       .threshold      = 3,
  70 +               },
  71 +       },
  72 +};
  73 +
  74 +static struct board_info __initdata board_gw6000 = {
  75 +       .name                           = "GW6000",
  76 +       .expected_cpu_id                = 0x6348,
  77 +
  78 +       .has_uart0                      = 1,
  79 +       .has_enet0                      = 1,
  80 +       .has_enet1                      = 1,
  81 +       .has_pci                        = 1,
  82 +
  83 +       .enet0 = {
  84 +               .has_phy                = 1,
  85 +               .use_internal_phy       = 1,
  86 +       },
  87 +       .enet1 = {
  88 +               .force_speed_100        = 1,
  89 +               .force_duplex_full      = 1,
  90 +       },
  91 +
  92 +       .has_ohci0 = 1,
  93 +
  94 +       .has_dsp                        = 1,
  95 +       .dsp = {
  96 +               .gpio_rst               = 6,
  97 +               .gpio_int               = 34,
  98 +               .ext_irq                = 2,
  99 +               .cs                     = 2,
 100 +       },
 101 +
 102 +       /* GW6000 has no GPIO-controlled leds */
 103 +
 104 +       .buttons = {
 105 +               {
 106 +                       .desc           = "reset",
 107 +                       .gpio           = 36,
 108 +                       .active_low     = 1,
 109 +                       .type           = EV_KEY,
 110 +                       .code           = KEY_RESTART,
 111 +                       .threshold      = 3,
 112 +               },
 113 +       },
 114 +};
 115 +
 116 +
 117 +
 118  static struct board_info __initdata board_FAST2404 = {
 119         .name                           = "F@ST2404",
 120         .expected_cpu_id                = 0x6348,
 121 @@ -1521,6 +1632,8 @@ static const struct board_info __initdat
 122  #ifdef CONFIG_BCM63XX_CPU_6348
 123         &board_96348r,
 124         &board_96348gw,
 125 +       &board_gw6000,
 126 +       &board_gw6200,
 127         &board_96348gw_10,
 128         &board_96348gw_11,
 129         &board_FAST2404,