ar71xx: add linux 3.14 support
[openwrt.git] / target / linux / ar71xx / patches-3.14 / 616-MIPS-ath79-ubnt-xw.patch
1 --- a/arch/mips/ath79/mach-ubnt-xm.c
2 +++ b/arch/mips/ath79/mach-ubnt-xm.c
3 @@ -332,3 +332,60 @@ static void __init ubnt_uap_pro_setup(vo
4  MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
5              ubnt_uap_pro_setup);
6  
7 +#define UBNT_XW_GPIO_LED_L1            11
8 +#define UBNT_XW_GPIO_LED_L2            16
9 +#define UBNT_XW_GPIO_LED_L3            13
10 +#define UBNT_XW_GPIO_LED_L4            14
11 +
12 +static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
13 +       {
14 +               .name           = "ubnt:red:link1",
15 +               .gpio           = UBNT_XW_GPIO_LED_L1,
16 +               .active_low     = 1,
17 +       }, {
18 +               .name           = "ubnt:orange:link2",
19 +               .gpio           = UBNT_XW_GPIO_LED_L2,
20 +               .active_low     = 1,
21 +       }, {
22 +               .name           = "ubnt:green:link3",
23 +               .gpio           = UBNT_XW_GPIO_LED_L3,
24 +               .active_low     = 1,
25 +       }, {
26 +               .name           = "ubnt:green:link4",
27 +               .gpio           = UBNT_XW_GPIO_LED_L4,
28 +               .active_low     = 1,
29 +       },
30 +};
31 +
32 +static void __init ubnt_nano_m_xw_setup(void)
33 +{
34 +       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
35 +
36 +       ath79_register_m25p80(NULL);
37 +
38 +       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
39 +                                ubnt_xw_leds_gpio);
40 +       ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
41 +                                        ARRAY_SIZE(ubnt_xm_gpio_keys),
42 +                                        ubnt_xm_gpio_keys);
43 +
44 +       ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
45 +       ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
46 +
47 +       ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
48 +
49 +       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
50 +       ath79_init_mac(ath79_eth0_data.mac_addr,
51 +                      eeprom + UAP_PRO_MAC0_OFFSET, 0);
52 +
53 +       /* GMAC0 is connected to an AR8326 switch */
54 +       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
55 +       ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
56 +       ath79_eth0_data.speed = SPEED_100;
57 +       ath79_eth0_data.duplex = DUPLEX_FULL;
58 +       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
59 +       ath79_register_eth(0);
60 +}
61 +
62 +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
63 +            ubnt_nano_m_xw_setup);
64 --- a/arch/mips/ath79/machtypes.h
65 +++ b/arch/mips/ath79/machtypes.h
66 @@ -124,6 +124,7 @@ enum ath79_mach_type {
67         ATH79_MACH_UBNT_LSSR71,         /* Ubiquiti LS-SR71 */
68         ATH79_MACH_UBNT_LSX,            /* Ubiquiti LSX */
69         ATH79_MACH_UBNT_NANO_M,         /* Ubiquiti NanoStation M */
70 +       ATH79_MACH_UBNT_NANO_M_XW,      /* Ubiquiti NanoStation M XW */
71         ATH79_MACH_UBNT_ROCKET_M,       /* Ubiquiti Rocket M */
72         ATH79_MACH_UBNT_RSPRO,          /* Ubiquiti RouterStation Pro */
73         ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */