target/linux/bcm53xx/patches-4.1/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch

   1 From f1ee1275f65e87e035260f4d09a0f0ba98c6854d Mon Sep 17 00:00:00 2001
   2 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
   3 Date: Sun, 21 Jun 2015 12:56:32 +0200
   4 Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
   5 MIME-Version: 1.0
   6 Content-Type: text/plain; charset=UTF-8
   7 Content-Transfer-Encoding: 8bit
   8
   9 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  10 ---
  11  arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 20 ++++++++++++++++++++
  12  arch/arm/boot/dts/bcm4708-netgear-r6250.dts       | 11 +++++++++++
  13  2 files changed, 31 insertions(+)
  14
  15 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
  16 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
  17 @@ -24,6 +24,26 @@
  18                 reg = <0x00000000 0x08000000>;
  19         };
  20
  21 +       axi@18000000 {
  22 +               usb2@21000 {
  23 +                       reg = <0x00021000 0x1000>;
  24 +
  25 +                       #address-cells = <1>;
  26 +                       #size-cells = <1>;
  27 +
  28 +                       vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
  29 +               };
  30 +
  31 +               usb3@23000 {
  32 +                       reg = <0x00023000 0x1000>;
  33 +
  34 +                       #address-cells = <1>;
  35 +                       #size-cells = <1>;
  36 +
  37 +                       vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  38 +               };
  39 +       };
  40 +
  41         spi {
  42                 compatible = "spi-gpio";
  43                 num-chipselects = <1>;
  44 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
  45 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
  46 @@ -24,6 +24,17 @@
  47                 reg = <0x00000000 0x08000000>;
  48         };
  49
  50 +       axi@18000000 {
  51 +               usb3@23000 {
  52 +                       reg = <0x00023000 0x1000>;
  53 +
  54 +                       #address-cells = <1>;
  55 +                       #size-cells = <1>;
  56 +
  57 +                       vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
  58 +               };
  59 +       };
  60 +
  61         leds {
  62                 compatible = "gpio-leds";
  63