[adm5120] disable VLANs for RB1xx boards (#2132)
[openwrt.git] / target / linux / adm5120-2.6 / files / arch / mips / adm5120 / boards / mikrotik.c
1 /*
2  *  $Id$
3  *
4  *  Mikrotik RouterBOARDs 111/112/133/133C/150/153
5  *
6  *  Copyright (C) 2007 OpenWrt.org
7  *  Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
8  *
9  *  This program is free software; you can redistribute it and/or
10  *  modify it under the terms of the GNU General Public License
11  *  as published by the Free Software Foundation; either version 2
12  *  of the License, or (at your option) any later version.
13  *
14  *  This program is distributed in the hope that it will be useful,
15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *  GNU General Public License for more details.
18  *
19  *  You should have received a copy of the GNU General Public License
20  *  along with this program; if not, write to the
21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22  *  Boston, MA  02110-1301, USA.
23  *
24  */
25
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28
29 #include <asm/bootinfo.h>
30 #include <asm/gpio.h>
31
32 #include <asm/mach-adm5120/adm5120_board.h>
33 #include <asm/mach-adm5120/adm5120_platform.h>
34
35 static struct mtd_partition rb1xx_partitions[] = {
36         {
37                 .name   = "booter",
38                 .offset = 0,
39                 .size   = 64*1024,
40                 .mask_flags = MTD_WRITEABLE,
41         } , {
42                 .name   = "firmware",
43                 .offset = MTDPART_OFS_APPEND,
44                 .size   = MTDPART_SIZ_FULL,
45         }
46 };
47
48 static struct platform_device *rb1xx_devices[] __initdata = {
49         &adm5120_flash0_device,
50         &adm5120_nand_device,
51 };
52
53 static struct platform_device *rb150_devices[] __initdata = {
54         &adm5120_flash0_device,
55         /* TODO: nand device is not yet supported */
56 };
57
58 static void __init rb1xx_setup(void)
59 {
60         /* setup data for flash0 device */
61         adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
62         adm5120_flash0_data.parts = rb1xx_partitions;
63
64         /* TODO: setup mac address */
65 }
66
67 #if 0
68 /*
69  * RB1xx boards have bad network performance with the default VLAN matrixes.
70  * Disable it while the ethernet driver gets fixed.
71  */
72 static unsigned char rb11x_vlans[6] __initdata = {
73         /* FIXME: untested */
74         0x41, 0x00, 0x00, 0x00, 0x00, 0x00
75 };
76
77 static unsigned char rb133_vlans[6] __initdata = {
78         /* FIXME: untested */
79         0x44, 0x42, 0x41, 0x00, 0x00, 0x00
80 };
81
82 static unsigned char rb133c_vlans[6] __initdata = {
83         /* FIXME: untested */
84         0x44, 0x00, 0x00, 0x00, 0x00, 0x00
85 };
86
87 static unsigned char rb15x_vlans[6] __initdata = {
88         /* FIXME: untested */
89         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
90 };
91 #else
92 static unsigned char rb_vlans[6] __initdata = {
93         0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
94 };
95 #define rb11x_vlans     rb_vlans
96 #define rb133_vlans     rb_vlans
97 #define rb133c_vlans    rb_vlans
98 #define rb15x_vlans     rb_vlans
99 #endif
100
101 static struct adm5120_board rb111_board __initdata = {
102         .mach_type      = MACH_ADM5120_RB_111,
103         .name           = "Mikrotik RouterBOARD 111",
104         .board_setup    = rb1xx_setup,
105         .eth_num_ports  = 1,
106         .eth_vlans      = rb11x_vlans,
107         .num_devices    = ARRAY_SIZE(rb1xx_devices),
108         .devices        = rb1xx_devices,
109 };
110
111 static struct adm5120_board rb112_board __initdata = {
112         .mach_type      = MACH_ADM5120_RB_112,
113         .name           = "Mikrotik RouterBOARD 112",
114         .board_setup    = rb1xx_setup,
115         .eth_num_ports  = 1,
116         .eth_vlans      = rb11x_vlans,
117         .num_devices    = ARRAY_SIZE(rb1xx_devices),
118         .devices        = rb1xx_devices,
119 };
120
121 static struct adm5120_board rb133_board __initdata = {
122         .mach_type      = MACH_ADM5120_RB_133,
123         .name           = "Mikrotik RouterBOARD 133",
124         .board_setup    = rb1xx_setup,
125         .eth_num_ports  = 3,
126         .eth_vlans      = rb133_vlans,
127         .num_devices    = ARRAY_SIZE(rb1xx_devices),
128         .devices        = rb1xx_devices,
129 };
130
131 static struct adm5120_board rb133c_board __initdata = {
132         .mach_type      = MACH_ADM5120_RB_133C,
133         .name           = "Mikrotik RouterBOARD 133C",
134         .board_setup    = rb1xx_setup,
135         .eth_num_ports  = 1,
136         .eth_vlans      = rb133c_vlans,
137         .num_devices    = ARRAY_SIZE(rb1xx_devices),
138         .devices        = rb1xx_devices,
139 };
140
141 static struct adm5120_board rb150_board __initdata = {
142         .mach_type      = MACH_ADM5120_RB_150,
143         .name           = "Mikrotik RouterBOARD 150",
144         .board_setup    = rb1xx_setup,
145         .eth_num_ports  = 5,
146         .eth_vlans      = rb15x_vlans,
147         .num_devices    = ARRAY_SIZE(rb150_devices),
148         .devices        = rb150_devices,
149 };
150
151 static struct adm5120_board rb153_board __initdata = {
152         .mach_type      = MACH_ADM5120_RB_153,
153         .name           = "Mikrotik RouterBOARD 153",
154         .board_setup    = rb1xx_setup,
155         .eth_num_ports  = 5,
156         .eth_vlans      = rb15x_vlans,
157         .num_devices    = ARRAY_SIZE(rb1xx_devices),
158         .devices        = rb1xx_devices,
159 };
160
161 static int __init register_boards(void)
162 {
163         adm5120_board_register(&rb111_board);
164         adm5120_board_register(&rb112_board);
165         adm5120_board_register(&rb133_board);
166         adm5120_board_register(&rb133c_board);
167         adm5120_board_register(&rb150_board);
168         adm5120_board_register(&rb153_board);
169         return 0;
170 }
171
172 pure_initcall(register_boards);