target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c

   1 /*
   2  *  D-Link DIR-825 rev. C1 board support
   3  *
   4  *  Copyright (C) 2013 Alexander Stadler
   5  *
   6  *  This program is free software; you can redistribute it and/or modify it
   7  *  under the terms of the GNU General Public License version 2 as published
   8  *  by the Free Software Foundation.
   9  */
  10
  11 #include <linux/pci.h>
  12 #include <linux/phy.h>
  13 #include <linux/gpio.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/ath9k_platform.h>
  16 #include <linux/ar8216_platform.h>
  17
  18 #include <asm/mach-ath79/ar71xx_regs.h>
  19
  20 #include "common.h"
  21 #include "dev-ap9x-pci.h"
  22 #include "dev-eth.h"
  23 #include "dev-gpio-buttons.h"
  24 #include "dev-leds-gpio.h"
  25 #include "dev-m25p80.h"
  26 #include "dev-spi.h"
  27 #include "dev-usb.h"
  28 #include "dev-wmac.h"
  29 #include "machtypes.h"
  30
  31 #define DIR825C1_GPIO_LED_BLUE_USB              11
  32 #define DIR825C1_GPIO_LED_ORANGE_POWER          14
  33 #define DIR825C1_GPIO_LED_BLUE_POWER            22
  34 #define DIR825C1_GPIO_LED_BLUE_WPS              15
  35 #define DIR825C1_GPIO_LED_ORANGE_PLANET         19
  36 #define DIR825C1_GPIO_LED_BLUE_PLANET           18
  37
  38 #define DIR825C1_GPIO_BTN_RESET                 17
  39 #define DIR825C1_GPIO_BTN_WPS                   16
  40
  41 #define DIR825C1_KEYS_POLL_INTERVAL             20      /* msecs */
  42 #define DIR825C1_KEYS_DEBOUNCE_INTERVAL         (3 * DIR825C1_KEYS_POLL_INTERVAL)
  43
  44 #define DIR825C1_MAC0_OFFSET                    0x4
  45 #define DIR825C1_MAC1_OFFSET                    0x18
  46 #define DIR825C1_WMAC_CALDATA_OFFSET            0x1000
  47 #define DIR825C1_PCIE_CALDATA_OFFSET            0x5000
  48
  49 static struct gpio_led dir825c1_leds_gpio[] __initdata = {
  50         {
  51                 .name           = "d-link:blue:usb",
  52                 .gpio           = DIR825C1_GPIO_LED_BLUE_USB,
  53                 .active_low     = 1,
  54         },
  55         {
  56                 .name           = "d-link:orange:power",
  57                 .gpio           = DIR825C1_GPIO_LED_ORANGE_POWER,
  58                 .active_low     = 1,
  59         },
  60         {
  61                 .name           = "d-link:blue:power",
  62                 .gpio           = DIR825C1_GPIO_LED_BLUE_POWER,
  63                 .active_low     = 1,
  64         },
  65         {
  66                 .name           = "d-link:blue:wps",
  67                 .gpio           = DIR825C1_GPIO_LED_BLUE_WPS,
  68                 .active_low     = 1,
  69         },
  70         {
  71                 .name           = "d-link:orange:planet",
  72                 .gpio           = DIR825C1_GPIO_LED_ORANGE_PLANET,
  73                 .active_low     = 1,
  74         },
  75         {
  76                 .name           = "d-link:blue:planet",
  77                 .gpio           = DIR825C1_GPIO_LED_BLUE_PLANET,
  78                 .active_low     = 1,
  79         },
  80 };
  81
  82 static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
  83         {
  84                 .desc           = "reset",
  85                 .type           = EV_KEY,
  86                 .code           = KEY_RESTART,
  87                 .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
  88                 .gpio           = DIR825C1_GPIO_BTN_RESET,
  89                 .active_low     = 1,
  90         },
  91         {
  92                 .desc           = "wps",
  93                 .type           = EV_KEY,
  94                 .code           = KEY_WPS_BUTTON,
  95                 .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
  96                 .gpio           = DIR825C1_GPIO_BTN_WPS,
  97                 .active_low     = 1,
  98         },
  99 };
 100
 101 static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
 102         .mode = AR8327_PAD_MAC_RGMII,
 103         .txclk_delay_en = true,
 104         .rxclk_delay_en = true,
 105         .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 106         .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 107 };
 108
 109 static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
 110         .led_ctrl0 = 0xc737c737,
 111         .led_ctrl1 = 0x00000000,
 112         .led_ctrl2 = 0x00000000,
 113         .led_ctrl3 = 0x0030c300,
 114         .open_drain = false,
 115 };
 116
 117 static struct ar8327_platform_data dir825c1_ar8327_data = {
 118         .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
 119         .port0_cfg = {
 120                 .force_link = 1,
 121                 .speed = AR8327_PORT_SPEED_1000,
 122                 .duplex = 1,
 123                 .txpause = 1,
 124                 .rxpause = 1,
 125         },
 126         .led_cfg = &dir825c1_ar8327_led_cfg,
 127 };
 128
 129 static struct mdio_board_info dir825c1_mdio0_info[] = {
 130         {
 131                 .bus_id = "ag71xx-mdio.0",
 132                 .phy_addr = 0,
 133                 .platform_data = &dir825c1_ar8327_data,
 134         },
 135 };
 136
 137 static void dir825c1_read_ascii_mac(u8 *dest, u8 *src)
 138 {
 139         int ret;
 140
 141         ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
 142                      &dest[0], &dest[1], &dest[2],
 143                      &dest[3], &dest[4], &dest[5]);
 144
 145         if (ret != ETH_ALEN)
 146                 memset(dest, 0, ETH_ALEN);
 147 }
 148
 149 static void __init dir825c1_setup(void)
 150 {
 151         u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
 152         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 153         u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
 154         u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
 155
 156         dir825c1_read_ascii_mac(mac0, mac + DIR825C1_MAC0_OFFSET);
 157         dir825c1_read_ascii_mac(mac1, mac + DIR825C1_MAC1_OFFSET);
 158
 159         ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB, AR934X_GPIO_OUT_GPIO);
 160
 161         ath79_register_m25p80(NULL);
 162
 163         ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
 164                                  dir825c1_leds_gpio);
 165         ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
 166                                         ARRAY_SIZE(dir825c1_gpio_keys),
 167                                         dir825c1_gpio_keys);
 168
 169         ap9x_pci_setup_wmac_led_pin(0, 13);
 170         ap9x_pci_setup_wmac_led_pin(1, 32);
 171
 172         ath79_init_mac(wmac0, mac0, 0);
 173         ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
 174
 175         ath79_init_mac(wmac1, mac1, 1);
 176         ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
 177
 178         ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
 179
 180         mdiobus_register_board_info(dir825c1_mdio0_info,
 181                                     ARRAY_SIZE(dir825c1_mdio0_info));
 182
 183         ath79_register_mdio(0, 0x0);
 184
 185         ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
 186
 187         /* GMAC0 is connected to an AR8327N switch */
 188         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 189         ath79_eth0_data.phy_mask = BIT(0);
 190         ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 191         ath79_eth0_pll_data.pll_1000 = 0x06000000;
 192         ath79_register_eth(0);
 193
 194         ath79_register_usb();
 195 }
 196
 197 MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
 198              "D-Link DIR-825 rev. C1",
 199              dir825c1_setup);