target/linux/brcm47xx/patches-3.3/185-USB-OHCI-remove-old-SSB-OHCI-driver.patch

   1 --- a/drivers/usb/host/Kconfig
   2 +++ b/drivers/usb/host/Kconfig
   3 @@ -361,10 +361,15 @@ config USB_OHCI_HCD_PCI
   4           If unsure, say Y.
   5
   6  config USB_OHCI_HCD_SSB
   7 -       bool "OHCI support for Broadcom SSB OHCI core"
   8 +       bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
   9         depends on USB_OHCI_HCD && (SSB = y || SSB = USB_OHCI_HCD) && EXPERIMENTAL
  10 +       select USB_HCD_SSB
  11 +       select USB_OHCI_HCD_PLATFORM
  12         default n
  13         ---help---
  14 +         This option is deprecated now and the driver was removed, use
  15 +         USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
  16 +
  17           Support for the Sonics Silicon Backplane (SSB) attached
  18           Broadcom USB OHCI core.
  19
  20 --- a/drivers/usb/host/ohci-hcd.c
  21 +++ b/drivers/usb/host/ohci-hcd.c
  22 @@ -1081,11 +1081,6 @@ MODULE_LICENSE ("GPL");
  23  #define PS3_SYSTEM_BUS_DRIVER  ps3_ohci_driver
  24  #endif
  25
  26 -#ifdef CONFIG_USB_OHCI_HCD_SSB
  27 -#include "ohci-ssb.c"
  28 -#define SSB_OHCI_DRIVER                ssb_ohci_driver
  29 -#endif
  30 -
  31  #ifdef CONFIG_MFD_SM501
  32  #include "ohci-sm501.c"
  33  #define SM501_OHCI_DRIVER      ohci_hcd_sm501_driver
  34 @@ -1134,8 +1129,7 @@ MODULE_LICENSE ("GPL");
  35         !defined(SA1111_DRIVER) &&      \
  36         !defined(PS3_SYSTEM_BUS_DRIVER) && \
  37         !defined(SM501_OHCI_DRIVER) && \
  38 -       !defined(TMIO_OHCI_DRIVER) && \
  39 -       !defined(SSB_OHCI_DRIVER)
  40 +       !defined(TMIO_OHCI_DRIVER)
  41  #error "missing bus glue for ohci-hcd"
  42  #endif
  43
  44 @@ -1201,12 +1195,6 @@ static int __init ohci_hcd_mod_init(void
  45                 goto error_pci;
  46  #endif
  47
  48 -#ifdef SSB_OHCI_DRIVER
  49 -       retval = ssb_driver_register(&SSB_OHCI_DRIVER);
  50 -       if (retval)
  51 -               goto error_ssb;
  52 -#endif
  53 -
  54  #ifdef SM501_OHCI_DRIVER
  55         retval = platform_driver_register(&SM501_OHCI_DRIVER);
  56         if (retval < 0)
  57 @@ -1230,10 +1218,6 @@ static int __init ohci_hcd_mod_init(void
  58         platform_driver_unregister(&SM501_OHCI_DRIVER);
  59   error_sm501:
  60  #endif
  61 -#ifdef SSB_OHCI_DRIVER
  62 -       ssb_driver_unregister(&SSB_OHCI_DRIVER);
  63 - error_ssb:
  64 -#endif
  65  #ifdef PCI_DRIVER
  66         pci_unregister_driver(&PCI_DRIVER);
  67   error_pci:
  68 @@ -1281,9 +1265,6 @@ static void __exit ohci_hcd_mod_exit(voi
  69  #ifdef SM501_OHCI_DRIVER
  70         platform_driver_unregister(&SM501_OHCI_DRIVER);
  71  #endif
  72 -#ifdef SSB_OHCI_DRIVER
  73 -       ssb_driver_unregister(&SSB_OHCI_DRIVER);
  74 -#endif
  75  #ifdef PCI_DRIVER
  76         pci_unregister_driver(&PCI_DRIVER);
  77  #endif
  78 --- a/drivers/usb/host/ohci-ssb.c
  79 +++ /dev/null
  80 @@ -1,260 +0,0 @@
  81 -/*
  82 - * Sonics Silicon Backplane
  83 - * Broadcom USB-core OHCI driver
  84 - *
  85 - * Copyright 2007 Michael Buesch <m@bues.ch>
  86 - *
  87 - * Derived from the OHCI-PCI driver
  88 - * Copyright 1999 Roman Weissgaerber
  89 - * Copyright 2000-2002 David Brownell
  90 - * Copyright 1999 Linus Torvalds
  91 - * Copyright 1999 Gregory P. Smith
  92 - *
  93 - * Derived from the USBcore related parts of Broadcom-SB
  94 - * Copyright 2005 Broadcom Corporation
  95 - *
  96 - * Licensed under the GNU/GPL. See COPYING for details.
  97 - */
  98 -#include <linux/ssb/ssb.h>
  99 -
 100 -
 101 -#define SSB_OHCI_TMSLOW_HOSTMODE       (1 << 29)
 102 -
 103 -struct ssb_ohci_device {
 104 -       struct ohci_hcd ohci; /* _must_ be at the beginning. */
 105 -
 106 -       u32 enable_flags;
 107 -};
 108 -
 109 -static inline
 110 -struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd)
 111 -{
 112 -       return (struct ssb_ohci_device *)(hcd->hcd_priv);
 113 -}
 114 -
 115 -
 116 -static int ssb_ohci_reset(struct usb_hcd *hcd)
 117 -{
 118 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 119 -       struct ohci_hcd *ohci = &ohcidev->ohci;
 120 -       int err;
 121 -
 122 -       ohci_hcd_init(ohci);
 123 -       err = ohci_init(ohci);
 124 -
 125 -       return err;
 126 -}
 127 -
 128 -static int ssb_ohci_start(struct usb_hcd *hcd)
 129 -{
 130 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 131 -       struct ohci_hcd *ohci = &ohcidev->ohci;
 132 -       int err;
 133 -
 134 -       err = ohci_run(ohci);
 135 -       if (err < 0) {
 136 -               ohci_err(ohci, "can't start\n");
 137 -               ohci_stop(hcd);
 138 -       }
 139 -
 140 -       return err;
 141 -}
 142 -
 143 -static const struct hc_driver ssb_ohci_hc_driver = {
 144 -       .description            = "ssb-usb-ohci",
 145 -       .product_desc           = "SSB OHCI Controller",
 146 -       .hcd_priv_size          = sizeof(struct ssb_ohci_device),
 147 -
 148 -       .irq                    = ohci_irq,
 149 -       .flags                  = HCD_MEMORY | HCD_USB11,
 150 -
 151 -       .reset                  = ssb_ohci_reset,
 152 -       .start                  = ssb_ohci_start,
 153 -       .stop                   = ohci_stop,
 154 -       .shutdown               = ohci_shutdown,
 155 -
 156 -       .urb_enqueue            = ohci_urb_enqueue,
 157 -       .urb_dequeue            = ohci_urb_dequeue,
 158 -       .endpoint_disable       = ohci_endpoint_disable,
 159 -
 160 -       .get_frame_number       = ohci_get_frame,
 161 -
 162 -       .hub_status_data        = ohci_hub_status_data,
 163 -       .hub_control            = ohci_hub_control,
 164 -#ifdef CONFIG_PM
 165 -       .bus_suspend            = ohci_bus_suspend,
 166 -       .bus_resume             = ohci_bus_resume,
 167 -#endif
 168 -
 169 -       .start_port_reset       = ohci_start_port_reset,
 170 -};
 171 -
 172 -static void ssb_ohci_detach(struct ssb_device *dev)
 173 -{
 174 -       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 175 -
 176 -       if (hcd->driver->shutdown)
 177 -               hcd->driver->shutdown(hcd);
 178 -       usb_remove_hcd(hcd);
 179 -       iounmap(hcd->regs);
 180 -       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 181 -       usb_put_hcd(hcd);
 182 -       ssb_device_disable(dev, 0);
 183 -}
 184 -
 185 -static int ssb_ohci_attach(struct ssb_device *dev)
 186 -{
 187 -       struct ssb_ohci_device *ohcidev;
 188 -       struct usb_hcd *hcd;
 189 -       int err = -ENOMEM;
 190 -       u32 tmp, flags = 0;
 191 -
 192 -       if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) ||
 193 -           dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32)))
 194 -               return -EOPNOTSUPP;
 195 -
 196 -       if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) {
 197 -               /* Put the device into host-mode. */
 198 -               flags |= SSB_OHCI_TMSLOW_HOSTMODE;
 199 -               ssb_device_enable(dev, flags);
 200 -       } else if (dev->id.coreid == SSB_DEV_USB20_HOST) {
 201 -               /*
 202 -                * USB 2.0 special considerations:
 203 -                *
 204 -                * In addition to the standard SSB reset sequence, the Host
 205 -                * Control Register must be programmed to bring the USB core
 206 -                * and various phy components out of reset.
 207 -                */
 208 -               ssb_device_enable(dev, 0);
 209 -               ssb_write32(dev, 0x200, 0x7ff);
 210 -
 211 -               /* Change Flush control reg */
 212 -               tmp = ssb_read32(dev, 0x400);
 213 -               tmp &= ~8;
 214 -               ssb_write32(dev, 0x400, tmp);
 215 -               tmp = ssb_read32(dev, 0x400);
 216 -
 217 -               /* Change Shim control reg */
 218 -               tmp = ssb_read32(dev, 0x304);
 219 -               tmp &= ~0x100;
 220 -               ssb_write32(dev, 0x304, tmp);
 221 -               tmp = ssb_read32(dev, 0x304);
 222 -
 223 -               udelay(1);
 224 -
 225 -               /* Work around for 5354 failures */
 226 -               if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) {
 227 -                       /* Change syn01 reg */
 228 -                       tmp = 0x00fe00fe;
 229 -                       ssb_write32(dev, 0x894, tmp);
 230 -
 231 -                       /* Change syn03 reg */
 232 -                       tmp = ssb_read32(dev, 0x89c);
 233 -                       tmp |= 0x1;
 234 -                       ssb_write32(dev, 0x89c, tmp);
 235 -               }
 236 -       } else
 237 -               ssb_device_enable(dev, 0);
 238 -
 239 -       hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev,
 240 -                       dev_name(dev->dev));
 241 -       if (!hcd)
 242 -               goto err_dev_disable;
 243 -       ohcidev = hcd_to_ssb_ohci(hcd);
 244 -       ohcidev->enable_flags = flags;
 245 -
 246 -       tmp = ssb_read32(dev, SSB_ADMATCH0);
 247 -       hcd->rsrc_start = ssb_admatch_base(tmp);
 248 -       hcd->rsrc_len = ssb_admatch_size(tmp);
 249 -       hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
 250 -       if (!hcd->regs)
 251 -               goto err_put_hcd;
 252 -       err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
 253 -       if (err)
 254 -               goto err_iounmap;
 255 -
 256 -       ssb_set_drvdata(dev, hcd);
 257 -
 258 -       return err;
 259 -
 260 -err_iounmap:
 261 -       iounmap(hcd->regs);
 262 -err_put_hcd:
 263 -       usb_put_hcd(hcd);
 264 -err_dev_disable:
 265 -       ssb_device_disable(dev, flags);
 266 -       return err;
 267 -}
 268 -
 269 -static int ssb_ohci_probe(struct ssb_device *dev,
 270 -               const struct ssb_device_id *id)
 271 -{
 272 -       int err;
 273 -       u16 chipid_top;
 274 -
 275 -       /* USBcores are only connected on embedded devices. */
 276 -       chipid_top = (dev->bus->chip_id & 0xFF00);
 277 -       if (chipid_top != 0x4700 && chipid_top != 0x5300)
 278 -               return -ENODEV;
 279 -
 280 -       /* TODO: Probably need checks here; is the core connected? */
 281 -
 282 -       if (usb_disabled())
 283 -               return -ENODEV;
 284 -
 285 -       /* We currently always attach SSB_DEV_USB11_HOSTDEV
 286 -        * as HOST OHCI. If we want to attach it as Client device,
 287 -        * we must branch here and call into the (yet to
 288 -        * be written) Client mode driver. Same for remove(). */
 289 -
 290 -       err = ssb_ohci_attach(dev);
 291 -
 292 -       return err;
 293 -}
 294 -
 295 -static void ssb_ohci_remove(struct ssb_device *dev)
 296 -{
 297 -       ssb_ohci_detach(dev);
 298 -}
 299 -
 300 -#ifdef CONFIG_PM
 301 -
 302 -static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state)
 303 -{
 304 -       ssb_device_disable(dev, 0);
 305 -
 306 -       return 0;
 307 -}
 308 -
 309 -static int ssb_ohci_resume(struct ssb_device *dev)
 310 -{
 311 -       struct usb_hcd *hcd = ssb_get_drvdata(dev);
 312 -       struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd);
 313 -
 314 -       ssb_device_enable(dev, ohcidev->enable_flags);
 315 -
 316 -       ohci_finish_controller_resume(hcd);
 317 -       return 0;
 318 -}
 319 -
 320 -#else /* !CONFIG_PM */
 321 -#define ssb_ohci_suspend       NULL
 322 -#define ssb_ohci_resume        NULL
 323 -#endif /* CONFIG_PM */
 324 -
 325 -static const struct ssb_device_id ssb_ohci_table[] = {
 326 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV),
 327 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV),
 328 -       SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV),
 329 -       SSB_DEVTABLE_END
 330 -};
 331 -MODULE_DEVICE_TABLE(ssb, ssb_ohci_table);
 332 -
 333 -static struct ssb_driver ssb_ohci_driver = {
 334 -       .name           = KBUILD_MODNAME,
 335 -       .id_table       = ssb_ohci_table,
 336 -       .probe          = ssb_ohci_probe,
 337 -       .remove         = ssb_ohci_remove,
 338 -       .suspend        = ssb_ohci_suspend,
 339 -       .resume         = ssb_ohci_resume,
 340 -};