target/linux/bcm53xx/patches-4.3/050-ARM-dts-enable-clock-support-for-BCM5301X.patch

   1 From e96ef422d0095fe9ae39b03c0805a0db8ff7e382 Mon Sep 17 00:00:00 2001
   2 From: Jon Mason <jonmason@broadcom.com>
   3 Date: Tue, 13 Oct 2015 17:22:25 -0400
   4 Subject: [PATCH 50/50] ARM: dts: enable clock support for BCM5301X
   5
   6 Replace current device tree dummy clocks with real clock support for
   7 Broadcom Northstar SoCs.
   8
   9 Signed-off-by: Jon Mason <jonmason@broadcom.com>
  10 ---
  11  arch/arm/boot/dts/bcm5301x.dtsi | 88 ++++++++++++++++++++++++++++++++---------
  12  1 file changed, 69 insertions(+), 19 deletions(-)
  13
  14 --- a/arch/arm/boot/dts/bcm5301x.dtsi
  15 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
  16 @@ -8,6 +8,7 @@
  17   * Licensed under the GNU/GPL. See COPYING for details.
  18   */
  19
  20 +#include <dt-bindings/clock/bcm-nsp.h>
  21  #include <dt-bindings/gpio/gpio.h>
  22  #include <dt-bindings/input/input.h>
  23  #include <dt-bindings/interrupt-controller/irq.h>
  24 @@ -42,41 +43,48 @@
  25
  26         mpcore {
  27                 compatible = "simple-bus";
  28 -               ranges = <0x00000000 0x19020000 0x00003000>;
  29 +               ranges = <0x00000000 0x19000000 0x00023000>;
  30                 #address-cells = <1>;
  31                 #size-cells = <1>;
  32
  33 -               scu@0000 {
  34 +               a9pll: arm_clk@00000 {
  35 +                       #clock-cells = <0>;
  36 +                       compatible = "brcm,nsp-armpll";
  37 +                       clocks = <&osc>;
  38 +                       reg = <0x00000 0x1000>;
  39 +               };
  40 +
  41 +               scu@20000 {
  42                         compatible = "arm,cortex-a9-scu";
  43 -                       reg = <0x0000 0x100>;
  44 +                       reg = <0x20000 0x100>;
  45                 };
  46
  47 -               timer@0200 {
  48 +               timer@20200 {
  49                         compatible = "arm,cortex-a9-global-timer";
  50 -                       reg = <0x0200 0x100>;
  51 +                       reg = <0x20200 0x100>;
  52                         interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
  53 -                       clocks = <&clk_periph>;
  54 +                       clocks = <&periph_clk>;
  55                 };
  56
  57 -               local-timer@0600 {
  58 +               local-timer@20600 {
  59                         compatible = "arm,cortex-a9-twd-timer";
  60 -                       reg = <0x0600 0x100>;
  61 +                       reg = <0x20600 0x100>;
  62                         interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
  63 -                       clocks = <&clk_periph>;
  64 +                       clocks = <&periph_clk>;
  65                 };
  66
  67 -               gic: interrupt-controller@1000 {
  68 +               gic: interrupt-controller@21000 {
  69                         compatible = "arm,cortex-a9-gic";
  70                         #interrupt-cells = <3>;
  71                         #address-cells = <0>;
  72                         interrupt-controller;
  73 -                       reg = <0x1000 0x1000>,
  74 -                             <0x0100 0x100>;
  75 +                       reg = <0x21000 0x1000>,
  76 +                             <0x20100 0x100>;
  77                 };
  78
  79 -               L2: cache-controller@2000 {
  80 +               L2: cache-controller@22000 {
  81                         compatible = "arm,pl310-cache";
  82 -                       reg = <0x2000 0x1000>;
  83 +                       reg = <0x22000 0x1000>;
  84                         cache-unified;
  85                         arm,shared-override;
  86                         prefetch-data = <1>;
  87 @@ -94,14 +102,37 @@
  88
  89         clocks {
  90                 #address-cells = <1>;
  91 -               #size-cells = <0>;
  92 +               #size-cells = <1>;
  93 +               ranges;
  94
  95 -               /* As long as we do not have a real clock driver us this
  96 -                * fixed clock */
  97 -               clk_periph: periph {
  98 +               osc: oscillator {
  99 +                       #clock-cells = <0>;
 100                         compatible = "fixed-clock";
 101 +                       clock-frequency = <25000000>;
 102 +               };
 103 +
 104 +               iprocmed: iprocmed {
 105                         #clock-cells = <0>;
 106 -                       clock-frequency = <400000000>;
 107 +                       compatible = "fixed-factor-clock";
 108 +                       clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
 109 +                       clock-div = <2>;
 110 +                       clock-mult = <1>;
 111 +               };
 112 +
 113 +               iprocslow: iprocslow {
 114 +                       #clock-cells = <0>;
 115 +                       compatible = "fixed-factor-clock";
 116 +                       clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
 117 +                       clock-div = <4>;
 118 +                       clock-mult = <1>;
 119 +               };
 120 +
 121 +               periph_clk: periph_clk {
 122 +                       #clock-cells = <0>;
 123 +                       compatible = "fixed-factor-clock";
 124 +                       clocks = <&a9pll>;
 125 +                       clock-div = <2>;
 126 +                       clock-mult = <1>;
 127                 };
 128         };
 129
 130 @@ -189,4 +220,23 @@
 131
 132                 brcm,nand-has-wp;
 133         };
 134 +
 135 +       lcpll0: lcpll0@1800c100 {
 136 +               #clock-cells = <1>;
 137 +               compatible = "brcm,nsp-lcpll0";
 138 +               reg = <0x1800c100 0x14>;
 139 +               clocks = <&osc>;
 140 +               clock-output-names = "lcpll0", "pcie_phy", "sdio",
 141 +                                    "ddr_phy";
 142 +       };
 143 +
 144 +       genpll: genpll@1800c140 {
 145 +               #clock-cells = <1>;
 146 +               compatible = "brcm,nsp-genpll";
 147 +               reg = <0x1800c140 0x24>;
 148 +               clocks = <&osc>;
 149 +               clock-output-names = "genpll", "phy", "ethernetclk",
 150 +                                    "usbclk", "iprocfast", "sata1",
 151 +                                    "sata2";
 152 +       };
 153  };