target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c

   1 /*
   2  *  $Id$
   3  *
   4  *  Edimax boards
   5  *
   6  *  Copyright (C) 2007 OpenWrt.org
   7  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or
  10  *  modify it under the terms of the GNU General Public License
  11  *  as published by the Free Software Foundation; either version 2
  12  *  of the License, or (at your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful,
  15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *  GNU General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License
  20  *  along with this program; if not, write to the
  21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  22  *  Boston, MA  02110-1301, USA.
  23  *
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28
  29 #include <asm/bootinfo.h>
  30 #include <asm/gpio.h>
  31
  32 #include <adm5120_board.h>
  33 #include <adm5120_irq.h>
  34 #include <adm5120_platform.h>
  35
  36 static struct adm5120_pci_irq br61xx_pci_irqs[] __initdata = {
  37         PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
  38 };
  39
  40 static struct mtd_partition br61xx_partitions[] = {
  41         {
  42                 .name   = "admboot",
  43                 .offset = 0,
  44                 .size   = 32*1024,
  45                 .mask_flags = MTD_WRITEABLE,
  46         } , {
  47                 .name   = "config",
  48                 .offset = MTDPART_OFS_APPEND,
  49                 .size   = 32*1024,
  50         } , {
  51                 .name   = "firmware",
  52                 .offset = MTDPART_OFS_APPEND,
  53                 .size   = MTDPART_SIZ_FULL,
  54         }
  55 };
  56
  57 static struct platform_device *br6104k_devices[] __initdata = {
  58         &adm5120_flash0_device,
  59         &adm5120_hcd_device,
  60 };
  61
  62 static struct platform_device *br61x4wg_devices[] __initdata = {
  63         &adm5120_flash0_device,
  64 };
  65
  66 static void __init br61xx_setup(void) {
  67         /* setup data for flash0 device */
  68         adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
  69         adm5120_flash0_data.parts = br61xx_partitions;
  70
  71         /* TODO: setup mac addresses, if possible */
  72 }
  73
  74 unsigned char br61xx_vlans[6] = {
  75         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
  76 };
  77
  78 /*--------------------------------------------------------------------------*/
  79
  80 ADM5120_BOARD_START(BR6104K, "Edimax BR-6104K/6104KP")
  81         .board_setup    = br61xx_setup,
  82         .eth_num_ports  = 5,
  83         .eth_vlans      = br61xx_vlans,
  84         .num_devices    = ARRAY_SIZE(br6104k_devices),
  85         .devices        = br6104k_devices,
  86 ADM5120_BOARD_END
  87
  88 ADM5120_BOARD_START(BR61x4WG, "Edimax BR-6104WG/6114WG")
  89         .board_setup    = br61xx_setup,
  90         .eth_num_ports  = 5,
  91         .eth_vlans      = br61xx_vlans,
  92         .num_devices    = ARRAY_SIZE(br61x4wg_devices),
  93         .devices        = br61x4wg_devices,
  94         .pci_nr_irqs    = ARRAY_SIZE(br61xx_pci_irqs),
  95         .pci_irq_map    = br61xx_pci_irqs,
  96 ADM5120_BOARD_END